bt2004 Posted February 27, 2011 Posted February 27, 2011 I've been using ImgBurn for a while now and have burned many discs without a problem. I tried using it a few days ago, but it seems to always get stuck at writing leadin. The elapsed time still runs and the computer works normally, except that I can't abort and I can't eject the disc after closing imgburn with taskmanager. I restarted my computer and tried to burn it again and it worked. I tried to burn another disc but got the same problem as before. I thought that resetting the computer would work again, but now it gets stuck at writing leadin even if I restart my computer.It just stays at 0% and I've left it for hours, but it hangs there. I'm using my desktop computer and Verbatim DVD-R discs. Here is the log: I 08:21:14 ImgBurn Version 2.5.5.0 started! I 08:21:14 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 08:21:14 Total Physical Memory: 3,012,364 KB - Available: 1,926,172 KB I 08:21:14 Initialising SPTI... I 08:21:14 Searching for SCSI / ATAPI devices... I 08:21:14 -> Drive 1 - Info: TSSTcorp CDDVDW TS-H653Z 4403 (E:) (ATA) I 08:21:14 Found 1 DVD±RW/RAM! I 08:42:39 Operation Started! I 08:42:39 Source File: C:\Users\Brian Tran\Desktop\12345AYSta5thGBTS(compress).iso I 08:42:39 Source File Sectors: 2,294,912 (MODE1/2048) I 08:42:39 Source File Size: 4,699,979,776 bytes I 08:42:39 Source File Volume Identifier: Are You Smarter? BTS I 08:42:39 Source File File System(s): Special I 08:42:40 Destination Device: [2:1:0] TSSTcorp CDDVDW TS-H653Z 4403 (E:) (ATA) I 08:42:40 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x) I 08:42:40 Destination Media Sectors: 2,297,888 I 08:42:40 Write Mode: DVD I 08:42:40 Write Type: DAO I 08:42:40 Write Speed: 4x I 08:42:40 Link Size: Auto I 08:42:40 Lock Volume: Yes I 08:42:40 Test Mode: No I 08:42:40 OPC: No I 08:42:40 BURN-Proof: Enabled I 08:42:42 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 08:42:44 Filling Buffer... (40 MB) I 08:42:45 Writing LeadIn... I hope someone can help please, I've wasted many discs trying to burn this.
Rincewind Posted February 27, 2011 Posted February 27, 2011 Try at higher speeds see if that makes any difference. It could be that your discs aren't very good. CMC MAG. AM3 These usually aren't regarded as good quality discs. Look for Verbatim DVD+R with disc ID MCC (for single layer). I am also assuming your firmware to your drive is up to date. Clean your burner with a cleaning disc. Also try updating your drivers to your controllers, perhaps that is also a reason for the hanging.
bt2004 Posted February 27, 2011 Author Posted February 27, 2011 Thanks for the help,I'll try to get some better discs and see if it works. I tried to find a firmware update for my driver, but I can't find it. Its a TSSTcorp CDDVDW TS-H653Z SCSI CdRom Device. Do you know why it sometimes works if I restart though?
Rincewind Posted February 27, 2011 Posted February 27, 2011 My only guess is that might be due to your chipset driver perhaps? See if there are any updates for your chipset as well.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now