Verbatim DVD+R DL burn failure

[tWreCK]

I'm getting the following error while trying to burn Verbatim DVD+R DL discs:

 

I 21:27:29 Preparing Image...

I 21:27:35 Using Layer Break LBA: 2079015 -> 2079024 (VTS_02, PGC: 1, Chapter: 11, Cell: 11, Vob/Cell ID: 1/11, Time: 00:36:42, SPLIP: No -> Yes)

I 21:27:35 Checking Path Length...

I 21:27:35 Contents: 31 Files, 2 Folders

I 21:27:35 Content Type: DVD Video

I 21:27:35 Data Type: MODE1/2048

I 21:27:35 File System(s): ISO9660, UDF (1.02)

I 21:27:35 Volume Label: ESTPIO

I 21:27:35 IFO/BUP 32K Padding: Enabled

I 21:27:35 Region Code: 1, 2, 3, 4, 5, 6, 8

I 21:27:35 TV System: NTSC

I 21:27:35 Size: 8,180,080,640 bytes

I 21:27:35 Sectors: 3,994,180

I 21:27:35 Image Size: 8,180,727,808 bytes

I 21:27:35 Image Sectors: 3,994,496

I 21:27:36 Operation Successfully Completed! - Duration: 00:00:08

I 21:27:36 Operation Started!

I 21:27:36 Source File: -==/\/[bUILD IMAGE]\/\==-

I 21:27:36 Source File Sectors: 3,994,496 (MODE1/2048)

I 21:27:36 Source File Size: 8,180,727,808 bytes

I 21:27:36 Source File Volume Identifier: ESTPIO

I 21:27:37 Source File Volume Set Identifier: 3E63AB6E003CF37A

I 21:27:37 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER!

I 21:27:37 Source File Implementation Identifier: ImgBurn

I 21:27:37 Source File File System(s): ISO9660, UDF (1.02)

I 21:27:37 Destination Device: [1:0:0] ATAPI iHAP322 9 6L1E (G:) (ATA)

I 21:27:37 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)

I 21:27:37 Destination Media Sectors: 4,173,824

I 21:27:37 Write Mode: DVD

I 21:27:37 Write Type: DAO

I 21:27:37 Write Speed: 4x

I 21:27:37 Link Size: Auto

I 21:27:37 Lock Volume: Yes

I 21:27:37 Test Mode: No

I 21:27:37 OPC: No

I 21:27:37 BURN-Proof: Enabled

I 21:27:37 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 21:27:37 Book Type Setting: DVD-ROM

I 21:27:37 Advanced Settings - Force HT: No, Online HT: Yes, OverSpeed: No, SmartBurn: Yes

I 21:27:37 Optimal L0 Data Zone Capacity: 2,079,024

I 21:27:37 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set

I 21:28:24 Set L0 Data Zone Capacity Succeeded!

I 21:28:24 Filling Buffer... (50 MB)

I 21:28:25 Writing LeadIn...

I 21:28:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3994495)

I 21:28:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3994495)

I 21:28:27 Writing Layer 0... (LBA: 0 - 2079023)

I 21:41:25 Writing Layer 1... (LBA: 2079024 - 3994495)

I 21:53:23 Synchronising Cache...

I 21:53:52 Closing Track...

I 21:53:55 Finalising Disc...

W 22:00:36 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 22:00:36 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

W 22:00:36 Retrying (1 of 3)...

W 22:05:54 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 22:05:55 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 22:05:55 Retrying (2 of 3)...

W 22:12:19 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 22:12:19 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 22:12:19 Retrying (3 of 3)...

W 22:19:03 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Session Fixation Error Writing Lead Out

W 22:19:03 Retry Failed - Reason: Session Fixation Error Writing Lead Out

E 22:32:59 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

I 22:32:59 Finalising Disc (Last Attempt!)...

I 22:34:43 Exporting Graph Data...

I 22:34:43 Graph Data File: C:\Documents and Settings\tWreCK\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAP322_9_6L1E_THURSDAY-MARCH-03-2011_21-27_MKM-003-00_4x.ibg

I 22:34:43 Export Successfully Completed!

I 22:34:43 Operation Successfully Completed! - Duration: 01:07:06

I 22:34:43 Average Write Rate: 5,343 KB/s (3.9x) - Maximum Write Rate: 6,062 KB/s (4.4x)

 

I have never had any problems in the past with these discs. Why am I getting this error? Any help is greatly appreciated.

 

Thx in advance..........

[Cynthia]

There is a later firmware.

 

http://www.firmwarehq.com/Lite-On/iHAP322%2B9/files.html

 

6L1E is what you have now.

 

Tried the 6x, 8x write speeds?

[tWreCK]

I flashed it to 6L1H and upon reboot windows was asking me to install device drivers. Tried the automatic option but no luck. I uninstalled the secondary IDE channel and rebooted but same result. How do I get rid of the exclamation mark on the drive in device manager? I'm using microsofts standard IDE channel drivers. Can't use the chipset manufacturers (nVidia) because they cause corruption and the system won't boot with them so that's a no go. What to do now?

[Rincewind]

Perhaps it is just that version of the nvidia chipset drivers that are the problem? Go check for any updates, just because a particular version causes such issues doesn't necessarily mean all versions will do that. Also it will guarantee that you get proper performance, and less chance of buffer underruns.

[tWreCK]

This is an older mobo - ABIT NF7-S v2 and there aren't any other versions of chipset drivers available on the net than what's on the nvidia legacy driver site. nVidia's IDE drivers for that chipset nForce 2 were notorious for instability etc and no one used/uses them for that reason. The std Microsoft drivers have worked flawlessly through the years so there's no reason to change that now - especially with this old board. The problem is XP is asking for drivers upon every boot now and I don't want to reinstall the OS just for this. There has to be a solution somewhere. I can still burn etc with this new firmware so I'm going to try a DVD+R-DL burn and see what happens - it can't get any worse than it was with the other firmware........

 

From what I can tell in the Imgburn log it wasn't a buffer underrun that caused the problem -> Session Fixation Error Writing Lead Out

Edited March 5, 2011 by tWreCK

[Rincewind]

Sorry I just assumed that generic drivers wouldn't necessarily give out great performances. I am running an nforce board right now and no issues whatsoever, hrmm. Be that as it may, do you have an XP CD? Perhaps just try reloading the drivers, and have windows search the XP CD and see if that clears up the install new hardware issue?

[ianymaty]

Visiting Microsoft Update might discover that you don't have the drivers installed and suggest and provide them to install

[tWreCK]

Good suggestions - I'll try that right now. Thx for the input I'll report back.....

[tWreCK]

Unfortunately the suggestions didn't work - every time I reboot/start windows the found new hardware wizard appears asking to install drivers. The weird thing is that in device manager everything looks ok - the drive has no exclamation mark and it says it's installed and working properly? I can burn discs fine with the drive and as far as I can tell it's working properly. How do I get rid of the annoying driver installation wizard that appears everytime I start/reboot? All/any help is greatly appreciated.......

Edited March 6, 2011 by tWreCK

[ianymaty]

I'll start by going to ABIT site and download and install the latest BIOS update, than try the latest NVIDIA chipset/storage controller driver.

[tWreCK]

I have all the latest drivers and bios as well - like I mentioned above, this is an old board so there won't be any more updates with regards to drivers etc. I just need to get rid of that pesky found new hardware wizard popping up..........

[ianymaty]

Take a look at what's starting up with the system maybe you can find something related to driver install that is persistent.

 

Use this little tool http://www.nirsoft.net/utils/what_run_in_startup.html