Jump to content

Whats the problem?


Phen
 Share

Recommended Posts

Hey guys, I'm new to ImgBurn and I have a question regarding a game I tried to burn.

 

Ok so I have a DVD-R and a Wii. I tried to burn a Gamecube game on the DVD with ImgBurn. Here is the log:

 

 

I 12:43:44 Export Successfully Completed!

I 12:43:44 Operation Successfully Completed! - Duration: 00:07:34

I 12:43:44 Average Write Rate: 4.386 KB/s (3.2x) - Maximum Write Rate: 5.592 KB/s (4.0x)

I 12:43:44 Cycling Tray before Verify...

W 12:43:49 Waiting for device to become ready...

I 12:44:08 Device Ready!

I 12:44:09 Operation Started!

I 12:44:09 Source Device: [0:0:0] PIONEER DVD-RW DVR-K16M 1.00 (D:) (ATA)

I 12:44:09 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 2x; 4x; 6x; 8x)

I 12:44:09 Image File: C:\Archivos de programa\JDownloader\downloads\ws_p2_ntsc.iso

I 12:44:09 Image File Sectors: 712.880 (MODE1/2048)

I 12:44:09 Image File Size: 1.459.978.240 bytes

I 12:44:09 Image File Volume Identifier: PIKMIN2 for GAMECUBE

I 12:44:09 Image File File System(s): Special

I 12:44:09 Read Speed (Data/Audio): MAX / MAX

I 12:44:09 Verifying Session 1 of 1... (1 Track, LBA: 0 - 712879)

I 12:44:09 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 712879)

I 12:48:43 Exporting Graph Data...

I 12:48:44 Graph Data File: C:\Documents and Settings\Usuario\Datos de programa\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-K16M_1.00_DOMINGO-06-DE-MARZO-DE-2011_12-36_CMC_MAG._AM3_8x.ibg

I 12:48:44 Export Successfully Completed!

I 12:48:44 Operation Successfully Completed! - Duration: 00:04:34

I 12:48:44 Average Verify Rate: 5.203 KB/s (3.8x) - Maximum Verify Rate: 14.309 KB/s (10.3x)

 

Everything seems OK by the moment, there are no errors. So, after it burns I put it into my Nintendo Wii, the Gamecube logo appears on the Disc Channel, I click start and wait. Here is the problem: nothing loads! After I click start the screen goes black and nothing happens! The iso I downloaded is 1.35 GB and it's on NTSC format (same as my Wii). I don't get whats going on, is it the DVD? The burning process? The iso? Whats the problem? I don't get it. I have successfully burned other Wii games with the same type of DVD's and this is the first time I try to burn with a GCN game if that helps.

 

Any suggestions?

Link to comment
Share on other sites

Nothing we can help you with. If imgburn burned and verified successfully, then it is out of our hands since we don't help with copied console games, unless there is a burning/verifying problem only. I'm afraid you will have to solve this yourself.

Edited by Rincewind
Link to comment
Share on other sites

Nothing we can help you with. If imgburn burned and verified successfully, then it is out of our hands since we don't help with copied console games, unless there is a burning/verifying problem only. I'm afraid you will have to solve this yourself.

 

Ok thanks for the info.

Link to comment
Share on other sites

I 12:44:09 Source Device: [0:0:0] PIONEER DVD-RW DVR-K16M 1.00 (D:) (ATA)

I 12:44:09 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 2x; 4x; 6x; 8x)

 

Anyway, it appears there is an firmware update for your drive 1.10, you currently have 1.00 installed. http://www.sony-asia.com/support/download/61505/sectionfirst?subpage=detail

 

Maybe you should use DVD+R that can be book typed to DVD-ROM instead of DVD-R...

Link to comment
Share on other sites

I 12:44:09 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AM3) (Speeds: 2x; 4x; 6x; 8x)

 

You might want to try some better quality media as well. CMC Magnetics is garbage. It's been garbage for as long as I can remember. Try Taiyo Yuden (my preference) or legitimate Verbatim media.

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.