KenVal Posted March 12, 2011 Posted March 12, 2011 (edited) I 17:20:34 ImgBurn Version 2.5.5.0 started! I 17:20:34 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 17:20:34 Total Physical Memory: 6,249,552 KB - Available: 4,814,940 KB W 17:20:34 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 17:20:34 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:20:34 Initialising SPTI... I 17:20:34 Searching for SCSI / ATAPI devices... I 17:20:34 -> Drive 1 - Info: HL-DT-ST BD-RE BH20N A102 (E:) (ATAPI) I 17:20:34 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223L SB02 (D:) (ATAPI) I 17:20:34 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI) I 17:20:34 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 17:21:24 Operation Started! I 17:21:24 Device: [0:2:0] HL-DT-ST BD-RE BH20N A102 (E:) (ATAPI) I 17:21:24 Media Type: BD-RE (Disc ID: VERBAT-IM0-000) (Speeds: 2.4x) I 17:21:24 Quick Erase: No I 17:21:24 Format Properly: Yes I 17:21:24 Format Size: Maximum I 17:21:24 Format With Full Certification: Yes I 17:21:24 Format Without Spare Areas: Yes I 17:21:24 Erasing Disc... Having recoded on the disc using ingburn I cannot erase on full format..stays stuck on 0% Erase ?? Over 2hrs now with no change. I have exited grom AnyDVD HD as instructed...I am obviously a plonker but cannot see proble. Edited March 12, 2011 by KenVal
mmalves Posted March 13, 2011 Posted March 13, 2011 If it hasn't finished yet, restart your computer, take the disc out and update your burner's firmware (restart again after updating). Then try doing the Full Erase again.
KenVal Posted March 13, 2011 Author Posted March 13, 2011 If it hasn't finished yet, restart your computer, take the disc out and update your burner's firmware (restart again after updating). Then try doing the Full Erase again. No new firmware - says up to date & nothing on this particular drive on line..( HL-DT-ST BD RE BH20N )
mmalves Posted March 13, 2011 Posted March 13, 2011 You did see the link in my post, right? Is that firmware updater saying your drive isn't compatible or something?
KenVal Posted March 15, 2011 Author Posted March 15, 2011 You did see the link in my post, right? Is that firmware updater saying your drive isn't compatible or something? Sorry did not see the link - Many thanks for your kind help, this seems to have resolved issue.
Recommended Posts