Murph Posted March 13, 2011 Posted March 13, 2011 I am new to using ImgBurn. I have read through multiple areas of the Guides, but cannot get my pc to read the disk. I have a Sony Handycam that failed to be finalize the disk. I was able to use the Close - Track, Session, Disc, so I now can see the following: TSSTcorp CDDVDW TS-H653Z 4403 (RAID) Current Profile: DVD-R Disc Information: Status: Incomplete State of Last Session: Empty Erasable: No Sessions: 3 Sectors: 288 Size: 589,824 bytes Time: 00:05:63 (MM:SS:FF) Free Sectors: 438,384 Free Space: 897,810,432 bytes Free Time: 97:27:09 (MM:SS:FF) Next Writable Address: 277808 TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 93951) Session 2... (LBA: 93952) -> Track 02 (Mode 1, LBA: 93952 - 287) -> LeadOut (LBA: 288) Track Information: Session 1... -> Track 01 (LTSA: 0, LTS: 65264, LRA: 287) Session 2... -> Track 02 (LTSA: 93952, LTS: 177696, LRA: 0) Pre-recorded Information: Manufacturer ID: 80SONY-R0 Recording Management Area Information: PLDS DVD+-RW DL-8ATS Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 80mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 I cannot figure out how to gain access to the two tracks and create an image to be able to view them. Please help. I appreciate your responses. ImgBurn log.log
mmalves Posted March 13, 2011 Posted March 13, 2011 Try IsoBuster for extracting the contents of that disc.
Rincewind Posted March 13, 2011 Posted March 13, 2011 (edited) Well according to the log imgburn did copy both sessions, and created a .bin file for it so you should also have a .cue file as well. Use a virtual drive program like deamon-tools and have it emulate the image, and see what comes up. Thats all I can think of right now. Edited March 13, 2011 by Rincewind
Murph Posted March 13, 2011 Author Posted March 13, 2011 Ok. Thanks for the info. I'll give them a try.
Recommended Posts