Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

[petrhu]

Hi,

 

I can't burn DL DVD, because "Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error". Month ago, I brund DVD DL successful. I use Verbatim DVD+R DL. My computer is Lenovo R61 with orginal DVD writer. I can burn these DVD on other computer, it works. I can burn

 

I've read tons of questions like that, but nothing help. (http://forum.imgburn.com/index.php?showtopic=8000)

 

(sorry for my poor english)

 

I 21:54:35 ImgBurn Version 2.5.5.0 started!
I 21:54:35 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 21:54:35 Total Physical Memory: 2 054 372 KB  -  Available: 481 644 KB
W 21:54:35 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 21:54:35 Initialising SPTI...
I 21:54:35 Searching for SCSI / ATAPI devices...
I 21:54:35 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-850 z RB21 (I:) (ATA)
I 21:54:35 -> Drive 2 - Info: BKHIL 1E3WXEBWDUVC 1.03 (H:) (SCSI)
I 21:54:35 -> Drive 3 - Info: WD Virtual CD 1110 1030 (E:) (USB)
I 21:54:35 Found 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 Unknown!
I 22:05:57 Operation Started!
I 22:05:57 Source File: <file>.dvd
I 22:05:57 Source File Sectors: 3 827 488 (MODE1/2048)
I 22:05:57 Source File Size: 7 838 695 424 bytes
I 22:05:57 Source File Volume Identifier: DVD_ROM
I 22:05:57 Source File Volume Set Identifier: 1b018000MS UDFBridge
I 22:05:57 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 22:05:57 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 22:05:57 Source File File System(s): ISO9660; UDF (1.50)
I 22:05:57 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-850 z RB21 (I:) (ATA)
I 22:05:57 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x)
I 22:05:57 Destination Media Sectors: 4 173 824
I 22:05:57 Write Mode: DVD
I 22:05:57 Write Type: DAO
I 22:05:57 Write Speed: 2,4x
I 22:05:57 Link Size: Auto
I 22:05:57 Lock Volume: Yes
I 22:05:57 Test Mode: No
I 22:05:57 OPC: No
I 22:05:57 BURN-Proof: Enabled
I 22:05:57 Write Speed Successfully Set! - Effective: 3 324 KB/s (2,4x)
I 22:05:57 Optimal L0 Data Zone Capacity: 1 913 760
I 22:05:57 Optimal L0 Data Zone Method: Copied From Original Disc
E 22:06:39 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error
E 22:06:39 Operation Failed! - Duration: 00:00:42
I 22:06:39 Average Write Rate: N/A - Maximum Write Rate: N/A

[ianymaty]

There's no much we can do, sorry.

 

If the first 3 points don't work, the 4 and 5 sure will make the difference.