JMack420 Posted March 21, 2011 Posted March 21, 2011 I 17:16:18 ImgBurn Version 2.5.5.0 started! I 17:16:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 17:16:18 Total Physical Memory: 4,193,396 KB - Available: 1,836,412 KB I 17:16:18 Initialising SPTI... I 17:16:18 Searching for SCSI / ATAPI devices... I 17:16:18 -> Drive 1 - Info: Optiarc DVD RW AD-5170A 1.G6 (D:) (ATA) I 17:16:18 -> Drive 2 - Info: PIONEER DVD-RW DVR-116D 1.06 (E:) (ATA) I 17:16:18 -> Drive 3 - Info: ELBY CLONEDRIVE 1.4 (L:) (SCSI) I 17:16:18 -> Drive 4 - Info: ELBY CLONEDRIVE 1.4 (N:) (SCSI) I 17:16:18 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (M:) (SCSI) I 17:16:18 Found 2 DVD±RWs and 3 BD-ROM/HD DVD-ROMs! I 17:16:54 Operation Started! I 17:16:54 Source File: P:\Grabit Downloads\Call.of.Duty.4.Modern.Warfare.RF.XBOX360-DERKA\derka-cod4.dvd I 17:16:54 Source File Sectors: 3,825,924 (MODE1/2048) I 17:16:54 Source File Size: 7,835,492,352 bytes I 17:16:54 Source File Volume Identifier: XGD2DVD_NTSC I 17:16:54 Source File Volume Set Identifier: 34672923 I 17:16:54 Source File Implementation Identifier: Sonic Scenarist 3.1 I 17:16:54 Source File File System(s): ISO9660, UDF (1.02) I 17:16:54 Destination Device: [2:1:0] PIONEER DVD-RW DVR-116D 1.06 (E:) (ATA) I 17:16:54 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x, 8x) I 17:16:54 Destination Media Sectors: 4,173,824 I 17:16:54 Write Mode: DVD I 17:16:54 Write Type: DAO I 17:16:54 Write Speed: 2.4x I 17:16:54 Link Size: Auto I 17:16:54 Lock Volume: Yes I 17:16:54 Test Mode: No I 17:16:54 OPC: No I 17:16:54 BURN-Proof: Enabled I 17:16:54 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 17:16:54 Advanced Settings - Optimal Writing Speed: No I 17:16:54 Optimal L0 Data Zone Capacity: 1,913,760 I 17:16:54 Optimal L0 Data Zone Method: Copied From Original Disc W 17:17:11 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 17:17:11 Waiting for device to become ready... I 17:17:27 Abort Request Acknowledged W 17:17:27 Retrying (1)... E 17:17:27 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 17:17:31 Operation Failed! - Duration: 00:00:33 I 17:17:31 Average Write Rate: N/A - Maximum Write Rate: N/A
Rincewind Posted March 21, 2011 Posted March 21, 2011 (edited) There is a firmware update for your burner (PIONEER DVD-RW DVR-116D 1.06) http://www.firmwarehq.com/download_109-file_DVR-116D_FW109EU2.EXE.html After that try again, and also try a faster speed. Edited March 21, 2011 by Rincewind
Recommended Posts