canefanatic777 Posted April 4, 2011 Share Posted April 4, 2011 (edited) Ive had 5 successful burns using memorex and verbatim and now i keep getting these errors. Before it would just say L0 Data Zone Capacity Miscompare! in the beginning and then fail at 51%. Now it instantly fails with the servo error. Heres the log: I 20:49:34 ImgBurn Version 2.5.5.0 started! I 20:49:34 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 20:49:34 Total Physical Memory: 2,858,900 KB - Available: 1,775,256 KB W 20:49:34 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 20:49:34 Initialising SPTI... I 20:49:34 Searching for SCSI / ATAPI devices... I 20:49:34 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 20:49:34 -> Drive 2 - Info: HL-DT-ST DVDRW GS23N SB03 (D:) (ATA) I 20:49:34 -> Drive 3 - Info: HL-DT-ST DVDRAM GE20LU11 CL01 (G:) (USB) I 20:49:34 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM! I 20:58:49 Operation Started! I 20:58:49 Source File: C:\Users\Lawrence\Desktop\GTA\gta4.dvd I 20:58:49 Source File Sectors: 3,825,924 (MODE1/2048) I 20:58:49 Source File Size: 7,835,492,352 bytes I 20:58:49 Source File Volume Identifier: XGD2DVD_NTSC I 20:58:49 Source File Volume Set Identifier: 34672923 I 20:58:49 Source File Implementation Identifier: Sonic Scenarist 3.1 I 20:58:49 Source File File System(s): ISO9660, UDF (1.02) I 20:58:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20LU11 CL01 (G:) (USB) I 20:58:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 20:58:49 Destination Media Sectors: 4,173,824 I 20:58:49 Write Mode: DVD I 20:58:49 Write Type: DAO I 20:58:49 Write Speed: 2.4x I 20:58:49 Link Size: Auto I 20:58:49 Lock Volume: Yes I 20:58:49 Test Mode: No I 20:58:49 OPC: No I 20:58:49 BURN-Proof: Enabled I 20:58:49 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 20:58:49 Book Type Setting: DVD-ROM I 20:58:49 User Specified L0 Data Zone Capacity: 1,913,760 W 20:58:49 L0 Data Zone Capacity Miscompare! W 20:58:49 Wanted: 1913760, Got: 2086912 I 20:58:50 Filling Buffer... (40 MB) I 20:58:51 Writing LeadIn... I 20:59:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 20:59:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 20:59:30 Writing Layer 0... (LBA: 0 - 1913759) W 20:59:32 Failed to Write Sectors 10336 - 10367 - Reason: Spindle Servo Failure W 20:59:32 Retrying (1 of 20)... W 20:59:32 Retry Failed - Reason: Spindle Servo Failure W 20:59:32 Retrying (2 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (3 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (4 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (5 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (6 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (7 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (8 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (9 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (10 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (11 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (12 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (13 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (14 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (15 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (16 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (17 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (18 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (19 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (20 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:42 Retrying (21)... W 20:59:42 Retry Failed - Reason: Invalid Address For Write W 20:59:43 Retrying (22)... W 20:59:43 Retry Failed - Reason: Invalid Address For Write E 20:59:44 Failed to Write Sectors 10336 - 10367 - Reason: Spindle Servo Failure E 20:59:44 Next Writable Address: 9808 I 20:59:44 Synchronising Cache... I 20:59:46 Closing Track... I 20:59:49 Finalising Disc... W 21:01:59 Potential 'WaitImmediateIO' Deferred Error - (2%, 0/3) - No Seek Complete W 21:01:59 Finalise Disc Failed! - Reason: No Seek Complete W 21:01:59 Retrying (1 of 3)... E 21:02:00 Failed to Write Image! I 21:02:00 Exporting Graph Data... I 21:02:00 Graph Data File: C:\Users\Lawrence\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20LU11_CL01_SUNDAY-APRIL-03-2011_8-58_PM_MKM-003-00_2.4x.ibg I 21:02:00 Export Successfully Completed! E 21:02:00 Operation Failed! - Duration: 00:03:11 I 21:02:00 Average Write Rate: 1,590 KB/s (1.1x) - Maximum Write Rate: 1,590 KB/s (1.1x) W 21:06:17 Device Removal Detected! I 21:06:17 Searching for SCSI / ATAPI devices... I 21:06:17 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 21:06:17 -> Drive 2 - Info: HL-DT-ST DVDRW GS23N SB03 (D:) (ATA) I 21:06:17 Found 1 DVD±RW and 1 BD-ROM! Edited April 4, 2011 by canefanatic777 Link to comment Share on other sites More sharing options...
Cynthia Posted April 4, 2011 Share Posted April 4, 2011 Two issues, that could indicate a dying burner. The other speeds like 4x, 6x, 8x - also gives issues? I 20:58:49 User Specified L0 Data Zone Capacity: 1,913,760W 20:58:49 L0 Data Zone Capacity Miscompare! W 20:58:49 Wanted: 1913760, Got: 2086912 Reason: Spindle Servo Failure Link to comment Share on other sites More sharing options...
Recommended Posts