canefanatic777 Posted April 4, 2011 Posted April 4, 2011 (edited) Ive had 5 successful burns using memorex and verbatim and now i keep getting these errors. Before it would just say L0 Data Zone Capacity Miscompare! in the beginning and then fail at 51%. Now it instantly fails with the servo error. Heres the log: I 20:49:34 ImgBurn Version 2.5.5.0 started! I 20:49:34 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 20:49:34 Total Physical Memory: 2,858,900 KB - Available: 1,775,256 KB W 20:49:34 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 20:49:34 Initialising SPTI... I 20:49:34 Searching for SCSI / ATAPI devices... I 20:49:34 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 20:49:34 -> Drive 2 - Info: HL-DT-ST DVDRW GS23N SB03 (D:) (ATA) I 20:49:34 -> Drive 3 - Info: HL-DT-ST DVDRAM GE20LU11 CL01 (G:) (USB) I 20:49:34 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM! I 20:58:49 Operation Started! I 20:58:49 Source File: C:\Users\Lawrence\Desktop\GTA\gta4.dvd I 20:58:49 Source File Sectors: 3,825,924 (MODE1/2048) I 20:58:49 Source File Size: 7,835,492,352 bytes I 20:58:49 Source File Volume Identifier: XGD2DVD_NTSC I 20:58:49 Source File Volume Set Identifier: 34672923 I 20:58:49 Source File Implementation Identifier: Sonic Scenarist 3.1 I 20:58:49 Source File File System(s): ISO9660, UDF (1.02) I 20:58:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GE20LU11 CL01 (G:) (USB) I 20:58:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x) I 20:58:49 Destination Media Sectors: 4,173,824 I 20:58:49 Write Mode: DVD I 20:58:49 Write Type: DAO I 20:58:49 Write Speed: 2.4x I 20:58:49 Link Size: Auto I 20:58:49 Lock Volume: Yes I 20:58:49 Test Mode: No I 20:58:49 OPC: No I 20:58:49 BURN-Proof: Enabled I 20:58:49 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 20:58:49 Book Type Setting: DVD-ROM I 20:58:49 User Specified L0 Data Zone Capacity: 1,913,760 W 20:58:49 L0 Data Zone Capacity Miscompare! W 20:58:49 Wanted: 1913760, Got: 2086912 I 20:58:50 Filling Buffer... (40 MB) I 20:58:51 Writing LeadIn... I 20:59:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 20:59:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 20:59:30 Writing Layer 0... (LBA: 0 - 1913759) W 20:59:32 Failed to Write Sectors 10336 - 10367 - Reason: Spindle Servo Failure W 20:59:32 Retrying (1 of 20)... W 20:59:32 Retry Failed - Reason: Spindle Servo Failure W 20:59:32 Retrying (2 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (3 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (4 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (5 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (6 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (7 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (8 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (9 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (10 of 20)... W 20:59:32 Retry Failed - Reason: Invalid Address For Write W 20:59:32 Retrying (11 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (12 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (13 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (14 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (15 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (16 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (17 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (18 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (19 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:33 Retrying (20 of 20)... W 20:59:33 Retry Failed - Reason: Invalid Address For Write W 20:59:42 Retrying (21)... W 20:59:42 Retry Failed - Reason: Invalid Address For Write W 20:59:43 Retrying (22)... W 20:59:43 Retry Failed - Reason: Invalid Address For Write E 20:59:44 Failed to Write Sectors 10336 - 10367 - Reason: Spindle Servo Failure E 20:59:44 Next Writable Address: 9808 I 20:59:44 Synchronising Cache... I 20:59:46 Closing Track... I 20:59:49 Finalising Disc... W 21:01:59 Potential 'WaitImmediateIO' Deferred Error - (2%, 0/3) - No Seek Complete W 21:01:59 Finalise Disc Failed! - Reason: No Seek Complete W 21:01:59 Retrying (1 of 3)... E 21:02:00 Failed to Write Image! I 21:02:00 Exporting Graph Data... I 21:02:00 Graph Data File: C:\Users\Lawrence\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GE20LU11_CL01_SUNDAY-APRIL-03-2011_8-58_PM_MKM-003-00_2.4x.ibg I 21:02:00 Export Successfully Completed! E 21:02:00 Operation Failed! - Duration: 00:03:11 I 21:02:00 Average Write Rate: 1,590 KB/s (1.1x) - Maximum Write Rate: 1,590 KB/s (1.1x) W 21:06:17 Device Removal Detected! I 21:06:17 Searching for SCSI / ATAPI devices... I 21:06:17 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual) I 21:06:17 -> Drive 2 - Info: HL-DT-ST DVDRW GS23N SB03 (D:) (ATA) I 21:06:17 Found 1 DVD±RW and 1 BD-ROM! Edited April 4, 2011 by canefanatic777
Cynthia Posted April 4, 2011 Posted April 4, 2011 Two issues, that could indicate a dying burner. The other speeds like 4x, 6x, 8x - also gives issues? I 20:58:49 User Specified L0 Data Zone Capacity: 1,913,760W 20:58:49 L0 Data Zone Capacity Miscompare! W 20:58:49 Wanted: 1913760, Got: 2086912 Reason: Spindle Servo Failure
Recommended Posts