99% Completes and Stops

[steven_video]

I am trying to copy a BD-R DL disk with about 30GB of video to disk. The process seems to stall at 99% completion, please seelog below and let me know what I can do to correct.

 

I 14:06:53 ImgBurn Version 2.5.5.0 started!

I 14:06:53 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)

I 14:06:53 Total Physical Memory: 14,677,560 KB - Available: 12,320,304 KB

W 14:06:53 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 14:06:53 Initialising SPTI...

I 14:06:53 Searching for SCSI / ATAPI devices...

I 14:06:53 -> Drive 1 - Info: HL-DT-ST DVD+-RW GH50N B104 (D:) (ATAPI)

I 14:06:53 -> Drive 2 - Info: PIONEER BD-RW BDR-206 1.04 (E:) (ATAPI)

I 14:06:53 Found 1 DVD±RW/RAM and 1 BD-RE!

I 14:09:06 Operation Started!

I 14:09:06 Source Device: [0:2:0] PIONEER BD-RW BDR-206 1.04 (E:) (ATAPI)

I 14:09:06 Source Media Type: BD-R (Disc ID: MEI-T01-001) (Speeds: 2x)

I 14:09:06 Source Media Sectors: 23,652,352

I 14:09:06 Source Media Size: 48,440,016,896 bytes

I 14:09:06 Source Media Volume Identifier: Secret Garden 2011

I 14:09:06 Source Media Volume Set Identifier: b6635613Secret Garden 2011

I 14:09:06 Source Media Application Identifier: Sonic Solutions

I 14:09:06 Source Media Implementation Identifier: AS_Storage 4.20.13.0

I 14:09:06 Source Media File System(s): UDF (2.60)

I 14:09:06 Read Speed (Data/Audio): MAX / 8x

I 14:09:06 Destination File: C:\Secret Garden 2011.bin

I 14:09:06 Destination Free Space: 380,517,175,296 Bytes (371,598,804 KB) (362,889 MB) (354 GB)

I 14:09:06 Destination File System: NTFS

I 14:09:06 File Splitting: Auto

I 14:09:07 Reading Session 1 of 1... (3 Tracks, LBA: 0 - 23652351)

I 14:09:07 Reading Track 1 of 3... (MODE1/2048, LBA: 0 - 10015)

I 14:09:09 Reading Track 2 of 3... (MODE1/2048, LBA: 10016 - 23652063)

I 14:09:09 Reading Layer 0... (LBA: 10016 - 12219391)

I 14:26:04 Reading Layer 1... (LBA: 12219392 - 23652063)

I 14:41:40 Reading Track 3 of 3... (MODE1/2048, LBA: 23652064 - 23652351)

I 14:56:35 Abort Request Acknowledged

E 14:56:35 Failed to Read Sectors!

I 14:56:39 Exporting Graph Data...

I 14:56:39 Graph Data File: C:\Users\Steven Beaver\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.04_WEDNESDAY-APRIL-06-2011_2-09_PM_MEI-T01-001.ibg

I 14:56:39 Export Successfully Completed!

E 14:56:39 Operation Aborted! - Duration: 00:47:28

E 14:56:39 Average Read Rate: 16,609 KB/s (3.7x) - Maximum Read Rate: 38,267 KB/s (8.5x)

[LIGHTNING UK!]

Don't do it like that, use Build mode and point it at your E: drive.

 

That'll get you a decent new single session/track image rather than what you've got now.

[steven_video]

Don't do it like that, use Build mode and point it at your E: drive.

 

That'll get you a decent new single session/track image rather than what you've got now.

I was able to do as you suggested and it created a .bin file and I was able to burn a disk from this image. I do have a question which I hope you or someone else can answer. What is the reason the image file is a .bin and not an .iso?

 

I am happy with using the .bin as it gets the job done. I am just one of those gear heads who likes to understand why iso is not used for this purpose.

 

Thank you and best regards,

Steven

[LIGHTNING UK!]

It sounds like you're still using Read mode and not Build mode like I said.

 

i.e. you used the 'Create image file from disc' button rather than 'Create image file from files/folder' button on the Ez-Mode Picker screen.

 

Well, it's that or you've changed the 'Data Type' option to 'Mode2/Form1/2352' when it should be on 'Mode1/2048'.

[steven_video]

It sounds like you're still using Read mode and not Build mode like I said.

 

i.e. you used the 'Create image file from disc' button rather than 'Create image file from files/folder' button on the Ez-Mode Picker screen.

 

Well, it's that or you've changed the 'Data Type' option to 'Mode2/Form1/2352' when it should be on 'Mode1/2048'.

 

The first time I attempted to write the ISO, after the popup requesting an image name, I got another popup saying there was a problem with the configuration and did I want ImgBurn to correct it for me, which I said yes, perhaps it changed the mode at that time? Since your post I tried it again, did everything the same as my first time. This time however the second popup box did not appear (so maybe I did something different the first time?) and the ISO was created. I am now burning the ISO to disk and do not expect there to be any problems.

 

Thank you for your assistance, from the limited amount of time I have spent with ImgBurn, I want to compliment the developers for the thoroughness of their coding and information given back to the user.

 

I especially appreciate the attention to detail, like how the task bar icon displays the progress of the activity being performed. I just sent in a donation to support its continued development.

 

Regards,

Steven