tonyswain Posted April 9, 2011 Posted April 9, 2011 Hi i am fairly new to this so please excuse me if this is an obvious question, am using D.V.D Fab and imageburn to copy BluRay discs , can someone explain why sometimes it is slow to burn the disc and when i check the log i am getting lots of yellow exclamation marks with the message , "waiting for the buffer to recover" and "waiting for the hard disk activity to reach threshold level" this happens all the way through, is it my P.C or something i am not doing, many thanks for your time. Tony Swain.
ianymaty Posted April 9, 2011 Posted April 9, 2011 Is it what it says. Your hard drive has a lot of activity and can't feed the drive with the amount of data at the speed your drive burns the disc. Quit havy tasks on your system while burning. Also it could be related to bad/outdated/messed up drivers. Look for updating the chipset/storage drivers. This site may help http://www.ma-config.com/ A log would give us some more clues. Read the pink bar at the top.
tonyswain Posted April 9, 2011 Author Posted April 9, 2011 Is it what it says. Your hard drive has a lot of activity and can't feed the drive with the amount of data at the speed your drive burns the disc. Quit havy tasks on your system while burning. Also it could be related to bad/outdated/messed up drivers. Look for updating the chipset/storage drivers. This site may help http://www.ma-config.com/ A log would give us some more clues. Read the pink bar at the top.
tonyswain Posted April 9, 2011 Author Posted April 9, 2011 Many thanks for the quick response, will do some homework on the drivers, apologies for not including the log, Still learning!!! Tony.
Recommended Posts