scottywhu Posted April 15, 2011 Share Posted April 15, 2011 Hi, Wondered if anyone could help ? Since upgrading to Windows 7 I can no longer burn DL disks. I am using Verbatim 8x DVD+R DL My Drives are : Phillips PBDV16LSp1 ATA Device : Atapi DVD A DH16A3L SCSI Cdrom Device I have updated the drivers on my motherboard : (EVGA-122-CK-NF68) Here is the error : I/O Error Device (0:1:0)Philips PBDV16LSP1 B1.8 (E:) (ATA) Scsistatus : 0x02 Interpretation : CHeck Condition CDB : 2A 00 00 00 00 00 00 00 20 00 Interpretation : Write (10) - Sectors 0-31 Sense Area : 70 00 03 00 00 00 00 12 00 00 00 00 73 02 00 00 00 00 Interpretation : Power Calibration Area Is Full And here is the log : I 10:41:54 ImgBurn Version 2.5.5.0 started! I 10:41:54 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 10:41:54 Total Physical Memory: 2,882,088 KB - Available: 1,076,168 KB I 10:41:54 Initialising SPTI... I 10:41:54 Searching for SCSI / ATAPI devices... I 10:42:15 -> Drive 1 - Info: PHILIPS PBDV16LSP1 B1.8 (E:) (ATA) I 10:42:15 -> Drive 2 - Info: ATAPI DVD A DH16A3L 8H1F (F:) (ATA) I 10:42:15 Found 1 DVD±RW and 1 DVD±RW/RAM! I 10:42:25 Operation Started! I 10:42:25 Source File: C:\Users\Scott\Desktop\icon-mjte-x360.dvd I 10:42:25 Source File Sectors: 3,827,488 (MODE1/2048) I 10:42:25 Source File Size: 7,838,695,424 bytes I 10:42:25 Source File Volume Identifier: DVD_ROM I 10:42:25 Source File Volume Set Identifier: d0a44000MS UDFBridge I 10:42:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:42:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:42:25 Source File File System(s): ISO9660, UDF (1.50) I 10:42:25 Destination Device: [0:1:0] PHILIPS PBDV16LSP1 B1.8 (E:) (ATA) I 10:42:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) I 10:42:25 Destination Media Sectors: 4,173,824 I 10:42:25 Write Mode: DVD I 10:42:25 Write Type: DAO I 10:42:25 Write Speed: 2x I 10:42:25 Link Size: Auto I 10:42:25 Lock Volume: Yes I 10:42:25 Test Mode: No I 10:42:25 OPC: No I 10:42:25 BURN-Proof: Enabled W 10:42:25 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) I 10:42:25 Optimal L0 Data Zone Capacity: 1,913,760 I 10:42:25 Optimal L0 Data Zone Method: Copied From Original Disc I 10:42:25 Set L0 Data Zone Capacity Succeeded! I 10:42:25 Filling Buffer... (40 MB) I 10:42:26 Writing LeadIn... W 10:42:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 10:42:29 Retrying (1 of 20)... W 10:42:31 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:31 Retrying (2 of 20)... W 10:42:33 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:33 Retrying (3 of 20)... W 10:42:36 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:36 Retrying (4 of 20)... W 10:42:39 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:39 Retrying (5 of 20)... W 10:42:41 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:41 Retrying (6 of 20)... W 10:42:42 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:43 Retrying (7 of 20)... W 10:42:45 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:45 Retrying (8 of 20)... W 10:42:47 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:47 Retrying (9 of 20)... W 10:42:50 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:50 Retrying (10 of 20)... W 10:42:52 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:52 Retrying (11 of 20)... W 10:42:54 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:54 Retrying (12 of 20)... W 10:42:57 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:57 Retrying (13 of 20)... W 10:42:59 Retry Failed - Reason: Power Calibration Area Is Full W 10:42:59 Retrying (14 of 20)... W 10:43:01 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:01 Retrying (15 of 20)... W 10:43:03 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:03 Retrying (16 of 20)... W 10:43:05 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:05 Retrying (17 of 20)... W 10:43:07 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:07 Retrying (18 of 20)... W 10:43:10 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:10 Retrying (19 of 20)... W 10:43:11 Retry Failed - Reason: Power Calibration Area Is Full W 10:43:12 Retrying (20 of 20)... W 10:43:14 Retry Failed - Reason: Power Calibration Area Is Full Hopefully you can help, I am at a loss what to do next !! Many thanks Scott Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 15, 2011 Share Posted April 15, 2011 Have you burnt MKM-003-00 with that Philips drive before? Try using the LiteOn instead. MKM-003-00 is 8x media, so a drive only listing 2.4x as the supported write speed probably doesn't support the MID/dye very well (or at all). Link to comment Share on other sites More sharing options...
Recommended Posts