DomDom Posted April 15, 2011 Posted April 15, 2011 Hi All, new here but not new to forums. Been trying to take a backup of a dual layer DVD-ROM and I'm getting errors regarding the address at which layer-0 ends and layer-1 starts. I have pasted some information about the source disc below and also some bits from the logfile. Basically, when I try to commence the burn of the backup copy I get a message about having a layer break size which is not divisible by 16. This prevents me from continuing unless I manually set the layer break to the next number up which can divide by 16, in this case 2,078,448. When I try a dry run in test mode this appears to work. All good. So I continue on in committed mode and it fails as below. Found one similar topic but the manual change of the layer break value appeared to work for that. All help gratefully received. Dom SOURCE DISC INFO BENQ DVD DD DW1620 B7W9 (ATA) Current Profile: DVD-ROM Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 4,009,584 Size: 8,211,628,032 bytes Time: 891:03:09 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 4009583) -> LeadOut (LBA: 4009584) Physical Format Information (Last Recorded - L0): Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 2 Track Path: Parallel Track Path (PTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,275,050 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded - L1): Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: 10.08Mbps Number of Layers: 2 Track Path: Parallel Track Path (PTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,275,050 Last Physical Sector in Layer 0: 0 Layer Information: Layer 0 Sectors: 2,078,443 (51.84%) Layer 1 Sectors: 1,931,141 (48.16%) ERROR LOG I 14:15:18 ImgBurn Version 2.5.5.0 started! I 14:15:18 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:15:18 Total Physical Memory: 2,620,416 KB - Available: 1,866,492 KB I 14:15:18 Initialising SPTI... I 14:15:18 Searching for SCSI / ATAPI devices... I 14:15:19 -> Drive 1 - Info: BENQ DVD DD DW1620 B7W9 (F:) (ATA) I 14:15:19 -> Drive 2 - Info: JLMS DVD-ROM XJ-HD166 DD05 (E:) (ATA) I 14:15:19 Found 1 DVD-ROM and 1 DVD±RW! I 14:16:14 Operation Started! I 14:16:14 Source File: G:\JagNav\464110-8220.MDS I 14:16:14 Source File Sectors: 4,009,584 (MODE1/2048) I 14:16:14 Source File Size: 8,211,628,032 bytes I 14:16:14 Source File Volume Identifier: 464110-8220 I 14:16:14 Source File Application Identifier: Session Offset : 0 VTC Sector Offset: 0 I 14:16:14 Source File Implementation Identifier: Smart Storage, Inc. I 14:16:14 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 14:16:14 Destination Device: [1:1:0] BENQ DVD DD DW1620 B7W9 (F:) (ATA) I 14:16:14 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x) I 14:16:14 Destination Media Sectors: 4,173,824 I 14:16:14 Write Mode: DVD I 14:16:14 Write Type: DAO I 14:16:14 Write Speed: MAX I 14:16:14 Link Size: Auto I 14:16:14 Lock Volume: Yes I 14:16:14 Test Mode: No I 14:16:14 OPC: No I 14:16:14 BURN-Proof: Enabled I 14:16:14 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 14:16:14 Book Type Setting: DVD-ROM I 14:16:14 Advanced Settings - WOPC: Yes I 14:16:19 User Specified L0 Data Zone Capacity: 2,078,448 I 14:16:19 Set L0 Data Zone Capacity Succeeded! I 14:16:19 Filling Buffer... (40 MB) I 14:16:19 Writing LeadIn... I 14:16:29 Writing Session 1 of 1... (1 Track, LBA: 0 - 4009583) I 14:16:29 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4009583) I 14:16:29 Writing Layer 0... (LBA: 0 - 2078447) I 14:38:13 Writing Layer 1... (LBA: 2078448 - 4009583) W 14:38:36 Failed to Write Sectors 2078768 - 2078799 - Reason: Write Error W 14:38:36 Retrying (1 of 20)... W 14:38:36 Retry Failed - Reason: Invalid Address For Write ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ W 14:38:36 Retry Failed - Reason: Invalid Address For Write W 14:38:36 Retrying (20 of 20)... W 14:38:36 Retry Failed - Reason: Invalid Address For Write E 14:38:51 Failed to Write Sectors 2078768 - 2078799 - Reason: Write Error E 14:38:51 Next Writable Address: 0 I 14:38:51 Synchronising Cache... W 14:38:56 User opted to skip the 'Close Track/Session/Disc' functions. E 14:38:56 Failed to Write Image! I 14:38:56 Exporting Graph Data... I 14:38:56 Graph Data File: C:\Documents and Settings\Dom\Application Data\ImgBurn\Graph Data Files\BENQ_DVD_DD_DW1620_B7W9_15-APRIL-2011_14-16_RICOHJPN-D01-67_MAX.ibg I 14:38:56 Export Successfully Completed! E 14:38:56 Operation Failed! - Duration: 00:22:42 I 14:38:56 Average Write Rate: 3,098 KB/s (2.2x) - Maximum Write Rate: 3,387 KB/s (2.4x)
LIGHTNING UK! Posted April 15, 2011 Posted April 15, 2011 Layer Information:Layer 0 Sectors: 2,078,443 (51.84%) Layer 1 Sectors: 1,931,141 (48.16%) Does the DVDROM say the same for that disc? Your BenQ writer is old now and the only media they really supported was the original Verbatim 2.4x stuff using the MKM-001-00 dye. At the moment you're just suffering from this... http://forum.imgburn.com/index.php?showtopic=8000
DomDom Posted April 15, 2011 Author Posted April 15, 2011 Layer Information:Layer 0 Sectors: 2,078,443 (51.84%) Layer 1 Sectors: 1,931,141 (48.16%) Does the DVDROM say the same for that disc? Your BenQ writer is old now and the only media they really supported was the original Verbatim 2.4x stuff using the MKM-001-00 dye. At the moment you're just suffering from this... http://forum.imgburn.com/index.php?showtopic=8000 Cool, thanks for the rapid reply. So reading the text at the link it seems that the blank media I'm using is cheap & nasty, nothing more serious than that. I also looked for updated firmware for that drive but as you say, it's been around a while. Maybe just go buy a new one. I have kept that particular drive for burning audio CD's since it's so good for that. But I do use either THATS or TAIYO YUDEN media for audio whereas these blanks DVD's were all that was on the shelf at the time, probably the biggest profit margin for the retailer. Thanks again and cool software BTW.
Recommended Posts