Verification 0 Kb/s?

[renans]

I'm brand new to this, but I have followed guides and tried my best to do all the research I possibly could before posting.

 

I am trying to burn an iso to a DVD+R DL Verbatim disk and it began working perfectly fine, it stopped at 13% and was at 0 Kb/s so I just left it on hoping that something was going to change and so I come back 2 hours later and still at 13%, I don't know what I was doing but it ended burning again?

It now stopped at 30% and is again currently at 0 Kb/s

 

Here is the log:

 

 

I 19:17:04 ImgBurn Version 2.5.5.0 started!

I 19:17:04 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 19:17:04 Total Physical Memory: 2,880,612 KB - Available: 1,707,736 KB

I 19:17:04 Initialising SPTI...

I 19:17:04 Searching for SCSI / ATAPI devices...

I 19:17:04 -> Drive 1 - Info: MATSHITA DVD-RAM UJ880ES 1.90 (E:) (ATA)

I 19:17:04 Found 1 DVD±RW/RAM!

I 19:18:35 Operation Started!

I 19:18:35 Source File: C:\Users\Renan Soares\Documents\Portal 2\mvl-p2p2.dvd

I 19:18:35 Source File Sectors: 3,827,488 (MODE1/2048)

I 19:18:35 Source File Size: 7,838,695,424 bytes

I 19:18:35 Source File Volume Identifier: DVD_ROM

I 19:18:35 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 19:18:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:18:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:18:35 Source File File System(s): ISO9660, UDF (1.50)

I 19:18:35 Destination Device: [2:0:0] MATSHITA DVD-RAM UJ880ES 1.90 (E:) (ATA)

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

I 19:18:35 Destination Media Sectors: 4,173,824

I 19:18:35 Write Mode: DVD

I 19:18:35 Write Type: DAO

I 19:18:35 Write Speed: 2x

I 19:18:35 Link Size: Auto

I 19:18:35 Lock Volume: Yes

I 19:18:35 Test Mode: No

I 19:18:35 OPC: No

I 19:18:35 BURN-Proof: Enabled

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 19:18:35 Optimal L0 Data Zone Capacity: 1,913,760

I 19:18:35 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:18:56 Set L0 Data Zone Capacity Succeeded!

I 19:18:57 Filling Buffer... (40 MB)

I 19:18:58 Writing LeadIn...

I 19:18:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 19:18:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 19:18:59 Writing Layer 0... (LBA: 0 - 1913759)

 

 

I don't know what any of this means.. If anyone has a clue how to make it continue burning please help me out, if I'm missing out any information just let me know thanks !

[renans]

Does anyone reply on these forums?

[Rincewind]

See if there are any firmware updates to your burner. To do that you must be in amy other mode except EZ-Mode Picker. Go to tools -> Drive -> Check for firmware updates.

 

Also:

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

 

Since only 2.4x was supported, 2.4x was used. DL discs cannot support burn speeds lower than 2.4x anyways, nor SL discs for that matter I think.

 

Anyways, if there are no updates available for your burner try cleaning your burner with a cleaning disc, and try again. Just remember to set the AWS to the proper speed of your discs, in this case 2.4x.

 

-edit

 

You seem to have cut off the log? Please include the ENTIRE log.

Edited April 23, 2011 by Rincewind

[mmalves]

You should enable Windows Update (look in Control Panel) so that your OS is updated to the latest version. After doing that, and possibly rebooting a few times, look for the latest drivers for your chipset/storage controllers (this website might help).

[renans]

See if there are any firmware updates to your burner. To do that you must be in amy other mode except EZ-Mode Picker. Go to tools -> Drive -> Check for firmware updates.

 

Also:

I 19:18:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x)

W 19:18:35 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

 

Since only 2.4x was supported, 2.4x was used. DL discs cannot support burn speeds lower than 2.4x anyways, nor SL discs for that matter I think.

 

Anyways, if there are no updates available for your burner try cleaning your burner with a cleaning disc, and try again. Just remember to set the AWS to the proper speed of your discs, in this case 2.4x.

 

-edit

 

You seem to have cut off the log? Please include the ENTIRE log.

 

Well the burn is STILL up, I didn't cut the log, it simply stopped right there.. Is there ANY way I can continue the burn?

Or do I just have to throw the disk away?

[renans]

And also, all the drivers are up to date and so is my imgburn so it can't be that..

[Cynthia]

I 19:17:04 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

My link

[renans]

No helpful information yet -.-

[Cynthia]

No helpful information yet -.-

I'm gone.

[Rincewind]

No helpful information yet -.-

 

Really!? Its service pack 2 for Vista, might be a good idea to install it. It might actually solve your problem.