adca14 Posted May 4, 2011 Share Posted May 4, 2011 Hi, I tried to burn today a dual layer bluray. It started off good, but about minute into the burn I get an error and an expensive coaster . The media is verbatim which never has given me a problem though this is the first time I've tried to burn a dual layer bluray. My drive is a matshita uj-225s. heres the log file: ; //****************************************\\ ; ImgBurn Version 2.5.5.0 - Log ; Tuesday, 03 May 2011, 19:08:17 ; \\****************************************// ; ; I 19:06:05 ImgBurn Version 2.5.5.0 started! I 19:06:05 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 19:06:05 Total Physical Memory: 3,144,120 KB - Available: 1,868,332 KB W 19:06:05 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 19:06:05 Initialising SPTI... I 19:06:05 Searching for SCSI / ATAPI devices... I 19:06:05 -> Drive 1 - Info: MATSHITA BD-MLT UJ-225S Q110 (D:) (ATA) I 19:06:05 -> Drive 2 - Info: JERYN 9M341EBS 1.03 (F:) (SCSI) I 19:06:05 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 19:06:43 Operation Started! I 19:06:44 Source File: C:\Users\Adonis\Downloads\TRON_LEGACY_3D.iso I 19:06:44 Source File Sectors: 24,405,120 (MODE1/2048) I 19:06:44 Source File Size: 49,981,685,760 bytes I 19:06:44 Source File Volume Identifier: TRON_LEGACY_3D I 19:06:44 Source File Volume Set Identifier: 8CD8791FEF0AC647_VOLUME_SET_ID I 19:06:44 Source File Application Identifier: APPLICATION_ID I 19:06:44 Source File Implementation Identifier: IMPLEMENTATION_ID I 19:06:44 Source File File System(s): UDF (2.50) I 19:06:44 Destination Device: [0:0:0] MATSHITA BD-MLT UJ-225S Q110 (D:) (ATA) I 19:06:44 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 1x) I 19:06:44 Destination Media Sectors: 24,438,784 I 19:06:44 Write Mode: BD I 19:06:44 Write Type: DAO I 19:06:44 Write Speed: 1x I 19:06:44 BD-R Verify Not Required: Yes I 19:06:44 Link Size: Auto I 19:06:44 Lock Volume: Yes I 19:06:44 Test Mode: No I 19:06:44 OPC: No I 19:06:44 BURN-Proof: Enabled I 19:06:44 Write Speed Successfully Set! - Effective: 4,496 KB/s (1x) I 19:06:46 Filling Buffer... (40 MB) I 19:06:47 Writing LeadIn... W 19:07:02 Failed to Write Sectors 3264 - 3295 - Reason: Power Calibration Area Error W 19:07:02 Retrying (1 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (2 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (3 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (4 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (5 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (6 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (7 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (8 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (9 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (10 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (11 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (12 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (13 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (14 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (15 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (16 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (17 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (18 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (19 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (20 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:10 Retrying (21)... W 19:07:10 Retry Failed - Reason: Unable to Recover TOC E 19:07:11 Failed to Write Sectors 3264 - 3295 - Reason: Power Calibration Area Error I 19:07:12 Synchronising Cache... W 19:07:18 User opted to skip the 'Close Track/Session/Disc' functions. E 19:07:18 Failed to Write Image! E 19:07:18 Operation Failed! - Duration: 00:00:34 I 19:07:18 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 19:08:17 Close Request Acknowledged I 19:08:17 Closing Down... I 19:08:17 Shutting down SPTI... I 19:08:17 ImgBurn closed! ; ; Link to comment Share on other sites More sharing options...
ianymaty Posted May 4, 2011 Share Posted May 4, 2011 Try again after installing the latest firmware for your drive. http://www.firmwarehq.com/Matshita/UJ-225S/files.html Link to comment Share on other sites More sharing options...
adca14 Posted May 4, 2011 Author Share Posted May 4, 2011 I'll try to update the firmware, the only problem is I have to crossflash that firmware with my specific version of the uj-225s burner. The only problem is that I'm pretty lost with how to do it #39;( trying to use the instructions on this forum My link. I'm a med student so I know absolutely nothing about computer programming at all. Link to comment Share on other sites More sharing options...
Recommended Posts