adca14 Posted May 4, 2011 Posted May 4, 2011 Hi, I tried to burn today a dual layer bluray. It started off good, but about minute into the burn I get an error and an expensive coaster . The media is verbatim which never has given me a problem though this is the first time I've tried to burn a dual layer bluray. My drive is a matshita uj-225s. heres the log file: ; //****************************************\\ ; ImgBurn Version 2.5.5.0 - Log ; Tuesday, 03 May 2011, 19:08:17 ; \\****************************************// ; ; I 19:06:05 ImgBurn Version 2.5.5.0 started! I 19:06:05 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 19:06:05 Total Physical Memory: 3,144,120 KB - Available: 1,868,332 KB W 19:06:05 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 19:06:05 Initialising SPTI... I 19:06:05 Searching for SCSI / ATAPI devices... I 19:06:05 -> Drive 1 - Info: MATSHITA BD-MLT UJ-225S Q110 (D:) (ATA) I 19:06:05 -> Drive 2 - Info: JERYN 9M341EBS 1.03 (F:) (SCSI) I 19:06:05 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 19:06:43 Operation Started! I 19:06:44 Source File: C:\Users\Adonis\Downloads\TRON_LEGACY_3D.iso I 19:06:44 Source File Sectors: 24,405,120 (MODE1/2048) I 19:06:44 Source File Size: 49,981,685,760 bytes I 19:06:44 Source File Volume Identifier: TRON_LEGACY_3D I 19:06:44 Source File Volume Set Identifier: 8CD8791FEF0AC647_VOLUME_SET_ID I 19:06:44 Source File Application Identifier: APPLICATION_ID I 19:06:44 Source File Implementation Identifier: IMPLEMENTATION_ID I 19:06:44 Source File File System(s): UDF (2.50) I 19:06:44 Destination Device: [0:0:0] MATSHITA BD-MLT UJ-225S Q110 (D:) (ATA) I 19:06:44 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) (Speeds: 1x) I 19:06:44 Destination Media Sectors: 24,438,784 I 19:06:44 Write Mode: BD I 19:06:44 Write Type: DAO I 19:06:44 Write Speed: 1x I 19:06:44 BD-R Verify Not Required: Yes I 19:06:44 Link Size: Auto I 19:06:44 Lock Volume: Yes I 19:06:44 Test Mode: No I 19:06:44 OPC: No I 19:06:44 BURN-Proof: Enabled I 19:06:44 Write Speed Successfully Set! - Effective: 4,496 KB/s (1x) I 19:06:46 Filling Buffer... (40 MB) I 19:06:47 Writing LeadIn... W 19:07:02 Failed to Write Sectors 3264 - 3295 - Reason: Power Calibration Area Error W 19:07:02 Retrying (1 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (2 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (3 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (4 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (5 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (6 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (7 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (8 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (9 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (10 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (11 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (12 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (13 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (14 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (15 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (16 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (17 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (18 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (19 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:02 Retrying (20 of 20)... W 19:07:02 Retry Failed - Reason: Unable to Recover TOC W 19:07:10 Retrying (21)... W 19:07:10 Retry Failed - Reason: Unable to Recover TOC E 19:07:11 Failed to Write Sectors 3264 - 3295 - Reason: Power Calibration Area Error I 19:07:12 Synchronising Cache... W 19:07:18 User opted to skip the 'Close Track/Session/Disc' functions. E 19:07:18 Failed to Write Image! E 19:07:18 Operation Failed! - Duration: 00:00:34 I 19:07:18 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 19:08:17 Close Request Acknowledged I 19:08:17 Closing Down... I 19:08:17 Shutting down SPTI... I 19:08:17 ImgBurn closed! ; ;
ianymaty Posted May 4, 2011 Posted May 4, 2011 Try again after installing the latest firmware for your drive. http://www.firmwarehq.com/Matshita/UJ-225S/files.html
adca14 Posted May 4, 2011 Author Posted May 4, 2011 I'll try to update the firmware, the only problem is I have to crossflash that firmware with my specific version of the uj-225s burner. The only problem is that I'm pretty lost with how to do it #39;( trying to use the instructions on this forum My link. I'm a med student so I know absolutely nothing about computer programming at all.
Recommended Posts