Jump to content

Where to find FW update?


tvride
 Share

Recommended Posts

I purchased this PC from Hewlet Packard and it came with a BD writer from them. It is listed as follows: hp BD-RE BH30L B633 (ATAPI) (BD-ROM Recorder).

I have tried many sites to find a Firmware Update, to no avail. Even the HP support website has nothing. Could you please point me in the right direction?

 

 

; //****************************************\\

; ImgBurn Version 2.5.5.0 - Log

; Thursday, 05 May 2011, 12:54:52

; \\****************************************//

;

;

I 12:01:31 ImgBurn Version 2.5.5.0 started!

I 12:01:31 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 12:01:31 Total Physical Memory: 16,768,096 KB - Available: 13,119,260 KB

I 12:01:31 Initialising SPTI...

I 12:01:31 Searching for SCSI / ATAPI devices...

I 12:01:31 -> Drive 1 - Info: hp BD-RE BH30L B633 (F:) (ATAPI)

I 12:01:31 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (M:) (SCSI)

I 12:01:31 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE!

W 12:01:46 User accepted disc space warning and is attempting to underburn!

I 12:01:46 Operation Started!

I 12:01:46 Source File: E:\Health\KILLER_AT_LARGE - Obesity 2008 .iso

I 12:01:46 Source File Sectors: 2,289,775 (MODE1/2048)

I 12:01:46 Source File Size: 4,689,459,200 bytes

I 12:01:46 Source File Volume Identifier: KILLER_AT_LARGE

I 12:01:46 Source File Volume Set Identifier: 4DA75CDB________KILLER_AT_LARGE

I 12:01:46 Source File Application Identifier: ELBY CLONEDVD

I 12:01:46 Source File Implementation Identifier: ELABORATE BYTES

I 12:01:46 Source File File System(s): ISO9660, UDF (1.02)

I 12:01:47 Destination Device: [0:2:0] hp BD-RE BH30L B633 (F:) (ATAPI)

I 12:01:47 Destination Media Type: DVD-R DL (Disc ID: RITEKP01) (Speeds: 2x, 4x)

I 12:01:47 Destination Media Sectors: 4,172,816

I 12:01:47 Write Mode: DVD

I 12:01:47 Write Type: DAO

I 12:01:47 Write Speed: 4x

I 12:01:47 Link Size: Auto

I 12:01:47 Lock Volume: Yes

I 12:01:47 Test Mode: No

I 12:01:47 OPC: No

I 12:01:47 BURN-Proof: Enabled

I 12:01:47 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

W 12:01:48 Optimal L1 Data Zone Start LBA: None Found! (VTS_15)

I 12:01:48 Optimal L0 Data Zone Capacity: 2,092,896

I 12:01:48 Optimal L0 Data Zone Method: Fixed LBA

I 12:01:48 Filling Buffer... (40 MB)

I 12:01:49 Writing LeadIn...

I 12:02:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 2289774)

I 12:02:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2289774)

I 12:02:21 Writing Layer 0... (LBA: 0 - 2092895)

I 12:15:27 Writing Layer 1... (LBA: 2092896 - 2289774)

I 12:16:54 Synchronising Cache...

I 12:29:14 Exporting Graph Data...

I 12:29:15 Graph Data File: C:\Users\Terry\AppData\Roaming\ImgBurn\Graph Data Files\hp_BD-RE_BH30L_B633_THURSDAY-MAY-05-2011_12-01_PM_RITEKP01_4x.ibg

I 12:29:15 Export Successfully Completed!

I 12:29:15 Operation Successfully Completed! - Duration: 00:27:28

I 12:29:15 Average Write Rate: 5,245 KB/s (3.8x) - Maximum Write Rate: 5,590 KB/s (4.0x)

I 12:29:15 Cycling Tray before Verify...

W 12:29:24 Waiting for device to become ready...

I 12:29:38 Device Ready!

I 12:29:40 Operation Started!

I 12:29:40 Source Device: [0:2:0] hp BD-RE BH30L B633 (F:) (ATAPI)

I 12:29:40 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: RITEKP01) (Speeds: 2x, 4x)

I 12:29:40 Image File: E:\Health\KILLER_AT_LARGE - Obesity 2008 .iso

I 12:29:40 Image File Sectors: 2,289,775 (MODE1/2048)

I 12:29:40 Image File Size: 4,689,459,200 bytes

I 12:29:40 Image File Volume Identifier: KILLER_AT_LARGE

I 12:29:40 Image File Volume Set Identifier: 4DA75CDB________KILLER_AT_LARGE

I 12:29:40 Image File Application Identifier: ELBY CLONEDVD

I 12:29:40 Image File Implementation Identifier: ELABORATE BYTES

I 12:29:40 Image File File System(s): ISO9660, UDF (1.02)

I 12:29:40 Read Speed (Data/Audio): MAX / MAX

I 12:29:40 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2289774)

I 12:29:40 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2289774)

I 12:29:40 Verifying Layer 0... (LBA: 0 - 2092895)

I 12:38:34 Verifying Layer 1... (LBA: 2092896 - 2289774)

I 12:39:10 Exporting Graph Data...

I 12:39:10 Graph Data File: C:\Users\Terry\AppData\Roaming\ImgBurn\Graph Data Files\hp_BD-RE_BH30L_B633_THURSDAY-MAY-05-2011_12-01_PM_RITEKP01_4x.ibg

I 12:39:10 Export Successfully Completed!

I 12:39:10 Operation Successfully Completed! - Duration: 00:09:30

I 12:39:10 Average Verify Rate: 8,048 KB/s (5.8x) - Maximum Verify Rate: 11,456 KB/s (8.3x)

I 12:54:52 Close Request Acknowledged

I 12:54:52 Closing Down...

I 12:54:52 Shutting down SPTI...

I 12:54:52 ImgBurn closed!

Link to comment
Share on other sites

Your burner might be new so that is why there is no firmware update yet. firmwarehq.com is usually the best place to look, but I also found no such drive listed.

 

According to the log, your burn succeeded and verified fine. Are you simply having playback issues in your player?

 

W 12:01:48 Optimal L1 Data Zone Start LBA: None Found! (VTS_15)

I 12:01:47 Destination Media Type: DVD-R DL (Disc ID: RITEKP01) (Speeds: 2x, 4x)

 

If you are wondering why you are getting this warning, it is because you are using a -R DL. Although it burned successfully, the layerbreak position was not set, and it cannot be set with -R DL discs anyways. L0 must be filled up completely, and so you will not get an optimal position in your movie.

 

For better results use +R DL discs instead, and go for the Verbatim +R DL discs. Layer breaks with +R DL can be arbitrarily set, no need to fill up L0 (first layer) completely. Those discs have the Disc ID beginning with MKM. Also +R DLs tend to have better compatibility with DVD players rather than -R DLs.

Edited by Rincewind
Link to comment
Share on other sites

Yep, I am aware that the image will easily fit onto a single layer disk. I simply want to use up these DVD-R DL disks and get them out of my way, without throwing them in the trash.

 

The reason I am lookimng to find a firmware update is for the sole purpose of media compatibility.

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.