podunga Posted May 11, 2011 Share Posted May 11, 2011 help with this error ! Please I was burn a iso in a dvd and this error appeared: I 20:32:01 ImgBurn Version 2.5.4.0 started! I 20:32:01 Microsoft Windows 7 Home Basic Edition (6.1, Build 7601 : Service Pack 1) I 20:32:01 Total Physical Memory: 3.145.000 KB - Available: 1.984.620 KB I 20:32:01 Initialising SPTI... I 20:32:01 Searching for SCSI / ATAPI devices... I 20:32:01 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS50 TN01 (D:) (ATA) I 20:32:01 Found 1 DVD±RW/RAM! I 20:34:22 Operation Started! I 20:34:22 Source File: C:\Users\Thiago\Desktop\gh.dvd I 20:34:22 Source File Sectors: 3.827.488 (MODE1/2048) I 20:34:22 Source File Size: 7.838.695.424 bytes I 20:34:22 Source File Volume Identifier: XGD2DVD_NTSC I 20:34:22 Source File Volume Set Identifier: 34672923 I 20:34:22 Source File Implementation Identifier: Sonic Scenarist 3.1 I 20:34:22 Source File File System(s): ISO9660; UDF (1.02) I 20:34:22 Destination Device: [2:1:0] HL-DT-ST DVDRAM GH22NS50 TN01 (D:) (ATA) I 20:34:22 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 2,4x; 4x; 6x; 8x) I 20:34:22 Destination Media Sectors: 4.173.824 I 20:34:22 Write Mode: DVD I 20:34:22 Write Type: DAO I 20:34:22 Write Speed: 2,4x I 20:34:22 Link Size: Auto I 20:34:22 Lock Volume: Yes I 20:34:22 Test Mode: No I 20:34:22 OPC: No I 20:34:22 BURN-Proof: Enabled I 20:34:22 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 20:34:22 Book Type Setting: DVD-ROM I 20:34:22 Optimal L0 Data Zone Capacity: 1.913.760 I 20:34:22 Optimal L0 Data Zone Method: Copied From Original Disc I 20:36:00 Set L0 Data Zone Capacity Succeeded! I 20:36:00 Filling Buffer... (40 MB) I 20:36:01 Writing LeadIn... I 20:36:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 20:36:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 20:36:03 Writing Layer 0... (LBA: 0 - 1913759) W 20:48:43 Failed to Write Sectors 1222304 - 1222335 - Reason: Spindle Servo Failure W 20:48:43 Retrying (1 of 20)... W 20:48:43 Retry Failed - Reason: Spindle Servo Failure W 20:48:43 Retrying (2 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (3 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (4 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (5 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (6 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (7 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (8 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (9 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (10 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (11 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (12 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (13 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (14 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (15 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (16 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (17 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (18 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (19 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:48:43 Retrying (20 of 20)... W 20:48:43 Retry Failed - Reason: Invalid Address For Write W 20:49:10 Retrying (21)... W 20:49:10 Retry Failed - Reason: Invalid Address For Write W 20:49:11 Retrying (22)... W 20:49:11 Retry Failed - Reason: Invalid Address For Write W 20:49:11 Retrying (23)... W 20:49:11 Retry Failed - Reason: Invalid Address For Write W 20:49:12 Retrying (24)... W 20:49:12 Retry Failed - Reason: Invalid Address For Write W 20:49:12 Retrying (25)... W 20:49:12 Retry Failed - Reason: Invalid Address For Write W 20:49:12 Retrying (26)... W 20:49:12 Retry Failed - Reason: Invalid Address For Write W 20:49:12 Retrying (27)... W 20:49:12 Retry Failed - Reason: Invalid Address For Write W 20:49:13 Retrying (28)... W 20:49:13 Retry Failed - Reason: Invalid Address For Write W 20:49:13 Retrying (29)... W 20:49:13 Retry Failed - Reason: Invalid Address For Write W 20:49:13 Retrying (30)... W 20:49:13 Retry Failed - Reason: Invalid Address For Write W 20:49:13 Retrying (31)... W 20:49:13 Retry Failed - Reason: Invalid Address For Write W 20:49:13 Retrying (32)... W 20:49:13 Retry Failed - Reason: Invalid Address For Write W 20:49:14 Retrying (33)... W 20:49:14 Retry Failed - Reason: Invalid Address For Write W 20:49:14 Retrying (34)... W 20:49:14 Retry Failed - Reason: Invalid Address For Write E 20:49:14 Failed to Write Sectors 1222304 - 1222335 - Reason: Spindle Servo Failure E 20:49:14 Next Writable Address: 1221792 I 20:49:14 Synchronising Cache... I 20:49:20 Closing Track... I 20:49:26 Finalising Disc... Link to comment Share on other sites More sharing options...
Rincewind Posted May 12, 2011 Share Posted May 12, 2011 (edited) Update imgburn to 2.5.5 Also see: http://forum.imgburn.com/index.php?showtopic=8000 -edit I 20:32:01 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS50 TN01 (D:) (ATA) There is a firmware update for your burner available. http://www.firmwarehq.com/download_1717-file_GH22NS50_TN03(ew).zip.html Edited May 12, 2011 by Rincewind Link to comment Share on other sites More sharing options...
Recommended Posts