the_bishop Posted May 16, 2011 Posted May 16, 2011 Hi! First off, thanks for this forum!! After a successful burn, the dvd will not stop spinning and will spin forever if it is not ejected. After I eject the dvd and reload, the dvd is empty. I am baffled. Below is a burn log: ; //****************************************\\ ; ImgBurn Version 2.5.5.0 - Log ; Sunday, 15 May 2011, 17:59:15 ; \\****************************************// ; ; I 16:51:33 ImgBurn Version 2.5.5.0 started! I 16:51:33 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:51:33 Total Physical Memory: 2,030,060 KB - Available: 1,395,904 KB W 16:51:33 Drive H:\ (FAT32) does not support single files > 4 GB in size. I 16:51:33 Initialising SPTI... I 16:51:33 Searching for SCSI / ATAPI devices... I 16:51:33 -> Drive 1 - Info: TSSTcorp CD/DVDW TS-H552L 0614 (I:) (ATA) I 16:51:33 Found 1 DVD±RW! I 16:52:48 Operation Started! I 16:52:48 Building Image Tree... I 16:53:06 Checking Directory Depth... I 16:53:06 Calculating Totals... I 16:53:06 Preparing Image... I 16:53:06 Checking Path Length... I 16:53:06 Contents: 2 Files, 0 Folders I 16:53:06 Content Type: Data I 16:53:06 Data Type: MODE1/2048 I 16:53:06 File System(s): ISO9660, UDF (1.02) I 16:53:06 Volume Label: Desktop I 16:53:06 Size: 2,086,247,010 bytes I 16:53:06 Sectors: 1,018,676 I 16:53:06 Image Size: 2,086,797,312 bytes I 16:53:06 Image Sectors: 1,018,944 I 16:53:08 Operation Successfully Completed! - Duration: 00:00:19 I 16:53:08 Operation Started! I 16:53:08 Source File: -==/\/[bUILD IMAGE]\/\==- I 16:53:08 Source File Sectors: 1,018,944 (MODE1/2048) I 16:53:08 Source File Size: 2,086,797,312 bytes I 16:53:08 Source File Volume Identifier: Desktop I 16:53:08 Source File Volume Set Identifier: 3EAF8698000F8C3E I 16:53:08 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER! I 16:53:08 Source File Implementation Identifier: ImgBurn I 16:53:08 Source File File System(s): ISO9660, UDF (1.02) I 16:53:08 Destination Device: [5:0:0] TSSTcorp CD/DVDW TS-H552L 0614 (I:) (ATA) I 16:53:08 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 4x, 8x, 12x, 16x) I 16:53:08 Destination Media Sectors: 2,297,888 I 16:53:08 Write Mode: DVD I 16:53:08 Write Type: Incremental I 16:53:08 Write Speed: 4x I 16:53:08 Link Size: Auto I 16:53:08 Lock Volume: Yes I 16:53:08 Test Mode: No I 16:53:08 OPC: No I 16:53:08 BURN-Proof: Enabled I 16:53:08 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 16:53:08 Filling Buffer... (40 MB) I 16:53:09 Writing LeadIn... I 16:53:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 1018943) I 16:53:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1018943) I 17:20:01 Synchronising Cache... I 17:20:06 Closing Track... I 17:20:07 Closing Session... I 17:20:33 Exporting Graph Data... I 17:20:33 Graph Data File: C:\Documents and Settings\User\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-H552L_0614_SUNDAY-MAY-15-2011_4-53_PM_TYG03_4x.ibg I 17:20:33 Export Successfully Completed! I 17:20:33 Operation Successfully Completed! - Duration: 00:27:25 I 17:20:33 Average Write Rate: 1,279 KB/s (0.9x) - Maximum Write Rate: 2,084 KB/s (1.5x) I 17:52:53 Close Request Acknowledged I 17:52:53 Closing Down... I 17:59:15 Shutting down SPTI... I 17:59:15 ImgBurn closed!
Rincewind Posted May 16, 2011 Posted May 16, 2011 (edited) I 16:53:08 Write Type: Incremental Any reason why you are using incremental? That could be the cause. Go to tools -> settings, write tab, and on page one select DAO/SAO instead of incremental. Afterwards try again. Edited May 16, 2011 by Rincewind
Cynthia Posted May 16, 2011 Posted May 16, 2011 I 17:20:33 Average Write Rate: 1,279 KB/s (0.9x) - Maximum Write Rate: 2,084 KB/s (1.5x) You selected 4x. Either the discs are some no names ones (crappy) or you are in PIO mode with that burner.
the_bishop Posted May 16, 2011 Author Posted May 16, 2011 I 16:53:08 Write Type: Incremental Any reason why you are using incremental? That could be the cause. Go to tools -> settings, write tab, and on page one select DAO/SAO instead of incremental. Afterwards try again. Thank you Rincewind. I was originally burning with DAO/SAO (with the same problem, spinning) then switched to incremental as was suggested on another thread.
the_bishop Posted May 16, 2011 Author Posted May 16, 2011 I 17:20:33 Average Write Rate: 1,279 KB/s (0.9x) - Maximum Write Rate: 2,084 KB/s (1.5x) You selected 4x. Either the discs are some no names ones (crappy) or you are in PIO mode with that burner. Thank you Cynthia. I am burning with Taiyo Yuden (JVC). I read that they were one of the best Dvd-R.
the_bishop Posted May 16, 2011 Author Posted May 16, 2011 UPDATE: I loaded the burned dvd into my gf's laptop and the files WERE on the dvd. Why do you think my dvd burner will not read the dvds? It shows the burned DVDs as blank still.
LIGHTNING UK! Posted May 16, 2011 Posted May 16, 2011 I 17:20:33 Average Write Rate: 1,279 KB/s (0.9x) - Maximum Write Rate: 2,084 KB/s (1.5x) You selected 4x. Either the discs are some no names ones (crappy) or you are in PIO mode with that burner. Thank you Cynthia. I am burning with Taiyo Yuden (JVC). I read that they were one of the best Dvd-R. I'm not sure the JVC ones are as good as the original Taiyo Yuden ones but they should still be fine. As such, you have DMA issues. Follow the post in the FAQ that tells you how to fix them.
Recommended Posts