wasp748 Posted May 21, 2011 Share Posted May 21, 2011 i have 2 dvd roms & i use them to burn XBOX games at the same time, when i use both of them the write speed drops to 1.5X but when i use 1 of them without the other i get the maximum speed, any idea for how to fix it, i've tried dma stuff and used a fresh copy of windows XP and no use also i used to burn with both of them and they booth worked fine???? Link to comment Share on other sites More sharing options...
wasp748 Posted May 21, 2011 Author Share Posted May 21, 2011 18:17:31 ImgBurn Version 2.5.5.0 started! I 18:17:31 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 18:17:31 Total Physical Memory: 2,028,716 KB - Available: 1,705,236 KB E 18:17:31 Failed to check for ImgBurn update! I 18:17:31 Initialising SPTI... I 18:17:31 Searching for SCSI / ATAPI devices... E 18:17:31 Device->Initialise() Failed! E 18:17:31 Device: [1:0:0] ASUS DRW-24B1ST 1.01 (F:) (ATA) E 18:17:31 This drive is currently locked for exclusive access by 'ImgBurn v2.5.5.0 - PID: 344'. E 18:17:31 Device->Initialise() Failed! E 18:17:31 Device: [1:0:0] ASUS DRW-24B1ST 1.01 (F:) (ATA) E 18:17:31 This drive will not be visible in the program. I 18:17:32 -> Drive 1 - Info: ASUS DRW-24B1ST 1.01 (G:) (ATA) I 18:17:32 Found 1 DVD±RW/RAM! I 18:17:52 Operation Started! I 18:17:52 Source File: D:\kinect games\Kinectimals\kix360\kix360.dvd I 18:17:52 Source File Sectors: 3,827,488 (MODE1/2048) I 18:17:52 Source File Size: 7,838,695,424 bytes I 18:17:52 Source File Volume Identifier: DVD_ROM I 18:17:52 Source File Volume Set Identifier: 1b018000MS UDFBridge I 18:17:52 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:17:52 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:17:52 Source File File System(s): ISO9660, UDF (1.50) I 18:17:52 Destination Device: [1:1:0] ASUS DRW-24B1ST 1.01 (G:) (ATA) I 18:17:52 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00) (Speeds: 4x, 6x, 8x) I 18:17:52 Destination Media Sectors: 4,173,824 I 18:17:52 Write Mode: DVD I 18:17:52 Write Type: DAO I 18:17:52 Write Speed: 4x I 18:17:52 Link Size: Auto I 18:17:52 Lock Volume: Yes I 18:17:52 Test Mode: No I 18:17:52 OPC: No Link to comment Share on other sites More sharing options...
Cynthia Posted May 21, 2011 Share Posted May 21, 2011 I 18:17:52 Source File: D:\kinect games\Kinectimals\kix360\kix360.dvd Best is to use the source from two different hard disk when you burn to two burners at the same time. Link to comment Share on other sites More sharing options...
wasp748 Posted May 22, 2011 Author Share Posted May 22, 2011 i've tried this trick and no use please help????? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 22, 2011 Share Posted May 22, 2011 2 physically different hdds to 2 different burners should not a be a problem. Please post the burn logs from both burns you've attempted under those conditions. I assume you aren't using adapters on any of the drives? (IDE/USB -> SATA etc) When burning at full speed with just 1 drive, can I assume you've tried that with both of the drives? So either of them will burn at full speed when the other isn't also burning. If only 1 of them works at full speed then obviously the issue is with the other one Link to comment Share on other sites More sharing options...
Recommended Posts