MattH Posted June 17, 2011 Share Posted June 17, 2011 Is there a command to prevent Confirm Volume Label dialog window from opening? My batch file: CopySW_F.bat ----- @echo off C: CD\ CD Program Files CD ImgBurn echo Copying disc in drive F to file %1 ImgBurn.exe /MODE BUILD /OUTPUTMODE IMAGEFILE /SRC F: /DEST %1 /START /EJECT YES ----- Want I want: command "CopySW_F.bat C:\CD.bin" To create CD image CD.bin without any input needed in ImgBurn When I run this the Confirm Volume Label pops up with a 30 second delay until my system will start copying my CD. Thanks in advance for any feedback I can get on how this should be configured. Matt Link to comment Share on other sites More sharing options...
MattH Posted June 17, 2011 Author Share Posted June 17, 2011 (edited) I found the info I needed in ImgBurn.exe /? This works the way I want it: ImgBurn.exe /MODE BUILD /OUTPUTMODE IMAGEFILE /SRC F: /DEST %1 /START /VOLUMELABEL SOFTWARE /EJECT YES /NOIMAGEDETAILS /CLOSESUCCESS One minor issue disc drive doesn't eject even if /EJECT YES is set. Edited June 17, 2011 by MattH Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 17, 2011 Share Posted June 17, 2011 The real info you need is in the ReadMe.txt file. Why are you using Build mode to copy a disc? Use Read mode. /EJECT ejects the device you're reading from or writing to. You're outputting to an image file so there's no 'device' being used. (The 'source' is not a device) Link to comment Share on other sites More sharing options...
MattH Posted June 17, 2011 Author Share Posted June 17, 2011 Thanks that works much better. It didn't show an example of /MODE READ in ImgBurn.exe /? so I didnt try it. Was thinking that mode was only a verify function. Link to comment Share on other sites More sharing options...
Recommended Posts