Helene2 Posted June 19, 2011 Posted June 19, 2011 ImgBurn.logHi, I have been using IMGburn successfully but, all of a sudden, it keeps failing ! Sometimes it says 'internal target failure' and sometimes it says 'invalid address for write. Can you help me with this please.
Rincewind Posted June 19, 2011 Posted June 19, 2011 (edited) Try a lens cleaning disc, in case there are dust particles on the lens. It seems that you are running the latest firmware on your burner so that also rules that out. Then try again, if it still doesn't work... It might be because of this: I 14:06:47 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 1x, 2x, 4x) Your issue could actually be solved just by getting better media. CMC MAG AM3 is pretty much crap. Go for Verbatim +R discs that have the disc ID MCC. Edited June 19, 2011 by Rincewind
Helene2 Posted June 19, 2011 Author Posted June 19, 2011 Thanks for your quick reply. I will get a lens cleaning disc and try that. I couldn't update the firmware myself so I sent the rewriter to a company called SVP communications and they did it for me. They didn't have time to try lots of different discs but they told me that Datawrite Titanium discs definitely worked and I have been using them successfully ever since (although I have tried some different brands, including Verbatim, and they didn't work.) All the time I have been using IMGburn successfully, I have been using the Datawrites. Try a lens cleaning disc, in case there are dust particles on the lens. It seems that you are running the latest firmware on your burner so that also rules that out. Then try again, if it still doesn't work... It might be because of this: I 14:06:47 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 1x, 2x, 4x) Your issue could actually be solved just by getting better media. CMC MAG AM3 is pretty much crap. Go for Verbatim +R discs that have the disc ID MCC.
Rincewind Posted June 20, 2011 Posted June 20, 2011 (edited) I never heard of "data write titanium", and anyways 'for the most part' brand name isn't always relevant (except for Verbatim mostly). You can buy all the brand names, such as TDK, Maxell etc. That all is irrelevant, what is relevant is as I stated before the dye(disc ID). You'll be shocked to see under imgburn each burnable disc what the disc ID is. It is never the brand itself (except maybe sometimes on BD-Rs). For DVDs and CDs in store bought discs tend to either have CMC-MAG for the disc ID, as shown in your log, or Ritek. Verbatim discs have been seen to have the better quality for DVD+R discs (MCC = Mitsubishi Chemical Company). For CD-Rs it is something like TYxx (Tayo-Yuden), and just to avoid confusion Tayo Yuden is not Verbatims but are also recommended for CD-Rs, and I think DVD - or +, I could never remember that one. LUK would know . I don't know why your drive would not accept DVD+R Verbatim discs, perhaps it is a bad batch? In any case you should consider ordering online. If for some odd/dumb reason your burn absolutely refuses to burn Verbatim discs, then at that point you may as well consider a new burner, but again that would be the last resort. I find it suspect that your burner would refuse to burn higher quality media... Edited June 20, 2011 by Rincewind
Cynthia Posted June 20, 2011 Posted June 20, 2011 That burner was releases 8 years ago. I would double the money you will need to spend on one cleaning disc and get a new burner.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now