Problems Burning with Verbatim DL

[ssj5goku]

Hi im having problems burning my legal backups of my xbox 360 games the layer break is set to 1913760 in the settings ive been burning using Singapore Verbatim DVD+R DL at speeds of 2.4x and 4x, my burner is in a Samsung R530 laptop its a tsstcorp cddvdw ts-l633c, they burn fine but then it just says that the disk is empty and that the layerbreak was actually set to 2086912 when scanning the dvd using ABGX??????

 

Im using good quality media burning at low speed and all the time getting these bad burns?

 

Can anyone help?

 

Also there is no firmware update for my drive i have the latest

 

; //****************************************\\

; ImgBurn Version 2.5.5.0 - Log

; Monday, 18 July 2011, 00:38:02

; \\****************************************//

;

;

I 00:06:57 ImgBurn Version 2.5.5.0 started!

I 00:06:57 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600)

I 00:06:57 Total Physical Memory: 3,076,720 KB - Available: 1,827,940 KB

W 00:06:57 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 00:06:57 Initialising SPTI...

I 00:06:57 Searching for SCSI / ATAPI devices...

I 00:06:57 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633C SC01 (E:) (ATAPI)

I 00:06:57 -> Drive 2 - Info: PAZEHQR HYRODYZ 1.03 (F:) (SCSI)

I 00:06:57 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 00:08:21 Operation Started!

I 00:08:21 Source File: C:\Users\Adam\Desktop\s-fear3.dvd

I 00:08:21 Source File Sectors: 3,827,488 (MODE1/2048)

I 00:08:21 Source File Size: 7,838,695,424 bytes

I 00:08:21 Source File Volume Identifier: DVD_ROM

I 00:08:21 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 00:08:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 00:08:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 00:08:21 Source File File System(s): ISO9660, UDF (1.50)

I 00:08:21 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633C SC01 (E:) (ATAPI)

I 00:08:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 00:08:21 Destination Media Sectors: 4,173,824

I 00:08:21 Write Mode: DVD

I 00:08:21 Write Type: DAO

I 00:08:21 Write Speed: 4x

I 00:08:21 Link Size: Auto

I 00:08:21 Lock Volume: Yes

I 00:08:21 Test Mode: No

I 00:08:21 OPC: No

I 00:08:21 BURN-Proof: Enabled

I 00:08:21 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 00:08:21 Book Type Setting: DVD-ROM

I 00:08:21 User Specified L0 Data Zone Capacity: 1,913,760

I 00:08:47 Set L0 Data Zone Capacity Succeeded!

I 00:08:47 Filling Buffer... (40 MB)

I 00:08:48 Writing LeadIn...

I 00:09:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 00:09:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 00:09:12 Writing Layer 0... (LBA: 0 - 1913759)

I 00:22:00 Writing Layer 1... (LBA: 1913760 - 3827487)

I 00:35:36 Synchronising Cache...

I 00:35:56 Closing Track...

I 00:36:18 Finalising Disc...

I 00:37:15 Exporting Graph Data...

I 00:37:15 Graph Data File: C:\Users\Adam\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633C_SC01_18-JULY-2011_00-08_MKM-003-00_4x.ibg

I 00:37:15 Export Successfully Completed!

I 00:37:15 Operation Successfully Completed! - Duration: 00:28:53

I 00:37:15 Average Write Rate: 4,832 KB/s (3.5x) - Maximum Write Rate: 5,634 KB/s (4.1x)

I 00:38:02 Close Request Acknowledged

I 00:38:02 Closing Down...

I 00:38:02 Shutting down SPTI...

I 00:38:02 ImgBurn closed!

Edited July 18, 2011 by ssj5goku

[mmalves]

Make sure you include a copy of the program's log in your post. No log =

[Cynthia]

Could be good to use the verify option to check if the burn actually was good or not.