SH-S223C SB07 Write Speed Miscompare

[xavdeman]

I've recently got a new Samsung drive. The SH-S223C which I've updated to the latest firmware: SB07

While burning a DL-DVD I got the error: W 01:00:36 Write Speed Miscompare! - MODE SENSE: 11.080 KB/s (8x), GET PERFORMANCE: 8.310 KB/s (6x)

Now I read the topic http://forum.imgburn.com/index.php?showtopic=11300

In http://forum.imgburn.com/index.php?showtopic=11300&view=findpost&p=100927 post number 9 Lightning says it's a bug in that drive's firmware and later, in post #18 he says "Yes it's done, I have worked around the issue with these drives.".

 

Maybe this drive needs a workaround too, since the disk ended up being unreadable in the majority of the drives I have.

I also think it's strange that it miscompares to 6x, but the log says: I 01:16:54 Average Write Rate: 8.659 KB/s (6.3x) - Maximum Write Rate: 11.174 KB/s (8.1x)

So the speed has been fluctuating a lot.

 

Log below and graph data attached.

I 00:57:55 ImgBurn Version 2.5.5.0 started!
I 00:57:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:57:55 Total Physical Memory: 4.193.460 KB  -  Available: 2.616.460 KB
I 00:57:55 Initialising SPTI...
I 00:57:55 Searching for SCSI / ATAPI devices...
I 00:57:55 -> Drive 1 - Info: DTSOFT BDROM 1.05 (I:) (Virtual)
I 00:57:55 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S223C SB07 (D:) (SATA)
I 00:57:55 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 01:00:35 Operation Started!
I 01:00:35 Source File: F:\image.dvd
I 01:00:35 Source File Sectors: 3.827.488 (MODE1/2048)
I 01:00:35 Source File Size: 7.838.695.424 bytes
I 01:00:35 Source File Volume Identifier: DVD_ROM
I 01:00:35 Source File Volume Set Identifier: d0a44000MS UDFBridge
I 01:00:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 01:00:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 01:00:35 Source File File System(s): ISO9660; UDF (1.50)
I 01:00:35 Destination Device: [0:2:0] TSSTcorp CDDVDW SH-S223C SB07 (D:) (SATA)
I 01:00:35 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x; 6x; 8x)
I 01:00:35 Destination Media Sectors: 4.173.824
I 01:00:35 Write Mode: DVD
I 01:00:35 Write Type: DAO
I 01:00:36 Write Speed: MAX
I 01:00:36 Link Size: Auto
I 01:00:36 Lock Volume: Yes
I 01:00:36 Test Mode: No
I 01:00:36 OPC: No
I 01:00:36 BURN-Proof: Enabled
W 01:00:36 Write Speed Miscompare! - MODE SENSE: 11.080 KB/s (8x), GET PERFORMANCE: 8.310 KB/s (6x)
I 01:00:36 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x)
I 01:00:36 Book Type Setting: DVD-ROM
I 01:00:36 Optimal L0 Data Zone Capacity: 1.913.760
I 01:00:36 Optimal L0 Data Zone Method: Copied From Original Disc
I 01:01:28 Set L0 Data Zone Capacity Succeeded!
I 01:01:28 Filling Buffer... (40 MB)
I 01:01:28 Writing LeadIn...
I 01:01:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 01:01:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 01:01:35 Writing Layer 0... (LBA: 0 - 1913759)
I 01:08:43 Writing Layer 1... (LBA: 1913760 - 3827487)
I 01:16:19 Synchronising Cache...
I 01:16:20 Closing Track...
I 01:16:21 Finalising Disc...
I 01:16:54 Exporting Graph Data...
I 01:16:54 Graph Data File: C:\Users\xavdeman\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB07_WOENSDAG-20-JULI-2011_1-00_RITEK-S04-66_MAX.ibg
I 01:16:54 Export Successfully Completed!
I 01:16:54 Operation Successfully Completed! - Duration: 00:16:18
I 01:16:54 Average Write Rate: 8.659 KB/s (6.3x) - Maximum Write Rate: 11.174 KB/s (8.1x)

Edited July 20, 2011 by xavdeman

[Cynthia]

Even if it burned ok, it can still be a crappy burn. Verify would check that.

 

W = Warning

E = Error

[LIGHTNING UK!]

The Write Speed Miscompare issue there is not the same as the one talked about in that thread. No workaround is necessary.

 

You just have this problem...

 

http://forum.imgburn.com/index.php?showtopic=8000