Ghanshyam Posted July 23, 2011 Share Posted July 23, 2011 I was unable to post in forums, so trying here. I am trying to build a Win7 bootable disk by following steps here: Win 7 Code 5 patch I see the author does not ask us to change "Sectors to Load" as "8" whereas your guide here: Win7 disc guide says choose "8". I did try an 8 and got an error, maybe because I chose boot.bin from vLite as mentioned in the first link above? I have not yet burnt the DVD since I am unsure whether 4 or 8 is correct. Any advice? Link to comment Share on other sites More sharing options...
mmalves Posted July 23, 2011 Share Posted July 23, 2011 Look at the size of boot.bin: if it's 2KB then sectors to load is 4, or if it's 4KB in size then sectors to load is 8. Link to comment Share on other sites More sharing options...
Ghanshyam Posted July 23, 2011 Author Share Posted July 23, 2011 Look at the size of boot.bin: if it's 2KB then sectors to load is 4, or if it's 4KB in size then sectors to load is 8. I verified that the .bin file I have taken is 2KB, so "4" is what I chose. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts