newb Posted July 27, 2011 Posted July 27, 2011 (edited) I know it's been around quite often but still i couldn't find a helpful hint yet, so I'm asking. Why is it, ImgBurn gives me an error at the lead-in already? It doesn't even start writing. I'm curious, i had to re-setup my pc about a week ago, before, no problems burning TDK DVD+R DL discs, since, no chance of doing anything, with verbatim DVD+R DL 8xspeed got latest drivers on my drive log file : I 16:58:23 ImgBurn Version 2.5.5.0 started! I 16:58:23 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:58:23 Total Physical Memory: 4.193.336 KB - Available: 2.755.636 KB I 16:58:23 Initialising SPTI... I 16:58:23 Searching for SCSI / ATAPI devices... I 16:58:23 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G: ) (Virtual) I 16:58:23 -> Drive 2 - Info: DTSOFT BDROM 1.05 (I: ) (Virtual) I 16:59:01 -> Drive 3 - Info: TSSTcorp CDDVDW SH-S223C SB00 (F: ) (ATA) I 16:59:01 Found 1 DVD±RW/RAM and 2 BD-ROMs! I 17:00:55 Operation Started! I 17:00:55 Source File: C:\*****\*****.dvd I 17:00:55 Source File Sectors: 3.825.924 (MODE1/2048) I 17:00:55 Source File Size: 7.835.492.352 bytes I 17:00:55 Source File Volume Identifier: XGD2DVD_NTSC I 17:00:55 Source File Volume Set Identifier: 34672923 I 17:00:55 Source File Implementation Identifier: Sonic Scenarist 3.1 I 17:00:55 Source File File System(s): ISO9660; UDF (1.02) I 17:00:55 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S223C SB00 (F: ) (ATA) I 17:00:55 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 17:00:55 Destination Media Sectors: 4.173.824 I 17:00:55 Write Mode: DVD I 17:00:55 Write Type: DAO I 17:00:55 Write Speed: MAX I 17:00:55 Link Size: Auto I 17:00:55 Lock Volume: Yes I 17:00:55 Test Mode: No I 17:00:55 OPC: No I 17:00:55 BURN-Proof: Enabled W 17:00:55 Write Speed Miscompare! - MODE SENSE: 13.850 KB/s (10x), GET PERFORMANCE: 8.310 KB/s (6x) I 17:00:55 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x) I 17:00:55 Book Type Setting: DVD-ROM I 17:00:55 Optimal L0 Data Zone Capacity: 1.913.760 I 17:00:55 Optimal L0 Data Zone Method: Copied From Original Disc I 17:01:33 Set L0 Data Zone Capacity Succeeded! I 17:01:34 Filling Buffer... (40 MB) I 17:01:35 Writing LeadIn... I 17:01:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 17:01:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 17:01:38 Writing Layer 0... (LBA: 0 - 1913759) W 17:01:40 Failed to Write Sectors 736 - 767 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x82) W 17:01:40 Retrying (1 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (2 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (3 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (4 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (5 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (6 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (7 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (8 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (9 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (10 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (11 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (12 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (13 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (14 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (15 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (16 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (17 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (18 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (19 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write W 17:01:40 Retrying (20 of 20)... W 17:01:40 Retry Failed - Reason: Invalid Address For Write E 17:08:19 Failed to Write Sectors 736 - 767 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x82) E 17:08:19 Next Writable Address: 208 I 17:08:19 Synchronising Cache... W 17:08:23 User opted to skip the 'Close Track/Session/Disc' functions. E 17:08:23 Failed to Write Image! I 17:08:23 Exporting Graph Data... I 17:08:23 Graph Data File: C:\Users\******\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB00_MITTWOCH-27-JULI-2011_17-00_MKM-003-00_MAX.ibg I 17:08:23 Export Successfully Completed! E 17:08:23 Operation Failed! - Duration: 00:07:27 I 17:08:23 Average Write Rate: 3 KB/s (0.0x) - Maximum Write Rate: 3 KB/s (0.0x) I 17:08:26 Close Request Acknowledged I 17:08:26 Closing Down... I 17:08:26 Shutting down SPTI... I 17:08:26 ImgBurn closed! Thanks in advance EDIT : No issues on Verbatim DVD-R single layer discs! but burned the .iso file directly this time, with the double layer I chose the .dvd file as is recommendet for Xbox360 images Edited July 27, 2011 by newb
Rincewind Posted July 27, 2011 Posted July 27, 2011 (edited) It seems your model has been around for a while, and your firmware version seems quite out of date: http://www.firmwarehq.com/download_1886-file_SH-S223C_SB07.exe.html Try again after applying that firmware update. Edited July 27, 2011 by Rincewind
newb Posted July 29, 2011 Author Posted July 29, 2011 it just worked fine for two days, now I'm getting errors again log : I 13:48:59 Operation Started! I 13:48:59 Source File: E:\****\****.dvd I 13:48:59 Source File Sectors: 3.827.488 (MODE1/2048) I 13:48:59 Source File Size: 7.838.695.424 bytes I 13:48:59 Source File Volume Identifier: DVD_ROM I 13:48:59 Source File Volume Set Identifier: d0a44000MS UDFBridge I 13:48:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:48:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:48:59 Source File File System(s): ISO9660; UDF (1.50) I 13:48:59 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S223C SB07 (F:) (ATA) I 13:48:59 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x) I 13:48:59 Destination Media Sectors: 4.173.824 I 13:48:59 Write Mode: DVD I 13:48:59 Write Type: DAO I 13:48:59 Write Speed: 4x I 13:48:59 Link Size: Auto I 13:49:00 Lock Volume: Yes I 13:49:00 Test Mode: No I 13:49:00 OPC: No I 13:49:00 BURN-Proof: Enabled I 13:49:00 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 13:49:00 Book Type Setting: DVD-ROM I 13:49:00 User Specified L0 Data Zone Capacity: 1.913.760 I 13:49:26 Set L0 Data Zone Capacity Succeeded! I 13:49:26 Filling Buffer... (40 MB) I 13:49:27 Writing LeadIn... I 13:49:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:49:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:49:28 Writing Layer 0... (LBA: 0 - 1913759) W 13:49:37 Failed to Write Sectors 6912 - 6943 - Reason: Unknown (Write Error) (ASC: 0x0C, ASCQ: 0x82) W 13:49:37 Retrying (1 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (2 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (3 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (4 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (5 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (6 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (7 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (8 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (9 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (10 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (11 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (12 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (13 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (14 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (15 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (16 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (17 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (18 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (19 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write W 13:49:37 Retrying (20 of 20)... W 13:49:37 Retry Failed - Reason: Invalid Address For Write
ianymaty Posted July 29, 2011 Posted July 29, 2011 Try with a lens cleaning disc. Try 8x as the disc is rated, try the other speeds available too.
newb Posted July 29, 2011 Author Posted July 29, 2011 (edited) different speeds didn't work so far, although I'm not through all of them. but i got another error message EDIT : Happened twice, all the other times, imgbrun quits with the previous error, although the failing sectors vary EDIT : Still no issues burning single layer disc I 17:10:59 ImgBurn Version 2.5.5.0 started! I 17:10:59 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:10:59 Total Physical Memory: 4.193.336 KB - Available: 2.540.452 KB I 17:10:59 Initialising SPTI... I 17:10:59 Searching for SCSI / ATAPI devices... I 17:10:59 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 17:10:59 -> Drive 2 - Info: DTSOFT BDROM 1.05 (I:) (Virtual) I 17:10:59 -> Drive 3 - Info: TSSTcorp CDDVDW SH-S223C SB07 (F:) (ATA) I 17:10:59 Found 1 DVD±RW/RAM and 2 BD-ROMs! I 17:11:25 Operation Started! I 17:11:25 Source File: C:\***\****.img I 17:11:25 Source File Sectors: 2.207.776 (MODE1/2048) I 17:11:25 Source File Size: 4.521.525.248 bytes I 17:11:25 Source File Volume Identifier: ***** I 17:11:25 Source File Volume Set Identifier: 36755557 I 17:11:25 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT © 1997-2004 ROXIO, INC. - HAVE A NICE DAY I 17:11:25 Source File Implementation Identifier: Roxio Toast I 17:11:25 Source File File System(s): ISO9660; Joliet; UDF (1.02) I 17:11:25 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S223C SB07 (F:) (ATA) I 17:11:25 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x; 8x; 12x; 16x; 20x; 22x) I 17:11:25 Destination Media Sectors: 2.298.496 I 17:11:25 Write Mode: DVD I 17:11:25 Write Type: DAO I 17:11:25 Write Speed: MAX I 17:11:25 Link Size: Auto I 17:11:25 Lock Volume: Yes I 17:11:25 Test Mode: No I 17:11:25 OPC: No I 17:11:25 BURN-Proof: Enabled I 17:11:25 Write Speed Successfully Set! - Effective: 30.470 KB/s (22x) I 17:11:26 Filling Buffer... (40 MB) I 17:11:27 Writing LeadIn... I 17:12:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 2207775) I 17:12:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2207775) I 17:15:45 Synchronising Cache... I 17:15:53 Exporting Graph Data... I 17:15:53 Graph Data File: C:\Users\****\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223C_SB07_FREITAG-29-JULI-2011_17-11_MCC_03RG20_MAX.ibg I 17:15:54 Export Successfully Completed! I 17:15:54 Operation Successfully Completed! - Duration: 00:04:28 I 17:15:54 Average Write Rate: 20.537 KB/s (14.8x) - Maximum Write Rate: 30.000 KB/s (21.7x) Edited July 29, 2011 by newb
newb Posted July 29, 2011 Author Posted July 29, 2011 strange ... right after burning single layer dvd, double layer dvd works after the double layer, it won't do it again ?!
LIGHTNING UK! Posted July 29, 2011 Posted July 29, 2011 This is just a hardware problem (drive/firmware/media related), there's no magic fix for it. If you've tried all the supported speeds and it happens at each of them then you've done all you can do within the software. Maybe it's heat releated, maybe the drive is dirty, maybe the drive is faulty (burning DL's is harder than burning SL's), maybe the discs are faulty.
Recommended Posts