Jump to content

Recommended Posts

Posted (edited)

Hello.

1st, Id like to thank you for this great software, I have recently discovered it, & I like it a lot.

 

I am wondering about second session scenarios I have faced;

1. with some drive like my Optiarc for example, burning a 2 session image (audio & data in my case) fails on the 2nd session:

03:27:11 Writing LeadIn...

03:27:17 Failed to Write Sectors 242580 - 242606 - Reason: No Seek Complete

03:27:17 Retrying (1 of 20)...

03:27:23 Retry Failed - Reason: No Seek Complete

03:27:23 Retrying (2 of 20)...

03:27:29 Retry Failed - Reason: No Seek Complete

 

So I have looked for an option to eject the CD after burning each session, thinking this might be the problem, as the drive works great & has no problems,

have not found it, did I miss it ?

 

2. Can I write a second session on open discs that already have a1st session ?

3. Can I specify a write offset for the Audio tracks ?

Edited by Zip
Posted (edited)

sure.

 


03:24:56 Source File File System(s): ISO9660, Joliet
03:24:56 Destination Device: [2:0:0] Optiarc DVD RAD-5240S 1.03 (R:) (ATA)
03:24:56 Destination Media Type: CD-R (Disc ID: 97m26s66f, CMC Magnetics Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x)
03:24:56 Destination Media Sectors: 359,844
03:24:56 Write Mode: CD
03:24:56 Write Type: SAO
03:24:56 Write Speed: MAX
03:24:56 Lock Volume: Yes
03:24:56 Test Mode: No
03:24:56 OPC: No
03:24:56 BURN-Proof: Enabled
03:24:56 Write Speed Successfully Set! - Effective: 8,467 KB/s (48x)
03:24:56 Filling Buffer... (40 MB)
03:24:57 Writing LeadIn... (CD-TEXT)
03:25:11 Writing Session 1 of 2... (8 Tracks, LBA: 0 - 231329)
03:25:11 Writing Track 1 of 8... (AUDIO/2352, WAVE, LBA: 0 - 33414)
03:25:31 Writing Track 2 of 8... (AUDIO/2352, WAVE, LBA: 33415 - 56399)
03:25:46 Writing Track 3 of 8... (AUDIO/2352, WAVE, LBA: 56400 - 82149)
03:25:58 Writing Track 4 of 8... (AUDIO/2352, WAVE, LBA: 82150 - 115211)
03:26:13 Writing Track 5 of 8... (AUDIO/2352, WAVE, LBA: 115212 - 144511)
03:26:27 Writing Track 6 of 8... (AUDIO/2352, WAVE, LBA: 144512 - 170439)
03:26:37 Writing Track 7 of 8... (AUDIO/2352, WAVE, LBA: 170440 - 192624)
03:26:46 Writing Track 8 of 8... (AUDIO/2352, WAVE, LBA: 192625 - 231329)
03:27:00 Synchronising Cache...
03:27:11 Filling Buffer... (40 MB)
03:27:11 Writing LeadIn...
03:27:17 Failed to Write Sectors 242580 - 242606 - Reason: No Seek Complete
03:27:17 Retrying (1 of 20)...
03:27:23 Retry Failed - Reason: No Seek Complete
03:27:23 Retrying (2 of 20)...

Edited by Zip
Posted

Looks more as an issue with low quality media.

 

Tried to write with a speed lower than max = 48x?

 

(Speeds: 8x, 16x, 24x, 32x, 40x, 48x)
Posted (edited)

nope as the 1st session burned fine,

did the exact same thing on my liteon, it had no problem, with the same crappy Verbatim.

I was thinking maybe some drives need ejecting after a session, but I am guessing here,

So, is it possible to make Imgburn eject the disc after each intermediate session ?

Edited by Zip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.