Zip Posted July 31, 2011 Share Posted July 31, 2011 (edited) Hello. 1st, Id like to thank you for this great software, I have recently discovered it, & I like it a lot. I am wondering about second session scenarios I have faced; 1. with some drive like my Optiarc for example, burning a 2 session image (audio & data in my case) fails on the 2nd session: 03:27:11 Writing LeadIn... 03:27:17 Failed to Write Sectors 242580 - 242606 - Reason: No Seek Complete 03:27:17 Retrying (1 of 20)... 03:27:23 Retry Failed - Reason: No Seek Complete 03:27:23 Retrying (2 of 20)... 03:27:29 Retry Failed - Reason: No Seek Complete So I have looked for an option to eject the CD after burning each session, thinking this might be the problem, as the drive works great & has no problems, have not found it, did I miss it ? 2. Can I write a second session on open discs that already have a1st session ? 3. Can I specify a write offset for the Audio tracks ? Edited August 1, 2011 by Zip Link to comment Share on other sites More sharing options...
Cynthia Posted July 31, 2011 Share Posted July 31, 2011 Can you post the full log? Link to comment Share on other sites More sharing options...
Zip Posted August 1, 2011 Author Share Posted August 1, 2011 (edited) sure. 03:24:56 Source File File System(s): ISO9660, Joliet 03:24:56 Destination Device: [2:0:0] Optiarc DVD RAD-5240S 1.03 (R:) (ATA) 03:24:56 Destination Media Type: CD-R (Disc ID: 97m26s66f, CMC Magnetics Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x) 03:24:56 Destination Media Sectors: 359,844 03:24:56 Write Mode: CD 03:24:56 Write Type: SAO 03:24:56 Write Speed: MAX 03:24:56 Lock Volume: Yes 03:24:56 Test Mode: No 03:24:56 OPC: No 03:24:56 BURN-Proof: Enabled 03:24:56 Write Speed Successfully Set! - Effective: 8,467 KB/s (48x) 03:24:56 Filling Buffer... (40 MB) 03:24:57 Writing LeadIn... (CD-TEXT) 03:25:11 Writing Session 1 of 2... (8 Tracks, LBA: 0 - 231329) 03:25:11 Writing Track 1 of 8... (AUDIO/2352, WAVE, LBA: 0 - 33414) 03:25:31 Writing Track 2 of 8... (AUDIO/2352, WAVE, LBA: 33415 - 56399) 03:25:46 Writing Track 3 of 8... (AUDIO/2352, WAVE, LBA: 56400 - 82149) 03:25:58 Writing Track 4 of 8... (AUDIO/2352, WAVE, LBA: 82150 - 115211) 03:26:13 Writing Track 5 of 8... (AUDIO/2352, WAVE, LBA: 115212 - 144511) 03:26:27 Writing Track 6 of 8... (AUDIO/2352, WAVE, LBA: 144512 - 170439) 03:26:37 Writing Track 7 of 8... (AUDIO/2352, WAVE, LBA: 170440 - 192624) 03:26:46 Writing Track 8 of 8... (AUDIO/2352, WAVE, LBA: 192625 - 231329) 03:27:00 Synchronising Cache... 03:27:11 Filling Buffer... (40 MB) 03:27:11 Writing LeadIn... 03:27:17 Failed to Write Sectors 242580 - 242606 - Reason: No Seek Complete 03:27:17 Retrying (1 of 20)... 03:27:23 Retry Failed - Reason: No Seek Complete 03:27:23 Retrying (2 of 20)... Edited August 1, 2011 by Zip Link to comment Share on other sites More sharing options...
Cynthia Posted August 1, 2011 Share Posted August 1, 2011 Looks more as an issue with low quality media. Tried to write with a speed lower than max = 48x? (Speeds: 8x, 16x, 24x, 32x, 40x, 48x) Link to comment Share on other sites More sharing options...
Zip Posted August 1, 2011 Author Share Posted August 1, 2011 (edited) nope as the 1st session burned fine, did the exact same thing on my liteon, it had no problem, with the same crappy Verbatim. I was thinking maybe some drives need ejecting after a session, but I am guessing here, So, is it possible to make Imgburn eject the disc after each intermediate session ? Edited August 1, 2011 by Zip Link to comment Share on other sites More sharing options...
Recommended Posts