Apekaas Posted August 24, 2011 Posted August 24, 2011 Hello everyone, I came to the point of banging my head against the desk in pure horror of my burner. Since recently I've always been able to burn my 360 backups with no problem. Burned loads, and always on the same disks, never had a coaster and never had a game that didnt work in my 360. I use MediaRange DVD+R DL 8x. However for some reason I'm getting an error recently and I can't seem to fix it. I hope one of you can take a look at my log and point me in the right direction, either to the shop for a new burner or a less costly solution ; //****************************************\\ ; ImgBurn Version 2.5.5.0 - Log ; Wednesday, 24 August 2011, 11:58:19 ; \\****************************************// ; ; I 11:35:11 ImgBurn Version 2.5.5.0 started! I 11:35:11 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 11:35:11 Total Physical Memory: 8.378.488 KB - Available: 6.559.140 KB W 11:35:11 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 11:35:11 Initialising SPTI... I 11:35:11 Searching for SCSI / ATAPI devices... I 11:35:11 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S223F SB03 (D:) (ATA) I 11:35:11 Found 1 DVD±RW/RAM! I 11:36:03 Operation Started! I 11:36:03 Source File: E:\cpx-dehr\cpx-dehr.dvd I 11:36:03 Source File Sectors: 3.827.488 (MODE1/2048) I 11:36:03 Source File Size: 7.838.695.424 bytes I 11:36:03 Source File Volume Identifier: DVD_ROM I 11:36:03 Source File Volume Set Identifier: d0a44000MS UDFBridge I 11:36:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:36:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:36:03 Source File File System(s): ISO9660; UDF (1.50) I 11:36:03 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-S223F SB03 (D:) (ATA) I 11:36:03 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 4x; 6x; 8x) I 11:36:03 Destination Media Sectors: 4.173.824 I 11:36:03 Write Mode: DVD I 11:36:03 Write Type: DAO I 11:36:03 Write Speed: 2,4x I 11:36:03 Link Size: Auto I 11:36:03 Lock Volume: Yes I 11:36:03 Test Mode: No I 11:36:03 OPC: No I 11:36:03 BURN-Proof: Enabled W 11:36:03 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) I 11:36:03 Book Type Setting: DVD-ROM I 11:36:03 User Specified L0 Data Zone Capacity: 1.913.760 I 11:36:48 Set L0 Data Zone Capacity Succeeded! I 11:36:49 Filling Buffer... (40 MB) I 11:36:50 Writing LeadIn... I 11:36:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 11:36:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 11:36:54 Writing Layer 0... (LBA: 0 - 1913759) W 11:37:06 Failed to Write Sectors 32704 - 32735 - Reason: Kan de opdracht niet uitvoeren door een fout in een I/O-apparaat. W 11:37:06 Retrying (1 of 20)... W 11:37:06 Retry Failed - Reason: Logical Unit Communication Parity Error W 11:37:06 Retrying (2 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (3 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (4 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (5 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (6 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (7 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (8 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (9 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (10 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (11 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (12 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (13 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (14 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (15 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (16 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (17 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (18 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (19 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write W 11:37:11 Retrying (20 of 20)... W 11:37:11 Retry Failed - Reason: Invalid Address For Write E 11:37:28 Failed to Write Sectors 32704 - 32735 - Reason: Kan de opdracht niet uitvoeren door een fout in een I/O-apparaat. E 11:37:28 Next Writable Address: 32736 I 11:37:28 Synchronising Cache... W 11:37:31 User opted to skip the 'Close Track/Session/Disc' functions. E 11:37:31 Failed to Write Image! I 11:37:31 Exporting Graph Data... I 11:37:31 Graph Data File: C:\Users\Thom\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S223F_SB03_WEDNESDAY-24-AUGUST-2011_11-36_MBIPG101-R10-65_2,4x.ibg I 11:37:31 Export Successfully Completed! E 11:37:31 Operation Failed! - Duration: 00:01:27 I 11:37:31 Average Write Rate: 1.923 KB/s (1.4x) - Maximum Write Rate: 5.663 KB/s (4.1x) I 11:58:19 Close Request Acknowledged I 11:58:19 Closing Down... I 11:58:19 Shutting down SPTI... I 11:58:19 ImgBurn closed!
mmalves Posted August 24, 2011 Posted August 24, 2011 Look for the latest drivers for your system's chipset / storage controllers (this website might help). You could also try a new SATA data cable on your cable on your burner and make sure the SATA power cable is firmly and evenly seated in the connector. Lastly, you could try plugging the burner on other SATA ports. In any case, it would be also better if you used better quality media as well (please read this).
Apekaas Posted August 24, 2011 Author Posted August 24, 2011 Look for the latest drivers for your system's chipset / storage controllers (this website might help). You could also try a new SATA data cable on your cable on your burner and make sure the SATA power cable is firmly and evenly seated in the connector. Lastly, you could try plugging the burner on other SATA ports. In any case, it would be also better if you used better quality media as well (please read this). You're an absolute legend! It worked what you suggested! I replaced my SATA cable with a new one and just now I finished a backup with succes Didn't think about something like that as I was still able to read/play disks with the drive. So still a bit weird, but I'm glad I didn't storm directly to a shop to get a new one Thanks again, you made my day!
Recommended Posts