Nchalada Posted September 11, 2011 Posted September 11, 2011 G'day... Just tried to burn an ISO that needed a dual-layer disc and got the can't verify message. I 18:03:49 ImgBurn Version 2.5.5.0 started! I 18:03:49 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 18:03:49 Total Physical Memory: 4,192,752 KB - Available: 1,333,276 KB I 18:03:49 Initialising SPTI... I 18:03:49 Searching for SCSI / ATAPI devices... I 18:03:49 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22NS70 EX00 (D:) (ATA) I 18:03:49 Found 1 DVD±RW/RAM! I 18:05:48 Operation Started! I 18:05:48 Source File: C:\Things.that.are.important.iso I 18:05:48 Source File Sectors: 3,936,208 (MODE1/2048) I 18:05:48 Source File Size: 8,061,353,984 bytes I 18:05:48 Source File Volume Identifier: ImportantThings I 18:05:48 Source File File System(s): ISO9660, Joliet I 18:05:48 Destination Device: [1:0:0] HL-DT-ST DVDRAM GH22NS70 EX00 (D:) (ATA) I 18:05:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 8x) I 18:05:48 Destination Media Sectors: 4,173,824 I 18:05:48 Write Mode: DVD I 18:05:48 Write Type: DAO I 18:05:48 Write Speed: MAX I 18:05:48 Link Size: Auto I 18:05:48 Lock Volume: Yes I 18:05:48 Test Mode: No I 18:05:48 OPC: No I 18:05:48 BURN-Proof: Enabled I 18:05:49 Write Speed Successfully Set! - Effective: 11,079 KB/s (8x) I 18:05:49 Book Type Setting: DVD-ROM I 18:05:49 Optimal L0 Data Zone Capacity: 1,968,112 I 18:05:49 Optimal L0 Data Zone Method: ECC Block Boundary I 18:06:38 Set L0 Data Zone Capacity Succeeded! I 18:06:38 Filling Buffer... (128 MB) I 18:06:41 Writing LeadIn... I 18:06:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 3936207) I 18:06:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3936207) I 18:06:45 Writing Layer 0... (LBA: 0 - 1968111) I 18:15:38 Writing Layer 1... (LBA: 1968112 - 3936207) I 18:23:57 Synchronising Cache... I 18:23:58 Closing Track... W 18:24:24 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 18:24:24 Close Track Failed! - Reason: Program Memory Area Update Failure W 18:24:24 Retrying (1 of 3)... I 18:24:35 Finalising Disc... W 18:25:02 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 18:25:02 Finalise Disc Failed! - Reason: Program Memory Area Update Failure W 18:25:02 Retrying (1 of 3)... I 18:25:12 Exporting Graph Data... I 18:25:12 Graph Data File: C:\Users\Tony\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS70_EX00_SUNDAY-11-SEPTEMBER-2011_18-05_RICOHJPN-D01-67_MAX.ibg I 18:25:12 Export Successfully Completed! I 18:25:12 Operation Successfully Completed! - Duration: 00:19:24 I 18:25:12 Average Write Rate: 7,628 KB/s (5.5x) - Maximum Write Rate: 11,138 KB/s (8.0x) I 18:25:12 Cycling Tray before Verify... W 18:25:46 Waiting for device to become ready... I 18:26:55 Device Ready! E 18:26:55 CompareImageFileLayouts Failed! - Session Count Not Equal (1/0) E 18:26:55 Verify Failed! - Reason: Layouts do not match. Any ideas? Burn at a slower speed? Cheers, Nchy
LIGHTNING UK! Posted September 11, 2011 Posted September 11, 2011 It's all in here... http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts