TQuizzle Posted September 23, 2011 Posted September 23, 2011 I've been trying to figure out this problem for a little while now. All of the sudden, I cannot burn any images. I made sure to update the firmware of my device as well as make sure I've got the latest version of the software. Everything was working until today. I've tried multiple images and multiple different media all with the same result. Drive Bad? Log: I 21:12:43 ImgBurn Version 2.5.5.0 started! I 21:12:43 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 21:12:43 Total Physical Memory: 3,134,772 KB - Available: 2,086,628 KB I 21:12:43 Initialising SPTI... I 21:12:43 Searching for SCSI / ATAPI devices... I 21:12:43 -> Drive 1 - Info: HL-DT-ST DVDRAM GH22LS50 TL03 (D:) (ATA) I 21:12:43 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown) I 21:12:43 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown) I 21:12:43 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 21:12:54 Operation Started! I 21:12:54 Source File: C:\Users\MyName\Downloads\FreeNAS-8.0.1-RC2-i386.iso I 21:12:54 Source File Sectors: 51,758 (MODE1/2048) I 21:12:54 Source File Size: 106,000,384 bytes I 21:12:54 Source File Volume Identifier: CDROM I 21:12:54 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:12:54 Source File File System(s): ISO9660 (Bootable) I 21:12:54 Destination Device: [3:0:0] HL-DT-ST DVDRAM GH22LS50 TL03 (D:) (ATA) I 21:12:54 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 4x, 8x, 16x, 24x, 32x, 40x, 48x) I 21:12:54 Destination Media Sectors: 359,843 I 21:12:54 Write Mode: DVD I 21:12:54 Write Type: DAO I 21:12:54 Write Speed: MAX I 21:12:54 Link Size: Auto I 21:12:54 Lock Volume: Yes I 21:12:54 Test Mode: No I 21:12:54 OPC: No I 21:12:54 BURN-Proof: Enabled I 21:12:54 Write Speed Successfully Set! - Effective: 8,468 KB/s (6.3x) I 21:12:55 Filling Buffer... (40 MB) I 21:12:58 Writing LeadIn... W 21:12:59 Failed to Write Sectors 0 - 31 - Reason: Command Sequence Error W 21:12:59 Retrying (1 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (2 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (3 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (4 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (5 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (6 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (7 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (8 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (9 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (10 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (11 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (12 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (13 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (14 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (15 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (16 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (17 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (18 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (19 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error W 21:12:59 Retrying (20 of 20)... W 21:12:59 Retry Failed - Reason: Command Sequence Error E 21:13:05 Failed to Write Sectors 0 - 31 - Reason: Command Sequence Error I 21:13:05 Synchronising Cache... W 21:13:08 User opted to skip the 'Close Track/Session/Disc' functions. E 21:13:08 Failed to Write Image! E 21:13:08 Operation Failed! - Duration: 00:00:14 I 21:13:08 Average Write Rate: N/A - Maximum Write Rate: N/A
Cynthia Posted September 23, 2011 Posted September 23, 2011 I 21:12:54 Write Mode: DVD Change the setting back to "Auto".
TQuizzle Posted September 23, 2011 Author Posted September 23, 2011 I 21:12:54 Write Mode: DVD Change the setting back to "Auto". Cynthia - I have looked all over, where is that setting?
Cynthia Posted September 23, 2011 Posted September 23, 2011 Settings in the Write tab/page 1 Change the setting for "Write Mode" to "Auto".
Recommended Posts