Jump to content

Recommended Posts

Posted

I'm using Memorex DVD+r DL disks. I've done this dozens of times already using Memorex and this is the first time it has happened to me. After burning for a while I get this message.

J0YHw.png

 

I've wasted about 10 disks doing this and it seems to always happen at either 55% or 62% (not sure if this means anything).

 

I've tried burning at different speeds and turning off programs to save memory and it still doesn't work. Let me know what you think.

 

Once again, I've done this at least 40 times using Memorex disks without any problems over the past few months. I took a break for about a month and now I get this problem.

 

Logs

I 16:51:26 ImgBurn Version 2.5.5.0 started!

I 16:51:26 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)

I 16:51:26 Total Physical Memory: 1,833,072 KB - Available: 983,064 KB

I 16:51:26 Initialising SPTI...

I 16:51:26 Searching for SCSI / ATAPI devices...

I 16:51:26 -> Drive 1 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown)

I 16:51:26 -> Drive 2 - Info: Optiarc DVD RW AD-7580S FX04 (D:) (RAID)

I 16:51:26 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 16:51:26 Found 1 DVD-ROM and 2 DVD±RW/RAMs!

I 16:51:58 Searching for SCSI / ATAPI devices...

I 16:51:58 -> Drive 1 - Info: MagicISO Virtual DVD-ROM 1.0A (E:) (Unknown)

I 16:51:58 -> Drive 2 - Info: Optiarc DVD RW AD-7580S FX04 (D:) (RAID)

I 16:51:58 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 16:51:58 Found 1 DVD-ROM and 2 DVD±RW/RAMs!

I 16:52:55 Operation Started!

I 16:52:55 Source File: C:\Users\Kenneth\Desktop\iso\B2TB-mortal kombat.dvd

I 16:52:56 Source File Sectors: 3,827,488 (MODE1/2048)

I 16:52:56 Source File Size: 7,838,695,424 bytes

I 16:52:56 Source File Volume Identifier: DVD_ROM

I 16:52:56 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 16:52:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:52:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:52:56 Source File File System(s): ISO9660, UDF (1.50)

I 16:52:56 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 16:52:56 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x)

I 16:52:56 Destination Media Sectors: 4,173,824

I 16:52:56 Write Mode: DVD

I 16:52:56 Write Type: DAO

I 16:52:56 Write Speed: 4x

I 16:52:56 Link Size: Auto

I 16:52:56 Lock Volume: Yes

I 16:52:56 Test Mode: No

I 16:52:56 OPC: No

I 16:52:56 BURN-Proof: Enabled

I 16:52:56 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 16:52:56 Book Type Setting: DVD-ROM

I 16:52:56 Optimal L0 Data Zone Capacity: 1,913,760

I 16:52:56 Optimal L0 Data Zone Method: Copied From Original Disc

I 16:54:27 Set L0 Data Zone Capacity Succeeded!

I 16:54:28 Filling Buffer... (40 MB)

I 16:54:30 Writing LeadIn...

I 16:54:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 16:54:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 16:54:58 Writing Layer 0... (LBA: 0 - 1913759)

I 17:07:01 Writing Layer 1... (LBA: 1913760 - 3827487)

W 17:09:34 Failed to Write Sectors 2124512 - 2124543 - Reason: Write Error

W 17:09:34 Retrying (1 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (2 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (3 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (4 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (5 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (6 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (7 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (8 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (9 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (10 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (11 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (12 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (13 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (14 of 20)...

W 17:10:00 Retry Failed - Reason: Invalid Address For Write

W 17:10:00 Retrying (15 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

W 17:10:01 Retrying (16 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

W 17:10:01 Retrying (17 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

W 17:10:01 Retrying (18 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

W 17:10:01 Retrying (19 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

W 17:10:01 Retrying (20 of 20)...

W 17:10:01 Retry Failed - Reason: Invalid Address For Write

E 17:14:27 Failed to Write Sectors 2124512 - 2124543 - Reason: Write Error

E 17:14:27 Next Writable Address: 2124064

I 17:14:27 Synchronising Cache...

W 17:14:30 User opted to skip the 'Close Track/Session/Disc' functions.

E 17:14:30 Failed to Write Image!

I 17:14:31 Exporting Graph Data...

I 17:14:31 Graph Data File: C:\Users\Kenneth\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084D_TS01_FRIDAY-SEPTEMBER-23-2011_4-52_PM_MBIPG101-R10-65_4x.ibg

I 17:14:31 Export Successfully Completed!

E 17:14:31 Operation Failed! - Duration: 00:21:34

I 17:14:31 Average Write Rate: 3,634 KB/s (2.6x) - Maximum Write Rate: 5,695 KB/s (4.1x)

Posted

The old Memorex discs that could be written in the past, did they have the same media code? This media code is usually tricky for burners to deal with as it's rare to see it supported by the firmware/burner.

 

I 16:52:56 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 16:52:56 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x)

Insert an old disc and switch to read mode and look in text of the right side of the progrram under disc info.

Posted (edited)

The old Memorex discs that could be written in the past, did they have the same media code? This media code is usually tricky for burners to deal with as it's rare to see it supported by the firmware/burner.

 

I 16:52:56 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 16:52:56 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 3x, 4x)

Insert an old disc and switch to read mode and look in text of the right side of the progrram under disc info.

 

 

Here is the info from an old disk that was burned successfully.

TSSTcorp CDDVDW SE-S084D TS01 (USB)

Current Profile: DVD+R DL

 

Disc Information:

Status: Complete

State of Last Session: Complete

Erasable: No

Sessions: 1

Sectors: 3,825,936

Size: 7,835,516,928 bytes

Time: 850:14:36 (MM:SS:FF)

 

File System Information:

Sectors: 2,724

Size: 5,578,752 bytes

Time: 00:38:24 (MM:SS:FF)

 

TOC Information:

Session 1... (LBA: 0)

-> Track 01 (Mode 1, LBA: 0 - 3825935)

-> LeadOut (LBA: 3825936)

 

Track Information:

Session 1...

-> Track 01 (LTSA: 0, LTS: 3825936, LRA: 0)

 

Disc Control Blocks Information:

TSSTcorp SE-S084D

 

Physical Format Information (ADIP - L0):

Disc ID: RITEK-S04-66

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: RITEK-S04-66

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: RITEK-S04-66

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,579,023

Last Physical Sector in Layer 0: 2,110,367

 

Physical Format Information (Last Recorded - L1):

Disc ID: RITEK-S04-66

Book Type: DVD-ROM

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,579,023

Last Physical Sector in Layer 0: 2,110,367

 

Layer Information:

Layer 0 Sectors: 1,913,760 (50.02%)

Layer 1 Sectors: 1,912,176 (49.98%)

 

Are you looking for MBIPG101-R10-65 ? Then yes, it's different. I guess I got lucky the first time and got a good batch but this second batch is crap?

 

Something else I just noticed, the ones that failed to burn successfully come up as empty with 25.3 gb free space when put inside my computer.

 

I've been buying these off Amazon. Is there anyway I can tell if they will be RITEK or MBIPG101 before purchasing? I just realized the first batch was from an amazon seller and the second batch was from Amazon.

Edited by Pirate Problem
Posted

I bought new disks, Verbatims from singapore (they're supposed to be the best) and every disk I've tried burned to completion. But when I try to verify, about half disks failed verification. About 3/4 of the disks that failed failed at 50%, others failed at around the 90% mark. But they all still work when I put them into my Xbox (games play fine as far as I can tell). What should I do now? Get a new burner?

Posted
I 13:37:48 ImgBurn Version 2.5.5.0 started!

I 13:37:48 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 13:37:48 Total Physical Memory: 1,833,072 KB - Available: 1,037,532 KB

I 13:37:48 Initialising SPTI...

I 13:37:48 Searching for SCSI / ATAPI devices...

I 13:37:48 -> Drive 1 - Info: Optiarc DVD RW AD-7580S FX04 (D:) (RAID)

I 13:37:48 -> Drive 2 - Info: TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 13:37:48 Found 2 DVD±RW/RAMs!

I 13:37:59 Operation Started!

I 13:37:59 Source File: C:\Users\Kenneth\Desktop\iso\complex-deadisland.dvd

I 13:37:59 Source File Sectors: 3,827,488 (MODE1/2048)

I 13:37:59 Source File Size: 7,838,695,424 bytes

I 13:37:59 Source File Volume Identifier: DVD_ROM

I 13:38:00 Source File Volume Set Identifier: d68a0000MS UDFBridge

I 13:38:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 13:38:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 13:38:00 Source File File System(s): ISO9660, UDF (1.50)

I 13:38:00 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 13:38:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 13:38:00 Destination Media Sectors: 4,173,824

I 13:38:00 Write Mode: DVD

I 13:38:00 Write Type: DAO

I 13:38:00 Write Speed: 4x

I 13:38:00 Link Size: Auto

I 13:38:00 Lock Volume: Yes

I 13:38:00 Test Mode: No

I 13:38:00 OPC: No

I 13:38:00 BURN-Proof: Enabled

I 13:38:00 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 13:38:00 Book Type Setting: DVD-ROM

I 13:38:00 Optimal L0 Data Zone Capacity: 1,913,760

I 13:38:00 Optimal L0 Data Zone Method: Copied From Original Disc

I 13:39:01 Set L0 Data Zone Capacity Succeeded!

I 13:39:02 Filling Buffer... (40 MB)

I 13:39:03 Writing LeadIn...

I 13:39:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 13:39:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 13:39:07 Writing Layer 0... (LBA: 0 - 1913759)

I 13:51:08 Writing Layer 1... (LBA: 1913760 - 3827487)

I 14:03:26 Synchronising Cache...

I 14:03:32 Closing Track...

I 14:03:39 Finalising Disc...

I 14:04:20 Exporting Graph Data...

I 14:04:20 Graph Data File: C:\Users\Kenneth\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084D_TS01_THURSDAY-SEPTEMBER-29-2011_1-37_PM_MKM-003-00_4x.ibg

I 14:04:20 Export Successfully Completed!

I 14:04:20 Operation Successfully Completed! - Duration: 00:26:20

I 14:04:20 Average Write Rate: 5,250 KB/s (3.8x) - Maximum Write Rate: 5,697 KB/s (4.1x)

I 14:04:20 Cycling Tray before Verify...

W 14:04:36 Waiting for device to become ready...

I 14:04:50 Device Ready!

I 14:04:51 Operation Started!

I 14:04:51 Source Device: [0:0:0] TSSTcorp CDDVDW SE-S084D TS01 (F:) (USB)

I 14:04:51 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x)

I 14:04:51 Image File: C:\Users\Kenneth\Desktop\iso\complex-deadisland.dvd

I 14:04:51 Image File Sectors: 3,827,488 (MODE1/2048)

I 14:04:51 Image File Size: 7,838,695,424 bytes

I 14:04:51 Image File Volume Identifier: DVD_ROM

I 14:04:51 Image File Volume Set Identifier: d68a0000MS UDFBridge

I 14:04:51 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 14:04:51 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 14:04:51 Image File File System(s): ISO9660, UDF (1.50)

I 14:04:51 Read Speed (Data/Audio): MAX / MAX

I 14:04:51 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 14:04:51 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 14:04:51 Verifying Layer 0... (LBA: 0 - 1913759)

I 14:13:14 Verifying Layer 1... (LBA: 1913760 - 3827487)

W 14:13:32 Failed to Read Sector 1930416 - Reason: L-EC Uncorrectable Error

W 14:17:29 Failed to Read Sector 1930416 - Reason: L-EC Uncorrectable Error

W 14:17:51 Failed to Read Sector 1936514 - Reason: L-EC Uncorrectable Error

W 14:17:53 Failed to Read Sector 1936514 - Reason: L-EC Uncorrectable Error

W 14:18:07 Failed to Read Sector 1937392 - Reason: L-EC Uncorrectable Error

W 14:18:10 Failed to Read Sector 1937392 - Reason: L-EC Uncorrectable Error

W 14:18:29 Failed to Read Sector 1947363 - Reason: L-EC Uncorrectable Error

E 14:18:31 Failed to Read Sector 1947363 - Reason: L-EC Uncorrectable Error

E 14:18:31 Failed to Verify Sectors!

I 14:18:31 Exporting Graph Data...

I 14:18:31 Graph Data File: C:\Users\Kenneth\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084D_TS01_THURSDAY-SEPTEMBER-29-2011_1-37_PM_MKM-003-00_4x.ibg

I 14:18:31 Export Successfully Completed!

E 14:18:31 Operation Failed! - Duration: 00:13:39

I 14:18:31 Average Verify Rate: 4,755 KB/s (3.4x) - Maximum Verify Rate: 11,122 KB/s (8.0x)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.