Device Not Ready (No Reference Point Found)

[caioco]

So I am trying my best to burn some Bluray discs from an ISO file. It worked once, using ImgBurn but hasn't since. Every time since then I keep getting the message "Device Not Ready (No Reference Point Found). I'm using a Kanguru external Blu-ray disc burner with its approved BD-R disc type, single layer, 25GB by Maxell. Please help! This is beyond frustrating.

 

This is what is coming up in the ImgBurn Log:

W 10:37:49 Device Arrival Detected!

I 10:37:49 Searching for SCSI / ATAPI devices...

I 10:37:49 -> Drive 1 - Info: MATSHITA BD-CMB UJ141ES 1.00 (E:) (ATAPI)

I 10:37:49 -> Drive 2 - Info: TQXY PQ709AR 3.5Z (G:) (SCSI)

I 10:37:49 -> Drive 3 - Info: Optiarc BD RW BD-5300S 1.03 (H:) (USB)

I 10:37:49 Found 1 BD-ROM/HD DVD-ROM, 1 BD-ROM/DVD±RW and 1 BD-RE!

[LIGHTNING UK!]

Try again after updating to the latest firmware.

 

http://www.firmwarehq.com/Optiarc/BD-5300S/files.html

 

This is a drive/firmware/media combo issue and nothing to do with ImgBurn.

[caioco]

Thank you for advising me!

 

So I updated it, restarted the computer, got the notice that it was installed and then the same issue. Any other suggestions?

 

 

Try again after updating to the latest firmware.

 

http://www.firmwarehq.com/Optiarc/BD-5300S/files.html

 

This is a drive/firmware/media combo issue and nothing to do with ImgBurn.

[LIGHTNING UK!]

If your drive can't initialise those discs then you'll have to try some others.

 

If it fails with everything you should consider it faulty and get a new drive.