Create Bluray image file from disc

[zandar]

I have a Bluray video disc I created in Adobe Encore, it has about 5 GB of movies on it, yet the image is the exact size of the BD-RE (Source Media Size: 24,219,484,160 bytes----This is incorrect)

 

When I realized it was creating a disc image that was not the correct size, I aborted the Image write.

 

Why is it not creating a disc image that reflects the actual amount of data on the disc (the disc image should be around 5 GB in size)? What is up? This disc has only been used once.

 

 

I 11:54:09 ImgBurn Version 2.5.6.0 started!

I 11:54:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 11:54:09 Total Physical Memory: 3,407,336 KB - Available: 2,207,460 KB

I 11:54:09 Initialising SPTI...

I 11:54:09 Searching for SCSI / ATAPI devices...

I 11:54:09 -> Drive 1 - Info: HL-DT-ST BD-RE WH10LS30 1.00-07 (E:) (ATA)

I 11:54:10 -> Drive 2 - Info: PIONEER DVD-RW DVR-110D 1.41 (D:) (ATA)

I 11:54:10 Found 1 DVD±RW and 1 BD-RE!

I 11:59:06 Operation Started!

I 11:59:06 Source Device: [4:0:0] HL-DT-ST BD-RE WH10LS30 1.00 (E:) (ATA)

I 11:59:06 Source Media Type: BD-RE (Disc ID: VERBAT-IM0-000)

I 11:59:06 Source Media Supported Write Speeds: 2.4x

I 11:59:06 Source Media Sectors: 11,825,920

I 11:59:06 Source Media Size: 24,219,484,160 bytes

I 11:59:06 Source Media Volume Identifier: Untitled Project

I 11:59:06 Source Media Volume Set Identifier: b684aa77Untitled Project

I 11:59:06 Source Media Application Identifier: Sonic Solutions

I 11:59:06 Source Media Implementation Identifier: AS_Storage 4.20.13.0

I 11:59:06 Source Media File System(s): UDF (2.50)

I 11:59:06 Read Speed (Data/Audio): MAX / 8x

I 11:59:06 Hardware Read Error Retries: 10

I 11:59:06 Destination File: C:\Documents and Settings\myname\Desktop\Originals_DO NOT DELETE\movies\AfterEffectsClass.iso

I 11:59:06 Destination Free Space: 30,524,137,472 Bytes (29,808,728.00 KB) (29,110.09 MB) (28.43 GB)

I 11:59:06 Destination File System: NTFS

I 11:59:06 File Splitting: Auto

I 11:59:08 Reading Session 1 of 1... (1 Track, LBA: 0 - 11826175)

I 11:59:08 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 11826175)

I 11:59:08 Reading File System Area of Track 1... (LBA: 0 - 11825919)

I 12:08:55 Abort Request Acknowledged

 

--Thanks

Edited October 18, 2011 by zandar

[LIGHTNING UK!]

Because that's how BD-RE work.

 

There's no way to find out how much you've burnt to it because the entire disc looks burnt.

 

ImgBurn tries to just read the file system area - hence this...

 

I 11:59:08 Reading File System Area of Track 1... (LBA: 0 - 11825919)

 

... but your burning tool has set the size to what's pretty much the full size of the disc.

 

Use Build mode instead and point it at E:\.

[zandar]

Use Build mode instead and point it at E:\.

 

Can you explain this further?

 

--Thanks

[LIGHTNING UK!]

Load the program, go into Build mode (Create image file from files/folder), add E:\ to the source box.

 

That's pretty much it!