Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

[nooneyouknow]

I'm trying to burn an image and am getting this error.

 

I 20:42:46 ImgBurn Version 2.5.6.0 started!

I 20:42:46 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 20:42:46 Total Physical Memory: 982,256 KB - Available: 307,512 KB

I 20:42:46 Initialising SPTI...

I 20:42:46 Searching for SCSI / ATAPI devices...

I 20:42:47 -> Drive 1 - Info: HL-DT-ST CD-RW GCE-8526B 1.04 (D:) (ATA)

I 20:42:47 -> Drive 2 - Info: HL-DT-ST DVD-RAM GH22NP21 1.00-10 (F:) (ATA)

I 20:42:47 Found 1 CD-RW and 1 DVD±RW/RAM!

W 20:44:05 User accepted disc space warning and is attempting to truncate!

I 20:44:05 Operation Started!

I 20:44:05 Source File: G:\..\blah.dvd

I 20:44:05 Source File Sectors: 4,267,015 (MODE1/2048)

I 20:44:05 Source File Size: 8,738,846,720 bytes

I 20:44:05 Source File Volume Identifier: DVD_ROM

I 20:44:05 Source File Volume Set Identifier: cd690000MS UDFBridge

I 20:44:05 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:44:05 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:44:05 Source File File System(s): ISO9660, UDF (1.50)

I 20:44:06 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GH22NP21 1.00 (F:) (ATA)

I 20:44:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 20:44:06 Destination Media Supported Write Speeds: 4x, 6x, 8x

I 20:44:07 Destination Media Sectors: 4,173,824

I 20:44:07 Write Mode: DVD

I 20:44:07 Write Type: DAO

I 20:44:07 Write Speed: 4x

I 20:44:07 Link Size: Auto

I 20:44:07 Lock Volume: Yes

I 20:44:07 Test Mode: No

I 20:44:07 OPC: No

I 20:44:07 BURN-Proof: Enabled

I 20:44:07 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 20:44:07 Book Type Setting: DVD-ROM

W 20:44:08 Optimal layer break position exceeds L0 capacity.

W 20:44:08 Optimal L0 Sectors: 2,133,520

W 20:44:08 Maximum L0 Sectors: 2,086,912

I 20:44:08 Optimal L0 Data Zone Capacity: 2,133,520

I 20:44:08 Optimal L0 Data Zone Method: Copied From Original Disc

W 20:44:08 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

W 20:44:11 Retrying (1)...

W 20:44:11 Retry Failed - Reason: Invalid Field in CDB

W 20:44:12 Retrying (2)...

W 20:44:12 Retry Failed - Reason: Invalid Field in CDB

E 20:45:53 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

E 20:45:53 Operation Failed! - Duration: 00:01:48

I 20:45:53 Average Write Rate: N/A - Maximum Write Rate: N/A

[LIGHTNING UK!]

Technically, this is a bug in the firmware of your drive.

 

It should be returning 'Invalid Field in Parameter List' there and not 'Invalid Field in CDB'.

 

Either way, you can just ignore the error.

 

You're getting it because the layer break position you're trying to use is beyond the maximum one possible.

[nooneyouknow]

Technically, this is a bug in the firmware of your drive.

 

I did a search for a firmware update for my drive and couldn't come up with anything on firewarehq through imgburn.

[LIGHTNING UK!]

It's a discontinued drive now so I doubt you'll see anything from LG for it.