hades6903 Posted October 22, 2011 Posted October 22, 2011 Ok so heres the deal: I am trying to backup xgd3 xbox360 games. I haven't had this problem before and have done this for quite some time. Switched from memorex to Verbatim Cleaned the drive and the lens Took a lot of the power off my computer so I do not have a lot of things hooked up drawing power. I am still getting the, W 00:48:40 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB, error everytime. Please help! I 00:47:51 ImgBurn Version 2.5.6.0 started! I 00:47:51 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1) I 00:47:51 Total Physical Memory: 3,143,832 KB - Available: 1,977,708 KB I 00:47:51 Initialising SPTI... I 00:47:51 Searching for SCSI / ATAPI devices... I 00:47:51 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 2.00-09 (F:) (ATA) I 00:47:51 -> Drive 2 - Info: TSSTcorp DVD-ROM SH-D162D SB00 (E:) (ATA) I 00:47:51 Found 1 DVD-ROM and 1 DVD±RW/RAM! W 00:48:39 User accepted disc space warning and is attempting to truncate! I 00:48:39 Operation Started! I 00:48:39 Source File: I:\Xbox 360\Dark Souls.dvd I 00:48:39 Source File Sectors: 4,267,015 (MODE1/2048) I 00:48:39 Source File Size: 8,738,846,720 bytes I 00:48:39 Source File Volume Identifier: DVD_ROM I 00:48:39 Source File Volume Set Identifier: c4480000MS UDFBridge I 00:48:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:48:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 00:48:39 Source File File System(s): ISO9660, UDF (1.50) I 00:48:39 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (ATA) I 00:48:39 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) I 00:48:39 Destination Media Supported Write Speeds: 4x I 00:48:39 Destination Media Sectors: 4,173,824 I 00:48:39 Write Mode: DVD I 00:48:39 Write Type: DAO I 00:48:39 Write Speed: 2.4x I 00:48:40 Link Size: Auto I 00:48:40 Lock Volume: Yes I 00:48:40 Test Mode: No I 00:48:40 OPC: No I 00:48:40 BURN-Proof: Enabled W 00:48:40 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) W 00:48:40 The drive only supports writing these discs at 4x. I 00:48:40 Book Type Setting: DVD-ROM W 00:48:40 Optimal layer break position exceeds L0 capacity. W 00:48:40 Optimal L0 Sectors: 2,133,520 W 00:48:40 Maximum L0 Sectors: 2,086,912 I 00:48:40 Optimal L0 Data Zone Capacity: 2,133,520 I 00:48:40 Optimal L0 Data Zone Method: Copied From Original Disc W 00:48:40 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB E 00:48:42 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB E 00:48:42 Operation Failed! - Duration: 00:00:02 I 00:48:42 Average Write Rate: N/A - Maximum Write Rate: N/A
LIGHTNING UK! Posted October 22, 2011 Posted October 22, 2011 http://forum.imgburn.com/index.php?showtopic=18881
hades6903 Posted October 22, 2011 Author Posted October 22, 2011 Thanks, that is one of the ones that I had not read, but then I may be having a different problem. I have ignored the error a couple of times but then when the backup is done it just gives me a black screen and then goes back to the dashboard temporarily. Any ideas?
LIGHTNING UK! Posted October 22, 2011 Posted October 22, 2011 Sorry but playback issues (especially with games) are not really our concern. If the disc burnt and verified ok, ImgBurn did its job (well, the drive did). You should have a read around at some xbox sites/forums, new developments are happening all the time.
Recommended Posts