theoo Posted October 23, 2011 Posted October 23, 2011 I couldn't burn this game. Using Verbatim DVD+R DL. This is the log. Can anyone help me? I 10:34:49 ImgBurn Version 2.5.6.0 started! I 10:34:49 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 10:34:49 Total Physical Memory: 4.189.104 KB - Available: 3.205.556 KB I 10:34:49 Initialising SPTI... I 10:34:49 Searching for SCSI / ATAPI devices... I 10:34:49 -> Drive 1 - Info: HL-DT-ST DVDRAM GU10N AP04 (D:) (ATA) I 10:34:49 Found 1 DVD±RW/RAM! W 10:38:51 User accepted disc space warning and is attempting to truncate! I 10:38:51 Operation Started! I 10:38:51 Source File: C:\Users\Gülgün\Downloads\2011_M3S\driver.dvd I 10:38:51 Source File Sectors: 4.267.015 (MODE1/2048) I 10:38:51 Source File Size: 8.738.846.720 bytes I 10:38:51 Source File Volume Identifier: DVD_ROM I 10:38:51 Source File Volume Set Identifier: cd690000MS UDFBridge I 10:38:51 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:38:51 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:38:51 Source File File System(s): ISO9660; UDF (1.50) I 10:38:51 Destination Device: [1:0:0] HL-DT-ST DVDRAM GU10N AP04 (D:) (ATA) I 10:38:51 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 10:38:51 Destination Media Supported Write Speeds: 2,4x; 4x; 6x I 10:38:51 Destination Media Sectors: 4.173.824 I 10:38:51 Write Mode: DVD I 10:38:51 Write Type: DAO I 10:38:51 Write Speed: MAX I 10:38:51 Link Size: Auto I 10:38:51 Lock Volume: Yes I 10:38:51 Test Mode: No I 10:38:51 OPC: No I 10:38:51 BURN-Proof: Enabled I 10:38:51 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x) I 10:38:51 Book Type Setting: N/A (Reason: Invalid Command Operation Code) W 10:38:51 Optimal layer break position exceeds L0 capacity. W 10:38:51 Optimal L0 Sectors: 2.133.520 W 10:38:51 Maximum L0 Sectors: 2.086.912 I 10:38:51 Optimal L0 Data Zone Capacity: 2.133.520 I 10:38:51 Optimal L0 Data Zone Method: Copied From Original Disc W 10:38:51 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 10:38:52 Filling Buffer... (40 MB) I 10:38:53 Writing LeadIn... I 10:40:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 10:40:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 10:40:37 Writing Layer 0... (LBA: 0 - 2086911) W 11:00:49 Failed to Write Sectors 1937152 - 1937183 - Reason: Focus Servo Error W 11:00:50 Retrying (1 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (2 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (3 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (4 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (5 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (6 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (7 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (8 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (9 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (10 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (11 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (12 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (13 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (14 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (15 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (16 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (17 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (18 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (19 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write W 11:00:50 Retrying (20 of 20)... W 11:00:50 Retry Failed - Reason: Invalid Address For Write E 11:01:41 Failed to Write Sectors 1937152 - 1937183 - Reason: Focus Servo Error E 11:01:41 Next Writable Address: 1936944 I 11:01:41 Synchronising Cache... I 11:01:48 Closing Track... I 11:01:59 Finalising Disc... E 11:24:49 Failed to Write Image! I 11:24:49 Exporting Graph Data... I 11:24:49 Graph Data File: C:\Users\Gülgün\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GU10N_AP04_23-EKIM-2011-PAZAR_10-38_MKM-003-00_MAX.ibg I 11:24:50 Export Successfully Completed! E 11:24:50 Operation Failed! - Duration: 00:45:58 I 11:24:50 Average Write Rate: 3.067 KB/s (2.2x) - Maximum Write Rate: 3.377 KB/s (2.4x) ImgBurn.log
LIGHTNING UK! Posted October 23, 2011 Posted October 23, 2011 Try the other supported write speeds - i.e. 2.4x and 4x.
theoo Posted October 23, 2011 Author Posted October 23, 2011 selected 4x as write speed. same result. I 22:26:48 ImgBurn Version 2.5.6.0 started! I 22:26:48 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 22:26:48 Total Physical Memory: 4.189.104 KB - Available: 2.666.060 KB I 22:26:48 Initialising SPTI... I 22:26:48 Searching for SCSI / ATAPI devices... I 22:26:49 -> Drive 1 - Info: HL-DT-ST DVDRAM GU10N AP04 (D:) (ATA) I 22:26:49 Found 1 DVD±RW/RAM! W 22:27:05 User accepted disc space warning and is attempting to truncate! I 22:27:06 Operation Started! I 22:27:06 Source File: C:\Users\Gülgün\Downloads\2011_M3S\driver.dvd I 22:27:06 Source File Sectors: 4.267.015 (MODE1/2048) I 22:27:06 Source File Size: 8.738.846.720 bytes I 22:27:06 Source File Volume Identifier: DVD_ROM I 22:27:06 Source File Volume Set Identifier: cd690000MS UDFBridge I 22:27:06 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:27:06 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 22:27:06 Source File File System(s): ISO9660; UDF (1.50) I 22:27:06 Destination Device: [1:0:0] HL-DT-ST DVDRAM GU10N AP04 (D:) (ATA) I 22:27:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 22:27:06 Destination Media Supported Write Speeds: 2,4x; 4x; 6x I 22:27:06 Destination Media Sectors: 4.173.824 I 22:27:06 Write Mode: DVD I 22:27:06 Write Type: DAO I 22:27:06 Write Speed: 4x I 22:27:06 Link Size: Auto I 22:27:06 Lock Volume: Yes I 22:27:06 Test Mode: No I 22:27:06 OPC: No I 22:27:06 BURN-Proof: Enabled I 22:27:06 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 22:27:06 Book Type Setting: N/A (Reason: Invalid Command Operation Code) W 22:27:06 Optimal layer break position exceeds L0 capacity. W 22:27:06 Optimal L0 Sectors: 2.133.520 W 22:27:06 Maximum L0 Sectors: 2.086.912 I 22:27:06 Optimal L0 Data Zone Capacity: 2.133.520 I 22:27:06 Optimal L0 Data Zone Method: Copied From Original Disc W 22:27:06 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List I 22:27:06 Filling Buffer... (40 MB) I 22:27:07 Writing LeadIn... I 22:28:53 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 22:28:53 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 22:28:53 Writing Layer 0... (LBA: 0 - 2086911) W 22:48:46 Failed to Write Sectors 1909952 - 1909983 - Reason: Focus Servo Error W 22:48:46 Retrying (1 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (2 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (3 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (4 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (5 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (6 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (7 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (8 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (9 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (10 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (11 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (12 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (13 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (14 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (15 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (16 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (17 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (18 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:46 Retrying (19 of 20)... W 22:48:46 Retry Failed - Reason: Invalid Address For Write W 22:48:47 Retrying (20 of 20)... W 22:48:47 Retry Failed - Reason: Invalid Address For Write E 22:48:50 Failed to Write Sectors 1909952 - 1909983 - Reason: Focus Servo Error E 22:48:50 Next Writable Address: 1909744 I 22:48:50 Synchronising Cache... I 22:48:53 Closing Track... I 22:49:03 Finalising Disc... E 23:11:56 Failed to Write Image! I 23:11:56 Exporting Graph Data... I 23:11:56 Graph Data File: C:\Users\Gülgün\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GU10N_AP04_23-EKIM-2011-PAZAR_22-27_MKM-003-00_4x.ibg I 23:11:56 Export Successfully Completed! E 23:11:56 Operation Failed! - Duration: 00:44:50 I 23:11:56 Average Write Rate: 3.191 KB/s (2.3x) - Maximum Write Rate: 3.374 KB/s (2.4x) ImgBurn1.log
LIGHTNING UK! Posted October 23, 2011 Posted October 23, 2011 Try a different spindle of Verbatims. If they also fail, try cleaning your drive. If discs from both spindles still fail after that, buy a new drive.
theoo Posted October 23, 2011 Author Posted October 23, 2011 I ve used a DVD Lens Cleaner disk and checked Verify box when burning. It s working now. Thanks for help
Recommended Posts