trigrous Posted October 28, 2011 Posted October 28, 2011 Hello, I've been trying to burn Fifa 12 and I've used Verbatim DVD-R cds for this. But before the burning start I get this: I 21:36:45 ImgBurn Version 2.5.5.0 started! I 21:36:45 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 21:36:45 Total Physical Memory: 2 095 180 KB - Available: 1 669 204 KB W 21:36:45 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 21:36:45 Initialising SPTI... I 21:36:45 Searching for SCSI / ATAPI devices... I 21:36:45 -> Drive 1 - Info: PHILIPS DVD+-RW DVD8631 CD21 (D:) (ATA) I 21:36:45 -> Drive 2 - Info: OPC ABS96Z01AJ 1.04 (F:) (SCSI) I 21:36:45 Found 1 DVD±RW and 1 BD-ROM! I 21:37:00 Operation Started! I 21:37:00 Source File: C:\Documents and Settings\2011\Skrivbord\FIFA12\FIFA12.PAL.NORDIC.sp4d3x\FIFA12.PAL.NORDIC.sp4d3x.dvd I 21:37:00 Source File Sectors: 3 827 488 (MODE1/2048) I 21:37:00 Source File Size: 7 838 695 424 bytes I 21:37:00 Source File Volume Identifier: 13599 I 21:37:00 Source File Volume Set Identifier: ceee8000MS UDFBridge I 21:37:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:37:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:37:00 Source File File System(s): ISO9660; UDF (1.50) I 21:37:00 Destination Device: [0:0:0] PHILIPS DVD+-RW DVD8631 CD21 (D:) (ATA) I 21:37:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x) I 21:37:00 Destination Media Sectors: 4 173 824 I 21:37:00 Write Mode: DVD I 21:37:00 Write Type: DAO I 21:37:00 Write Speed: 2,4x I 21:37:00 Link Size: Auto I 21:37:00 Lock Volume: Yes I 21:37:00 Test Mode: No I 21:37:00 OPC: No I 21:37:00 BURN-Proof: Enabled I 21:37:00 Write Speed Successfully Set! - Effective: 3 324 KB/s (2,4x) I 21:37:00 Optimal L0 Data Zone Capacity: 1 913 760 I 21:37:00 Optimal L0 Data Zone Method: Copied From Original Disc I 21:37:00 Set L0 Data Zone Capacity Succeeded! I 21:37:01 Filling Buffer... (40 MB) I 21:37:01 Writing LeadIn... W 21:37:06 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 21:37:06 Retrying (1 of 20)... W 21:37:07 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:07 Retrying (2 of 20)... W 21:37:07 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:07 Retrying (3 of 20)... W 21:37:07 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:07 Retrying (4 of 20)... W 21:37:07 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:07 Retrying (5 of 20)... W 21:37:07 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:07 Retrying (6 of 20)... W 21:37:08 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:08 Retrying (7 of 20)... W 21:37:08 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:08 Retrying (8 of 20)... W 21:37:08 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:08 Retrying (9 of 20)... W 21:37:08 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:08 Retrying (10 of 20)... W 21:37:08 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:08 Retrying (11 of 20)... W 21:37:09 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:09 Retrying (12 of 20)... W 21:37:09 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:09 Retrying (13 of 20)... W 21:37:09 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:09 Retrying (14 of 20)... W 21:37:09 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:09 Retrying (15 of 20)... W 21:37:09 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:09 Retrying (16 of 20)... W 21:37:10 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:10 Retrying (17 of 20)... W 21:37:10 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:10 Retrying (18 of 20)... W 21:37:10 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:10 Retrying (19 of 20)... W 21:37:10 Retry Failed - Reason: Power Calibration Area Is Full W 21:37:10 Retrying (20 of 20)... W 21:37:10 Retry Failed - Reason: Power Calibration Area Is Full E 21:37:12 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full I 21:37:12 Synchronising Cache... W 21:37:15 User opted to skip the 'Close Track/Session/Disc' functions. E 21:37:15 Failed to Write Image! E 21:37:15 Operation Failed! - Duration: 00:00:14 I 21:37:15 Average Write Rate: N/A - Maximum Write Rate: N/A Please Help Me!
mmalves Posted October 28, 2011 Posted October 28, 2011 Your burner is too old and doesn't have support for those Verbatim 8x DVD+R DL blanks. You could try flashing it to the latest firmware version but I doubt it'll add support (look at the release date). So your options are try and get Verbatim 2.4x (MKM-001-00 dye / MID) DVD+R DL blanks or get a new burner (best option and inexpensive too), something like a Optiarc AD-7260S / AD-7280S or perhaps a Lite-On iHAS124 B (both are SATA burners so check if you have a spare SATA port beforehand). Oh, and update your ImgBurn too.
trigrous Posted October 28, 2011 Author Posted October 28, 2011 Your burner is too old and doesn't have support for those Verbatim 8x DVD+R DL blanks. You could try flashing it to the latest firmware version but I doubt it'll add support (look at the release date). So your options are try and get Verbatim 2.4x (MKM-001-00 dye / MID) DVD+R DL blanks or get a new burner (best option and inexpensive too), something like a Optiarc AD-7260S / AD-7280S or perhaps a Lite-On iHAS124 B (both are SATA burners so check if you have a spare SATA port beforehand). Oh, and update your ImgBurn too. Thanks for the fast answer I tried updating but it didn't work so I think I have to get a new burner.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now