QfG Posted October 29, 2011 Posted October 29, 2011 (edited) Hello Support, i have a Problem with Verfying after the burn process. I use a LiteOn iHAS624 Burner with eXtreme Burning MAX Firmware. Now i burn a XGD3 Game without problems, but the Tool cannot verified. Here is the LOG what i mean : I 17:20:15 Image File Sectors: 4.267.015 (MODE1/2048) I 17:20:15 Image File Size: 8.738.846.720 bytes I 17:20:15 Image File Volume Identifier: DVD_ROM I 17:20:15 Image File Volume Set Identifier: a2ff4000MS UDFBridge I 17:20:15 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:20:15 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 17:20:15 Image File File System(s): ISO9660; UDF (1.50) I 17:20:15 Read Speed (Data/Audio): MAX / MAX I 17:20:17 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 17:20:17 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 17:20:17 Verifying Layer 0... (LBA: 0 - 2133519) W 17:20:18 Waiting for device to become ready... I 17:20:19 Device ready! I 17:20:19 Verifying Sectors... W 17:20:19 Failed to Read Sector 1408 - Reason: Logical Unit is in process of becoming ready W 17:20:19 Sector 1408 maps to File: \VIDEO_TS\VTS_01_1.VOB W 17:20:51 Failed to Read Sector 1408 - Reason: Logical Unit is in process of becoming ready W 17:20:51 Sector 1408 maps to File: \VIDEO_TS\VTS_01_1.VOB W 17:20:51 Failed to Read Sector 1409 - Reason: Logical Unit is in process of becoming ready W 17:20:51 Sector 1409 maps to File: \VIDEO_TS\VTS_01_1.VOB W 17:20:52 Failed to Read Sector 1409 - Reason: Logical Unit is in process of becoming ready W 17:20:52 Sector 1409 maps to File: \VIDEO_TS\VTS_01_1.VOB W 17:20:52 Failed to Read Sector 1410 - Reason: Logical Unit is in process of becoming ready W 17:20:52 Sector 1410 maps to File: \VIDEO_TS\VTS_01_1.VOB W 17:20:54 Retrying (1)... W 17:20:54 Retry Failed - Reason: Logical Unit is in process of becoming ready W 17:20:55 Retrying (2)... W 17:20:55 Retry Failed - Reason: Logical Unit is in process of becoming ready W 17:20:55 Retrying (3)... W 17:20:55 Retry Failed - Reason: Logical Unit is in process of becoming ready E 17:21:16 Failed to Read Sector 1410 - Reason: Logical Unit is in process of becoming ready E 17:21:16 Sector 1410 maps to File: \VIDEO_TS\VTS_01_1.VOB E 17:21:16 Failed to Verify Sectors! I 17:21:18 Exporting Graph Data... I 17:21:18 Graph Data File: C:\Users\n3mes1s\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS624_B_GL29_SAMSTAG-29-OKTOBER-2011_16-34_MKM-003-00_2,4x.ibg I 17:21:18 Export Successfully Completed! E 17:21:18 Operation Failed! - Duration: 00:01:01 I 17:21:18 Average Verify Rate: 47 KB/s (0.0x) - Maximum Verify Rate: 47 KB/s (0.0x) Can you help me to terminate this Error ? It seems so, that the Autoplay running after the burn process, but i cannot see anything ( no Media Player starts, for example). I cannot use KProbe, too. I must open and close the Burner, then i can use KProbe. Thanks, n3mes1s Edited October 29, 2011 by QfG
LIGHTNING UK! Posted October 29, 2011 Posted October 29, 2011 I've seen this happen when the tray is prevented from opening fully as it's cycled between write and verify. It must be some sort of firmware bug.
QfG Posted October 29, 2011 Author Posted October 29, 2011 Ok, thank you for your Answer. I will flash my Drive again and testing a new one. Maybe, i use EMSISOFT Antivir, can this take acces of my burning drive, so that this error will come ?
LIGHTNING UK! Posted October 29, 2011 Posted October 29, 2011 I was talking about something physically stopping the tray. Like where some cases have a flap over the front that hides the drives and therefore blocks the tray from ejecting fully.
QfG Posted October 31, 2011 Author Posted October 31, 2011 LOL, This is the suggestion of my problem, the dvd tray hangs a little bit, now it works fine, Thank you very much.
Recommended Posts