matt6950 Posted October 31, 2011 Posted October 31, 2011 (edited) hello guys every iso i burn with the ihas124b i allways get falied to read from file ******* reason:the parameter is incorrect the iso im trying to but in on a 3tb external hard drive and when i try to burn it gets to about 94% it then comes up saying falied to read from file ******* reason:the parameter is incorrect would you like to cancel or retry how can i stop this from doing this on every iso i burn i belive this is the correct log I 23:50:54 ImgBurn Version 2.5.6.0 started! I 23:50:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 23:50:54 Total Physical Memory: 3,405,352 KB - Available: 2,771,056 KB I 23:50:54 Initialising SPTI... I 23:50:54 Searching for SCSI / ATAPI devices... I 23:50:54 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (D:) (ATA) I 23:50:54 Found 1 DVD±RW/RAM! I 23:51:39 Operation Started! I 23:51:39 Source File: E:\megaupload default download file\matt6950 Goldeneye_007_Reloaded.STRANGE\s-ger.dvd I 23:51:39 Source File Sectors: 4,267,015 (MODE1/2048) I 23:51:39 Source File Size: 8,738,846,720 bytes I 23:51:39 Source File Volume Identifier: DVD_ROM I 23:51:39 Source File Volume Set Identifier: 64ce0000MS UDFBridge I 23:51:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 23:51:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 23:51:39 Source File File System(s): ISO9660, UDF (1.50) I 23:51:39 Destination Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 23:51:39 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 23:51:39 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 23:51:39 Destination Media Sectors: 4,267,040 I 23:51:39 Write Mode: DVD I 23:51:39 Write Type: DAO I 23:51:39 Write Speed: 2.4x I 23:51:39 Link Size: Auto I 23:51:39 Lock Volume: Yes I 23:51:39 Test Mode: No I 23:51:39 OPC: Yes I 23:51:39 BURN-Proof: Enabled I 23:51:39 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 23:51:39 Book Type Setting: DVD-ROM I 23:51:39 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 23:52:13 Optimal L0 Data Zone Capacity: 2,133,520 I 23:52:13 Optimal L0 Data Zone Method: Copied From Original Disc I 23:52:13 Set L0 Data Zone Capacity Succeeded! I 23:52:13 Filling Buffer... (40 MB) I 23:52:14 Writing LeadIn... I 23:52:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 23:52:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 23:52:17 Writing Layer 0... (LBA: 0 - 2133519) I 00:14:11 Writing Layer 1... (LBA: 2133520 - 4267014) I 00:39:14 Synchronising Cache... I 00:39:18 Closing Track... I 00:39:19 Finalising Disc... I 00:40:11 Exporting Graph Data... I 00:40:11 Graph Data File: C:\Documents and Settings\matt\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_30-OCTOBER-2011_23-51_MKM-003-00_2.4x.ibg I 00:40:11 Export Successfully Completed! I 00:40:11 Operation Successfully Completed! - Duration: 00:48:31 I 00:40:11 Average Write Rate: 3,030 KB/s (2.2x) - Maximum Write Rate: 3,387 KB/s (2.4x) I 00:40:11 Cycling Tray before Verify... W 00:40:18 Waiting for device to become ready... I 00:40:32 Device Ready! I 00:40:33 Operation Started! I 00:40:33 Source Device: [3:0:0] ATAPI iHAS124 B AL0S (D:) (ATA) I 00:40:33 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 00:40:33 Source Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 00:40:33 Image File: E:\megaupload default download file\matt6950 Goldeneye_007_Reloaded.STRANGE\s-ger.dvd I 00:40:33 Image File Sectors: 4,267,015 (MODE1/2048) I 00:40:33 Image File Size: 8,738,846,720 bytes I 00:40:33 Image File Volume Identifier: DVD_ROM I 00:40:33 Image File Volume Set Identifier: 64ce0000MS UDFBridge I 00:40:33 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:40:33 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 00:40:33 Image File File System(s): ISO9660, UDF (1.50) I 00:40:33 Read Speed (Data/Audio): MAX / MAX I 00:40:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 00:40:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 00:40:34 Verifying Layer 0... (LBA: 0 - 2133519) I 00:49:47 Verifying Layer 1... (LBA: 2133520 - 4267014) I 00:59:15 Exporting Graph Data... I 00:59:15 Graph Data File: C:\Documents and Settings\matt\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_30-OCTOBER-2011_23-51_MKM-003-00_2.4x.ibg I 00:59:15 Export Successfully Completed! I 00:59:15 Operation Successfully Completed! - Duration: 00:18:36 I 00:59:15 Average Verify Rate: 7,653 KB/s (5.5x) - Maximum Verify Rate: 11,263 KB/s (8.1x) I 00:59:17 Close Request Acknowledged I 00:59:17 Closing Down... I 00:59:18 Shutting down SPTI... I 00:59:18 ImgBurn closed! Edited October 31, 2011 by matt6950
mmalves Posted October 31, 2011 Posted October 31, 2011 You can find previous logs in ImgBurn's Help menu.
LIGHTNING UK! Posted October 31, 2011 Posted October 31, 2011 A 3TB drive you say... well this could be related to the 'Advanced Format' used on newer drives. The physical sectors are 4096 bytes in size rather than 512 bytes. I have a few 'Advanced Format' drives but all mine are 4K physical and 512 byte logical (via some sort of emulation). I'm guessing yours is 4K phyiscal and 4K logical - and that's why you're getting the error. I'd love to get a 4K logical drive for testing but they're impossible to track down! As it happens, I did a bit of tweaking yesterday to the code in question and it should fix this issue. I'll email you a version for testing if you like? Is your forum email address ok?
matt6950 Posted October 31, 2011 Author Posted October 31, 2011 A 3TB drive you say... well this could be related to the 'Advanced Format' used on newer drives. The physical sectors are 4096 bytes in size rather than 512 bytes. I have a few 'Advanced Format' drives but all mine are 4K physical and 512 byte logical (via some sort of emulation). I'm guessing yours is 4K phyiscal and 4K logical - and that's why you're getting the error. I'd love to get a 4K logical drive for testing but they're impossible to track down! As it happens, I did a bit of tweaking yesterday to the code in question and it should fix this issue. I'll email you a version for testing if you like? Is your forum email address ok? yeh that would be great forum email is fine if it helps my rive is a goflex 3tb here is a link to one http://www.maplin.co.uk/3tb-freeagent-goflex-desk-external-drive-476961?n=1&C=found&gclid=CInzgdjikawCFQEd4QodL3Gb6g (i did not pay that much)
LIGHTNING UK! Posted October 31, 2011 Posted October 31, 2011 email sent, it should be with you in 5 - 10 minutes. Out of interest, how long ago did you get the drive?
matt6950 Posted October 31, 2011 Author Posted October 31, 2011 email sent, it should be with you in 5 - 10 minutes. Out of interest, how long ago did you get the drive? abouy half a year to a year.
LIGHTNING UK! Posted October 31, 2011 Posted October 31, 2011 I think the first ones that came out would have used 4k logical sectors (max speed) but now they always emulate 512 byte ones because it means all the programs still work - and don't error out in the way you're seeing here! I'm sure in another year or 2 once all the software has caught up they'll switch back to 4k logical again (it's faster).
matt6950 Posted October 31, 2011 Author Posted October 31, 2011 I think the first ones that came out would have used 4k logical sectors (max speed) but now they always emulate 512 byte ones because it means all the programs still work - and don't error out in the way you're seeing here! I'm sure in another year or 2 once all the software has caught up they'll switch back to 4k logical again (it's faster). the fix you gave me worked!! i will burn a few more over the next few weeks and i will email you if they burn all ok
Cynthia Posted October 31, 2011 Posted October 31, 2011 Curious. Would this issue have happened on a later O/S than XP? From what I can understand it's a limitation on XP and older O/S. http://www.pcmech.com/article/4k-sector-drives-are-coming/
LIGHTNING UK! Posted October 31, 2011 Posted October 31, 2011 It would happen on any OS. For me, it's a problem with the 'CreateFile' API when using the 'FILE_FLAG_NO_BUFFERING' flag. When you disable buffering you can only read in multiples of the *logical* sector size - so reading 2048 bytes would fail on a 4K logical sector drive but work fine on a 512 byte logical sector drive. Reading 8K would work just fine on both. The bit they talk about with XP not supporting Advanced Format drives is mainly for when XP partitions them I believe. And it should only be a problem when the drive emulates 512 byte logical sectors (due to bad alignment of the primary partition). http://hothardware.com/Reviews/WDs-1TB-Caviar-Green-w-Advanced-Format-Windows-XP-Users-Pay-Attention/?page=1
Recommended Posts