I/O Errors " Failed to reserve track"

[Mosteel831]

I have absolutely no knowledge on these things and I started using this today so please have some patience with me.

this is what the program file says

I 23:03:04 ImgBurn Version 2.5.6.0 started!

I 23:03:05 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)

I 23:03:05 Total Physical Memory: 8,335,216 KB - Available: 4,811,968 KB

I 23:03:05 Initialising SPTI...

I 23:03:05 Searching for SCSI / ATAPI devices...

I 23:03:05 -> Drive 1 - Info: DTSOFT BDROM 1.05 (E:) (Virtual)

I 23:03:05 -> Drive 2 - Info: HL-DT-ST DVD+-RW GS30N A101 (D:) (ATAPI)

I 23:03:05 Found 1 DVD±RW/RAM and 1 BD-ROM!

W 23:03:44 User accepted disc space warning and is attempting to overburn!

I 23:03:45 Operation Started!

I 23:03:45 Source File: C:\Downloads\X-Men_Destiny test file\rrod-xmd\rrod-xmd.dvd

I 23:03:45 Source File Sectors: 4,267,015 (MODE1/2048)

I 23:03:45 Source File Size: 8,738,846,720 bytes

I 23:03:45 Source File Volume Identifier: DVD_ROM

I 23:03:45 Source File Volume Set Identifier: c4480000MS UDFBridge

I 23:03:45 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 23:03:45 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 23:03:45 Source File File System(s): ISO9660, UDF (1.50)

I 23:03:45 Destination Device: [0:1:0] HL-DT-ST DVD+-RW GS30N A101 (D:) (ATAPI)

I 23:03:45 Destination Media Type: DVD-R (Disc ID: RITEKF1)

I 23:03:45 Destination Media Supported Write Speeds: 4x, 8x

I 23:03:45 Destination Media Sectors: 2,298,496

I 23:03:45 Write Mode: DVD

I 23:03:45 Write Type: DAO

I 23:03:45 Write Speed: MAX

I 23:03:45 Link Size: Auto

I 23:03:45 Lock Volume: Yes

I 23:03:45 Test Mode: No

I 23:03:45 OPC: No

I 23:03:45 BURN-Proof: Enabled

I 23:03:45 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)

E 23:03:46 Failed to Reserve Track! - Reason: Invalid Field in CDB

E 23:03:47 Operation Failed! - Duration: 00:00:02

I 23:03:47 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

My friend told me to do this

1. Choose "Write image file to disc", and after loading the .dvd

file, click "Write".

 

2. ImgBurn will pop up a notice saying that there is not enough

space on the disc to burn the image, and asks if you would like to

continue anyway. Click "Yes".

 

3. Another message might pop up saying that optimal layerbreak

position exceeds L0 capacity. Click "Yes".

I stop it there because I can't even get to step 3. Help?

[mmalves]

You need to use DVD+R DL (dual layer) media.