jvimgburn Posted November 15, 2011 Posted November 15, 2011 (edited) Hi I'm trying to test a compilation (TestMode checkbox checked). I have an ISO image with DVD movie inside. Size is 4.706.598.912 bytes. I'm confused with the available space on the media. When I open ImgBurn for the first time it shows the follow information: _____________________________________ HL-DT-ST DVD-RAM GSA-H22N 1.00 (ATA) Current Profile: DVD-R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 2.297.888 Free Space: 4.706.074.624 bytes Free Time: 510:40:38 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 4x; 8x Pre-recorded Information: Manufacturer ID: TYG02 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.495.103 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11.080 KB/s (8x) - WS: 5.540 KB/s (4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11.080 KB/s (8x) - WS: 11.080 KB/s (8x) _____________________________________ If I eject and load again the same media, the information window is the follow: _____________________________________ HL-DT-ST DVD-RAM GSA-H22N 1.00 (ATA) Current Profile: DVD-R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 2.298.496 Free Space: 4.707.319.808 bytes Free Time: 510:48:46 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 4x; 8x Pre-recorded Information: Manufacturer ID: TYG02 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.495.103 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11.080 KB/s (8x) - WS: 5.540 KB/s (4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11.080 KB/s (8x) - WS: 11.080 KB/s (8x) _____________________________________ If I restart Windows (XP-SP3) and run ImgBurn again, the first window is showed (I mean, the one with less space available). If I eject and load again the same media, the information window change to more space available and always shows the same info: 4.707.319.808 bytes, no matter I eject and load again. Afterall, what is the real free space available? 4.706.074.624 or 4.707.319.808 bytes? As we can see, Free Space is greater than the file (4.707.319.808 > 4.706.598.912). But I got the follow error: I/O error ScsiStatus:0x02 Interpretation: Check Condition CDB: 53 00 00 00 00 00 23 11 20 00 Interpretation: Reserve Track - Sectors: 2.298.144 Sense Area: 70 00 05 00 00 00 00 0E 00 00 00 00 24 00 00 00 00 00 Interpretation: Invalid Field in CDB So, I have the questions below: 1 - Why I got 2 different info windows about the same media? 2 - What is the real space available to write? 3 - Why I got such error (Invalid Field in CDB) and what it means? 4 - How to fix it and test the compilation? thx Edited November 15, 2011 by jvimgburn
mmalves Posted November 15, 2011 Posted November 15, 2011 ImgBurn uses the information provided by the burner, and in your case it's the burner that's changing the amount of free sectors available between 2,297,888 and 2,298,496 (each sector holds 2,048 bytes of data). We've seen this happen before with several burners and we don't know what causes this, but it only happens with DVD-R / DVD-RW media. It's the space shown in the media information text, but you have to take into account the filesystem(s) overhead and whatnot, so the usable space is slightly less than the full disc's capacity. That's why the Build mode has the Calculator button, as it takes all that into account and gives you the straight dope on the free usable space. You received that error because you tried to burn 2,298,144 sectors of data when the burner identified the disc as having 2,297,888 sectors free. You'll have to somehow change your compilation in order to fit that disc. That, or keep cycling the drive until it recognises the disc as 2,298,496 sectors, which or may not happen at all. By the way, update your burner's firmware to the latest version (remove any disc and close the tray before running the updater then reboot the computer after the updater has finished).
jvimgburn Posted November 17, 2011 Author Posted November 17, 2011 Thank you, again, mmalves. As I said in the previous post about "How to know the disc capacity using Build Mode?", you solved all my questions. BTW, even ImgBurn refusing to burn that compilation, Nero 6 (an old one) burn it on the fly, without questions. I was migrating to ImgBurn, but after some troubles like this, I think I'll keep both, ImgBurn and the old Nero. I like very much ImgBurn and I'm impressed how this tool is very well coded (written). Congrats for all your team. There were a little delay for this post because the system (forum) did not alert me via e-mail that there would be an answer here, althought I clicked to subscribe this thread.
Recommended Posts