Jump to content

Burning problem


Recommended Posts



I'm trying to burn a DVD DL but it's crashing right at the beginning (0%). The log is the following:


I 15:25:08 ImgBurn Version started!

I 15:25:08 Microsoft Windows Vista Home Premium x64 Edition (6.0, Build 6002 : Service Pack 2)

I 15:25:08 Total Physical Memory: 4.192.428 KB - Available: 2.132.868 KB

I 15:25:08 Initialising SPTI...

I 15:25:08 Searching for SCSI / ATAPI devices...

I 15:25:08 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T50L SR04 (E:) (ATAPI)

I 15:25:08 Found 1 DVD±RW/RAM!

I 15:25:25 Operation Started!

I 15:25:25 Source File: D:\Leonardo\CADMW III\dmn-dra2.CloudShadow.dvd

I 15:25:25 Source File Sectors: 3.827.488 (MODE1/2048)

I 15:25:25 Source File Size: 7.838.695.424 bytes

I 15:25:25 Source File Volume Identifier: DVD_ROM

I 15:25:25 Source File Volume Set Identifier: d0a44000MS UDFBridge

I 15:25:25 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 15:25:25 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 15:25:25 Source File File System(s): ISO9660; UDF (1.50)

I 15:25:25 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-T50L SR04 (E:) (ATAPI)

I 15:25:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)

I 15:25:25 Destination Media Supported Write Speeds: 2,4x; 4x; 6x

I 15:25:25 Destination Media Sectors: 4.173.824

I 15:25:25 Write Mode: DVD

I 15:25:25 Write Type: DAO

I 15:25:25 Write Speed: 2,4x

I 15:25:25 Link Size: Auto

I 15:25:25 Lock Volume: Yes

I 15:25:25 Test Mode: No

I 15:25:25 OPC: No

I 15:25:25 BURN-Proof: Enabled

I 15:25:26 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x)

I 15:25:26 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

I 15:25:26 User Specified L0 Data Zone Capacity: 1.913.760

W 15:26:36 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure



I would appreciate if somebody could help me with this!

Link to comment
Share on other sites

Also try burning at 4x and 6x.


You could also try cleaning the drive with a lens cleaning disc, or even manually if you know how to do it. The real problem is that slim burners are rubbish, especially when it comes to burning dual-layer media.

Link to comment
Share on other sites

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.