Jump to content

Failed to set write parameters. Reason Invalid field in parameter list


Recommended Posts

Posted

MITSUMI CR-4804TE 2.6C (ATA)

Current Profile: Unknown (Not Supported)

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: Yes

Free Sectors: 359,846

Free Space: 736,964,608 bytes

Free Time: 79:59:71 (MM:SS:FF)

Next Writable Address: 0

 

ATIP Information:

Disc ID: 97m25s30f

Manufacturer: Infodisc Technology Co.

Start Time of LeadIn: 97m25s30f

Last Possible Start Time of LeadOut: 79m59s73f

 

 

I 05:56:11 ImgBurn Version 2.5.6.0 started!

I 05:56:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 05:56:11 Total Physical Memory: 391,664 KB - Available: 58,896 KB

W 05:56:11 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 05:56:11 Initialising SPTI...

I 05:56:11 Searching for SCSI / ATAPI devices...

I 05:56:12 -> Drive 1 - Info: LITEON CD-ROM LTN485S JKU2 (F:) (ATA)

I 05:56:12 -> Drive 2 - Info: MITSUMI CR-4804TE 2.6C (E:) (ATA)

I 05:56:13 -> Drive 3 - Info: YMAX magicJack 3.00 (G:) (USB)

I 05:56:13 Found 1 CD-ROM, 1 CD-RW and 1 Unknown!

W 05:57:41 I/O Interface 'Debug Mode' has been Enabled!

W 05:57:42 I/O Interface 'Debug Mode' has been Disabled!

I 05:57:46 Operation Started!

I 05:57:46 Source File: D:\Torrent Downloads\ubuntu-11.10-desktop-i386.iso

I 05:57:46 Source File Sectors: 141,888 (MODE1/2048)

I 05:57:46 Source File Size: 290,586,624 bytes

I 05:57:46 Source File Volume Identifier: Acronis Media

I 05:57:46 Source File File System(s): ISO9660 (Bootable), Joliet

I 05:57:46 Destination Device: [1:0:0] MITSUMI CR-4804TE 2.6C (E:) (ATA)

I 05:57:46 Destination Media Type: CD-RW*

I 05:57:46 Destination Media Sectors: 359,846

I 05:57:46 Write Mode: CD

I 05:57:46 Write Type: SAO

I 05:57:46 Write Speed: MAX

I 05:57:46 Lock Volume: Yes

I 05:57:46 Test Mode: No

I 05:57:46 OPC: No

I 05:57:46 BURN-Proof: Enabled

I 05:57:46 Write Speed Successfully Set! - Effective: 512 KB/s (3.4x)

E 05:57:46 Failed to set Write Parameters!

E 05:57:46 Reason: Invalid Field in Parameter List

E 05:57:51 Operation Failed! - Duration: 00:00:05

I 05:57:51 Average Write Rate: N/A - Maximum Write Rate: N/A

I 05:59:02 Operation Started!

I 05:59:02 Source File: D:\Torrent Downloads\ubuntu-11.10-desktop-i386.iso

I 05:59:02 Source File Sectors: 141,888 (MODE1/2048)

I 05:59:02 Source File Size: 290,586,624 bytes

I 05:59:02 Source File Volume Identifier: Acronis Media

I 05:59:02 Source File File System(s): ISO9660 (Bootable), Joliet

I 05:59:02 Destination Device: [1:0:0] MITSUMI CR-4804TE 2.6C (E:) (ATA)

I 05:59:02 Destination Media Type: CD-RW*

I 05:59:02 Destination Media Sectors: 359,846

I 05:59:02 Write Mode: CD

I 05:59:02 Write Type: SAO

I 05:59:02 Write Speed: MAX

I 05:59:02 Lock Volume: Yes

I 05:59:02 Test Mode: No

I 05:59:03 OPC: No

I 05:59:03 BURN-Proof: Enabled

I 05:59:03 Write Speed Successfully Set! - Effective: 512 KB/s (3.4x)

E 05:59:03 Failed to set Write Parameters!

E 05:59:03 Reason: Invalid Field in Parameter List

E 06:01:08 Operation Failed! - Duration: 00:02:05

I 06:01:08 Average Write Rate: N/A - Maximum Write Rate: N/A

Posted

Your drive must be about 400 years old and may not support SAO (session at once).

 

Try changing the 'Write Type' in the settings to TAO and then attempt the burn again.

 

Non MMC compliant drives are supported on a drive by drive basis... and that usually only happens if I happen to own said drive.

 

Unfortunately, I don't own that one.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.