Wii game help

[markharris1990]

The problem is that I have been making backups for a long time no problems at all but suddenly out of nowhere every burn successfully completes but when its put into the wii it comes up with an error saying it can't read the disk check manuals I've tried using imgburn newest version and older version tried nero and even tried 3 diffrent brands of disks burning at both 6 and 4 speed and it just refuses to work I tried using the same disks same software same write speed and even same iso images on another computer and it works fine so I reinstalled the windows on the laptop that's having the problem it worked fine for a day or 2 then back to the same problem again I just don't get what it is anymore I know its not the disks coz they work in another laptop its not the softwarwe coz I use it on the other laptop that works its not the burn speed coz I burn at same speed on the other laptop and its not the drive coz I used an external brand new out the box with same results, I'm using a dell laptop 4gb ram 500gb hard drive 2gb processor tried both 32 and 64bit operating system windows 7 blurayrw drive and external samsung dvdrw drive any help.ive tried other peoples wii's to make sure its not my wii with the same problem so im confused. Would be great thanks

[LIGHTNING UK!]

Please post a log - as per the pink box up the top

 

If it burns and verifies ok, ImgBurn did its job. I'm afraid the rest is kinda beyond what this forum is here for.

[markharris1990]

this log is when i burned on another computer with the same results.

 

I 16:12:50 ImgBurn Version 2.5.5.0 started!

I 16:12:50 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 16:12:50 Total Physical Memory: 2,087,032 KB - Available: 1,076,196 KB

I 16:12:50 Initialising SPTI...

I 16:12:50 Searching for SCSI / ATAPI devices...

I 16:12:50 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T10N PP02 (D:) (ATA)

I 16:12:50 -> Drive 2 - Info: TSSTcorp CDDVDW SE-S084F TS00 (F:) (USB)

I 16:12:50 Found 2 DVD±RW/RAMs!

I 16:13:14 Operation Started!

I 16:13:14 Source File: C:\Users\Mark\Desktop\w-sasasr.iso

I 16:13:14 Source File Sectors: 2,294,912 (MODE1/2048)

I 16:13:15 Source File Size: 4,699,979,776 bytes

I 16:13:15 Source File Volume Identifier: Sonic & Sega All-Stars Racing

I 16:13:15 Source File File System(s): Special

I 16:13:15 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-T10N PP02 (D:) (ATA)

I 16:13:15 Destination Media Type: DVD-R (Disc ID: RITEKG05) (Speeds: 4x, 8x)

I 16:13:15 Destination Media Sectors: 2,297,888

I 16:13:15 Write Mode: DVD

I 16:13:15 Write Type: DAO

I 16:13:15 Write Speed: 4x

I 16:13:15 Link Size: Auto

I 16:13:15 Lock Volume: Yes

I 16:13:15 Test Mode: No

I 16:13:15 OPC: No

I 16:13:15 BURN-Proof: Enabled

I 16:13:15 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)

I 16:13:16 Filling Buffer... (40 MB)

I 16:13:17 Writing LeadIn...

I 16:14:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 16:14:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 16:28:47 Synchronising Cache...

I 16:28:58 Exporting Graph Data...

I 16:28:58 Graph Data File: C:\Users\Mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T10N_PP02_10-JANUARY-2012_16-13_RITEKG05_4x.ibg

I 16:28:58 Export Successfully Completed!

I 16:28:58 Operation Successfully Completed! - Duration: 00:15:43

I 16:28:58 Average Write Rate: 5,203 KB/s (3.8x) - Maximum Write Rate: 5,725 KB/s (4.1x)

[LIGHTNING UK!]

Your initial post makes it sound like everything works and yet nothing works.

 

Your second post says you were burning on a different computer and it still failed.

 

Let's just stick to one machine, one drive and go from there.

 

So you've got 2 drives on your Dell laptop. One internal BD writer (or BD combo) and one external Samsung DVD writer. Both of those are obviously slimline drives - which isn't ideal.

 

Your Samsung DVD burner has a firmware update available for it - http://www.firmwarehq.com/Samsung/SE-S084F/files.html

 

What are the MIDs/dyes used by the 3 'brands' of discs you've tried? The brand name doesn't mean anything. You could buy 3 different ones and end up with the same MID/dye being used on all 3. Your log shows 'RITEKG05'. I lost interest in RITEK media after the RITEKG04 days (about 7 years ago!)

 

When you burn, make sure you leave the 'Verify' option enabled (or reenable it if you've turned it off). If your burner can't read the disc is just wrote then there's a good chance it won't be readable in another device either.

 

Always use the current version of ImgBurn (2.5.6.0 at the mo) and keep Windows updates (you need to install service pack 1 on that Windows 7 PC).

 

When you've got things updated and found out what all of your discs are, burn and verify a disc in each of you drives (also with updated firmware) and post the results.

[markharris1990]

Thanks im going to reinstall a fresh installation of windows in the next hour or so so ill install all current versions of software, install service pack 1 like you said and do all the things you said and post results this afternoon.

thanks again.

Edited January 11, 2012 by markharris1990

[markharris1990]

Update:

reinstalled a fresh installation of windows this time i installed vista with sp2, installed all the normal programs i use, installed newest imgburn (2.5.6.0) updated the fimware on samsung external dvdrw drive, so now the computer im using is running 2ghz processor, 500gb hard drive, 4gb ram, vista sp2,samsung dvdrw drive external, BD combi internal drive, imgburn version 2.5.6.0 using traxdata dvd-r disks, bured using 4x speed, tried 3 diffrent game files and so far so good all gamessuccessful burns and work perfect. last time i did a fresh install it worked for a day or 2 then same problem again so for now its perfect but in a e days time ill post and keep you upto date with if the problem is solved.

thank you for he help

[kryten]

I'm not sure we're getting the whole story. Win 7 is on SP1. Vista on SP2. Log say Win 7. So what's really going on?

[markharris1990]

it was originally on windows 7 with no service pack when i had the problem and made the log but because the copy of windows 7 i had wasnt legit i installed a fresh installation of a legit copy of vista and installed sp2 and the problem has been cured for now, ill post back in a day or 2 with the results of whether it still works or is just lucky enough to cure the problem for a few days.

[markharris1990]

Update: its been a few days since i reintsalled the windows and installed sp2 and installed latest imgburn, ive done atleast 20burns since and every one of them worked fine no problems at all so im guessing the windows was the problem

thanks for all the help