maxim's Posted January 16, 2012 Posted January 16, 2012 Hi all,i'm a french user of imgburn who's experencing some threshold problems.Here are my system's components: -proc: AMD athlon 64 2.40 Ghz -motherchip: ASROCK Alive NF7g-hd ready -2Go of ram (kingston 1066 Mhz) -Hard disk: Maxtor STM3160211 (7200 tr/min, 160Go) While i'm burning my iso files, imgburn is the only software working. Here's a log: I 21:32:11 ImgBurn Version 2.5.6.0 started! I 21:32:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:32:11 Total Physical Memory: 2 358 512 KB - Available: 1 750 580 KB I 21:32:11 Initialising SPTI... I 21:32:11 Searching for SCSI / ATAPI devices... I 21:32:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.02-07 (D:) (ATA) I 21:32:11 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (E:) (ATA) I 21:32:11 Found 2 DVD±RW/RAMs! I 21:35:44 Operation Started! I 21:35:44 Source File: C:\Documents and Settings\maxime\Mes documents\x.dvd I 21:35:44 Source File Sectors: 3 827 488 (MODE1/2048) I 21:35:44 Source File Size: 7 838 695 424 bytes I 21:35:44 Source File Volume Identifier: DVD_ROM I 21:35:44 Source File Volume Set Identifier: ec67c000MS UDFBridge I 21:35:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:35:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:35:44 Source File File System(s): ISO9660; UDF (1.50) I 21:35:44 Destination Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA) I 21:35:44 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 21:35:44 Destination Media Supported Write Speeds: 4x; 6x; 8x I 21:35:44 Destination Media Sectors: 4 173 824 I 21:35:44 Write Mode: DVD I 21:35:44 Write Type: DAO I 21:35:44 Write Speed: 4x I 21:35:44 Link Size: Auto I 21:35:44 Lock Volume: Yes I 21:35:44 Test Mode: No I 21:35:44 OPC: No I 21:35:44 BURN-Proof: Enabled I 21:35:44 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 21:35:44 Book Type Setting: DVD-ROM I 21:35:44 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 21:35:44 User Specified L0 Data Zone Capacity: 1 913 760 I 21:36:24 Set L0 Data Zone Capacity Succeeded! I 21:36:33 Filling Buffer... (20 MB) I 21:36:34 Writing LeadIn... I 21:36:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:36:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:36:35 Writing Layer 0... (LBA: 0 - 1913759) I 21:48:28 Writing Layer 1... (LBA: 1913760 - 3827487) W 21:51:25 Waiting for buffers to recover... (LBA: 2371744) W 21:51:34 Waiting for hard disk activity to reach threshold level... I 21:51:41 Writing Sectors... W 21:52:24 Waiting for buffers to recover... (LBA: 2460096) W 21:52:30 Waiting for hard disk activity to reach threshold level... I 21:52:32 Writing Sectors... W 21:52:57 Waiting for buffers to recover... (LBA: 2512064) W 21:53:02 Waiting for hard disk activity to reach threshold level... I 21:53:16 Writing Sectors... W 21:54:01 Waiting for buffers to recover... (LBA: 2607200) W 21:54:07 Waiting for hard disk activity to reach threshold level... I 21:54:21 Writing Sectors... W 21:54:41 Waiting for buffers to recover... (LBA: 2649536) W 21:54:47 Waiting for hard disk activity to reach threshold level... I 21:54:53 Writing Sectors... W 21:55:13 Waiting for buffers to recover... (LBA: 2691136) W 21:55:20 Waiting for hard disk activity to reach threshold level... I 21:55:27 Writing Sectors... W 21:55:49 Waiting for buffers to recover... (LBA: 2736768) W 21:55:57 Waiting for hard disk activity to reach threshold level... I 21:56:05 Writing Sectors... I 22:02:55 Synchronising Cache... I 22:03:02 Closing Track... I 22:03:03 Finalising Disc... I 22:03:36 Export Successfully Completed! I 22:03:36 Operation Successfully Completed! - Duration: 00:27:52 I 22:03:36 Average Write Rate: 4 844 KB/s (3.5x) - Maximum Write Rate: 5 645 KB/s (4.1x) I 22:03:36 Cycling Tray before Verify... W 22:03:43 Waiting for device to become ready... I 22:03:58 Device Ready! I 22:03:58 Operation Started! I 22:03:58 Source Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA) I 22:03:58 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 22:03:58 Source Media Supported Write Speeds: 4x; 6x; 8x I 22:03:58 Image File: C:\Documents and Settings\maxime\Mes documents\x.dvd I 22:03:58 Image File Sectors: 3 827 488 (MODE1/2048) I 22:03:58 Image File Size: 7 838 695 424 bytes I 22:03:58 Image File Volume Identifier: DVD_ROM I 22:03:58 Image File Volume Set Identifier: ec67c000MS UDFBridge I 22:03:58 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 22:03:58 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 22:03:58 Image File File System(s): ISO9660; UDF (1.50) I 22:03:58 Read Speed (Data/Audio): MAX / MAX I 22:03:59 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 22:03:59 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 22:03:59 Verifying Layer 0... (LBA: 0 - 1913759) I 22:09:42 Verifying Layer 1... (LBA: 1913760 - 3827487) I 22:15:24 Operation Successfully Completed! - Duration: 00:11:24 I 22:15:24 Average Verify Rate: 11 207 KB/s (8.1x) - Maximum Verify Rate: 16 114 KB/s (11.6x) I 23:08:31 Close Request Acknowledged I 23:08:31 Closing Down... I 23:08:32 Shutting down SPTI... I 23:08:32 ImgBurn closed! I hope someone will help me. regards, Maxime
LIGHTNING UK! Posted January 16, 2012 Posted January 16, 2012 Something must be kicking into action in the background that's accessing the hdd. It's taking up to 8 seconds to fill the 20 MB buffer... that's VERY slow.
spinningwheel Posted January 18, 2012 Posted January 18, 2012 I would try using EndItAll, you can find it through Google, before burning and whatever is using your hdd should stop.
maxim's Posted January 18, 2012 Author Posted January 18, 2012 Thanks a lot spinningwheel, i'll try as soon as i'll come back home (which means this week-end).I'll tell you the results
LIGHTNING UK! Posted January 18, 2012 Posted January 18, 2012 Normally it's stuff like antivirus utils, backup, defrag, indexing etc.
maxim's Posted January 21, 2012 Author Posted January 21, 2012 After using enditall (I tried to "kill" as many applications as i could, following instructions found on the web) here's a new log of my burn (the disc is still not recognized by my xbox360, played as a dvd media) for the same file: I 13:18:03 ImgBurn Version 2.5.6.0 started! I 13:18:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:18:04 Total Physical Memory: 2 358 512 KB - Available: 2 004 580 KB (That's better!) I 13:18:04 Initialising SPTI... I 13:18:04 Searching for SCSI / ATAPI devices... I 13:18:04 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55N 1.02-07 (D:) (ATA) I 13:18:04 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (E:) (ATA) I 13:18:04 Found 2 DVD±RW/RAMs! I 13:19:10 Operation Started! I 13:19:10 Source File: C:\Documents and Settings\maxime\x.dvd I 13:19:10 Source File Sectors: 3 827 488 (MODE1/2048) I 13:19:10 Source File Size: 7 838 695 424 bytes I 13:19:10 Source File Volume Identifier: DVD_ROM I 13:19:10 Source File Volume Set Identifier: ec67c000MS UDFBridge I 13:19:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:19:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:19:10 Source File File System(s): ISO9660; UDF (1.50) I 13:19:10 Destination Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA) I 13:19:11 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 13:19:11 Destination Media Supported Write Speeds: 4x; 6x; 8x I 13:19:11 Destination Media Sectors: 4 173 824 I 13:19:11 Write Mode: DVD I 13:19:11 Write Type: DAO I 13:19:11 Write Speed: 4x I 13:19:11 Link Size: Auto I 13:19:11 Lock Volume: Yes I 13:19:11 Test Mode: No I 13:19:11 OPC: No I 13:19:11 BURN-Proof: Enabled I 13:19:11 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 13:19:11 Book Type Setting: DVD-ROM I 13:19:11 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:19:11 User Specified L0 Data Zone Capacity: 1 913 760 I 13:19:53 Set L0 Data Zone Capacity Succeeded! I 13:19:55 Filling Buffer... (20 MB) I 13:19:55 Writing LeadIn... I 13:19:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:19:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:19:57 Writing Layer 0... (LBA: 0 - 1913759) I 13:31:51 Writing Layer 1... (LBA: 1913760 - 3827487) I 13:43:50 Synchronising Cache... I 13:43:56 Closing Track... I 13:43:57 Finalising Disc... I 13:44:31 Exporting Graph Data... I 13:44:31 Graph Data File: C:\Documents and Settings\maxime\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SAMEDI-21-JANVIER-2012_13-19_MKM-003-00_4x.ibg I 13:44:31 Export Successfully Completed! I 13:44:31 Operation Successfully Completed! - Duration: 00:25:20 I 13:44:31 Average Write Rate: 5 345 KB/s (3.9x) - Maximum Write Rate: 5 645 KB/s (4.1x) I 13:44:31 Cycling Tray before Verify... W 13:44:38 Waiting for device to become ready... I 13:44:52 Device Ready! I 13:44:52 Operation Started! I 13:44:52 Source Device: [2:0:0] ATAPI iHAS224 B GL0A (E:) (ATA) I 13:44:52 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 13:44:52 Source Media Supported Write Speeds: 4x; 6x; 8x I 13:44:52 Image File: C:\Documents and Settings\maxime\x.dvd I 13:44:52 Image File Sectors: 3 827 488 (MODE1/2048) I 13:44:52 Image File Size: 7 838 695 424 bytes I 13:44:52 Image File Volume Identifier: DVD_ROM I 13:44:52 Image File Volume Set Identifier: ec67c000MS UDFBridge I 13:44:52 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:44:52 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 13:44:52 Image File File System(s): ISO9660; UDF (1.50) I 13:44:52 Read Speed (Data/Audio): MAX / MAX I 13:44:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:44:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:44:54 Verifying Layer 0... (LBA: 0 - 1913759) I 13:50:36 Verifying Layer 1... (LBA: 1913760 - 3827487) I 13:56:18 Exporting Graph Data... I 13:56:18 Graph Data File: C:\Documents and Settings\maxime\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAS224_B_GL0A_SAMEDI-21-JANVIER-2012_13-19_MKM-003-00_4x.ibg I 13:56:18 Export Successfully Completed! I 13:56:18 Operation Successfully Completed! - Duration: 00:11:24 I 13:56:18 Average Verify Rate: 11 207 KB/s (8.1x) - Maximum Verify Rate: 16 147 KB/s (11.7x) "Filling buffer" and "writing lead in" took place in the same second , that's a good point. But I still have a "Waiting for device to become ready..." message. Anyway i'm starting to think my console is also responsible for those failures, i guess "I'm a and a bad one at that.", as you said.
Cynthia Posted January 21, 2012 Posted January 21, 2012 14 sec is normal. I 17:17:04 Cycling Tray before Verify...W 17:17:12 Waiting for device to become ready... I 17:17:22 Device Ready! I 17:17:24 Operation Started!
Recommended Posts