ImgBurn gets stuck on "Searching for SCSI/ATAPI Devices"

[tomahawkTom]

Hi everyone,

 

This is my first time posting here in the forums so you can just tell me if I did anything wrong.

 

Whenever I'm loading ImgBurn, it doesn't get past this log: 'Searching for SCSI/ATAPI Devices'

I looked at the FAQ first to see if there's anything already posted in there. There is, so I followed the instructions and ran the "Enable_Debug_Mode.reg." This is the log after I ran it.

 

I 13:29:07 ImgBurn Version 2.5.6.0 started!

I 13:29:07 Microsoft Windows 7 Professional Edition (6.1, Build 7601 : Service Pack 1)

I 13:29:07 Total Physical Memory: 1,963,184 KB - Available: 737,492 KB

W 13:29:07 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

W 13:29:07 I/O Interface 'Debug Mode' Enabled!

I 13:29:07 Initialising SPTI...

I 13:29:07 Searching for SCSI / ATAPI devices...

I 13:29:07 Initialising Device (\\?\ide#cdromtsstcgrp_cddvdw_ts%l632h________________tec0____#5&273a8cb0&0&0.0.0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b})...

I 13:29:07 Device Address: [0:0:0]

I 13:29:07 Drive Letter: (E:)

I 13:29:07 Family Tree:

I 13:29:07 -> ACPI x86-based PC

I 13:29:07 -> Microsoft ACPI-Compliant System

I 13:29:07 -> PCI bus

I 13:29:07 -> SiS PCI IDE Controller (VEN_1039&DEV_5513 - SIS)

I 13:29:07 -> IDE Channel (ATA Channel 0)

I 13:29:07 -> CD-ROM Drive (TSSTcgrp CDDVDW TS%L632H ATA Device) (Channel 0, Target 0, Lun 0)

I 13:29:07 Device Maximum Transfer Length: 131,072

I 13:29:07 Device Maximum Physical Pages: 33

I 13:29:07 Device Alignment Mask: 1

I 13:29:07 Device Bus Type (Adapter/Device): ATA / ATAPI

I 13:29:07 [0:0:0] TSSTcgrp CDDVDW TS%L632H TEC0 (E:) (ATA)

I 13:29:07 CDB: 12 00 00 00 60 00

I 13:29:07 CDB Interpretation: Inquiry

I 13:29:08 BUFFER: 05 80 00 32 5B 00 00 00 54 53 53 54 63 67 72 70 43 44 44 56 44 57 20 54 53 25 4C 36 33 32 48 20 54 45 43 30 54 45 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00

I 13:29:08 [0:0:0] TSSTcgrp CDDVDW TS%L632H TEC0 (E:) (ATA)

I 13:29:08 CDB: 5A 00 2A 00 00 00 00 00 FC 00

I 13:29:08 CDB Interpretation: Mode Sense (10) - Page Code (0x2A) - CD/DVD Capabilities and Mechanical Status

I 13:29:08 BUFFER: 00 42 70 00 00 00 00 00 2A 42 3F 37 F1 77 29 23 10 82 01 00 08 00 10 82 00 10 10 82 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I 13:29:08 [0:0:0] TSSTcgrp CDDVDW TS%L632H TEC0 (E:) (ATA)

I 13:29:08 CDB: 46 02 01 08 00 00 00 00 F8 00

I 13:29:08 CDB Interpretation: Get Configuration - Drive Serial Number

I 13:29:08 BUFFER: 00 00 00 14 00 00 00 00 01 00 03 14 54 53 2D 44 36 33 32 40 46 61 72 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I 13:29:08 [0:0:0] TSSTcgrp CDDVDW TS%L632H TEC0 (E:) (ATA)

I 13:29:08 CDB: 46 02 00 03 00 00 00 00 10 00

I 13:29:08 CDB Interpretation: Get Configuration - Removable Medium

I 13:29:08 BUFFER: 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00

I 13:29:08 [0:0:0] TSSTcgrp CDDVDW TS%L632H TEC0 (E:) (ATA)

I 13:29:08 CDB: 46 02 01 02 00 00 00 00 10 00

I 13:29:08 CDB Interpretation: Get Configuration - Embedded Changer

 

Anyone have ideas regarding this? It would be very helpful.

[LIGHTNING UK!]

Your system/drive is having trouble processing the last command listed in the log.

 

I 13:29:08 CDB: 46 02 01 02 00 00 00 00 10 00

I 13:29:08 CDB Interpretation: Get Configuration - Embedded Changer

 

See if you can find an updated SIS controller driver for your motherboard.