gondo Posted February 19, 2012 Posted February 19, 2012 When burning DVDs, UDF Mode1, the 1st attempt fails every time half way through. The 2nd attempt is successful 100% of the time. The next disc will fail again with a successful burn the 2nd time around. What causes every burn to fail on only the 1st attempt?
LIGHTNING UK! Posted February 19, 2012 Posted February 19, 2012 Post the log please - as per the pink box up the top
gondo Posted February 20, 2012 Author Posted February 20, 2012 I 17:59:43 ImgBurn Version 2.5.6.0 started! I 17:59:43 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 17:59:43 Total Physical Memory: 8,386,744 KB - Available: 5,938,444 KB I 17:59:43 Initialising SPTI... I 17:59:43 Searching for SCSI / ATAPI devices... I 17:59:44 -> Drive 1 - Info: PIONEER DVD-RW DVR-216D 1.09 (F:) (ATA) I 17:59:44 Found 1 DVD±RW! I 18:03:18 Operation Started! I 18:03:18 Building Image Tree... I 18:03:22 Calculating Totals... I 18:03:22 Preparing Image... I 18:03:23 Contents: 1 File, 0 Folders I 18:03:23 Content Type: Data I 18:03:23 Data Type: MODE1/2048 I 18:03:23 File System(s): UDF (1.02) I 18:03:23 Volume Label: Paranormal Activity 3 I 18:03:23 Size: 8,509,240,730 bytes I 18:03:23 Sectors: 4,154,903 I 18:03:23 Image Size: 8,509,784,064 bytes I 18:03:23 Image Sectors: 4,155,168 I 18:03:26 Operation Successfully Completed! - Duration: 00:00:08 I 18:03:27 Operation Started! I 18:03:27 Source File: -==/\/[bUILD IMAGE]\/\==- I 18:03:27 Source File Sectors: 4,155,168 (MODE1/2048) I 18:03:27 Source File Size: 8,509,784,064 bytes I 18:03:27 Source File Volume Identifier: Paranormal Activity 3 I 18:03:27 Source File Volume Set Identifier: 40549069003F671D I 18:03:27 Source File Application Identifier: ImgBurn v2.5.6.0 I 18:03:27 Source File Implementation Identifier: ImgBurn I 18:03:27 Source File File System(s): UDF (1.02) I 18:03:27 Destination Device: [0:1:0] PIONEER DVD-RW DVR-216D 1.09 (F:) (ATA) I 18:03:27 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) I 18:03:27 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x I 18:03:27 Destination Media Sectors: 4,173,824 I 18:03:27 Write Mode: DVD I 18:03:27 Write Type: DAO I 18:03:27 Write Speed: 4x I 18:03:27 Link Size: Auto I 18:03:27 Lock Volume: Yes I 18:03:27 Test Mode: No I 18:03:27 OPC: No I 18:03:27 BURN-Proof: Enabled I 18:03:27 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 18:03:27 Advanced Settings - Optimal Writing Speed: No I 18:03:27 Optimal L0 Data Zone Capacity: 2,077,584 I 18:03:27 Optimal L0 Data Zone Method: ECC Block Boundary I 18:03:42 Set L0 Data Zone Capacity Succeeded! I 18:03:42 Filling Buffer... (40 MB) I 18:03:43 Writing LeadIn... I 18:03:45 Writing Session 1 of 1... (1 Track, LBA: 0 - 4155167) I 18:03:45 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4155167) I 18:03:45 Writing Layer 0... (LBA: 0 - 2077583) I 18:16:49 Writing Layer 1... (LBA: 2077584 - 4155167) W 18:18:53 Failed to Write Sectors 2359600 - 2359631 - Reason: Write Error W 18:18:53 Retrying (1 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (2 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (3 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (4 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (5 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (6 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (7 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (8 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (9 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (10 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (11 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (12 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (13 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (14 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (15 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (16 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (17 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (18 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (19 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:00 Retrying (20 of 20)... W 18:19:00 Retry Failed - Reason: Invalid Address For Write W 18:19:11 Retrying (21)... W 18:19:11 Retry Failed - Reason: Invalid Address For Write W 18:19:12 Retrying (22)... W 18:19:12 Retry Failed - Reason: Invalid Address For Write E 18:19:14 Failed to Write Sectors 2359600 - 2359631 - Reason: Write Error E 18:19:14 Next Writable Address: 2358864 I 18:19:14 Synchronising Cache... W 18:19:22 User opted to skip the 'Close Track/Session/Disc' functions. E 18:19:22 Failed to Write Image! I 18:19:22 Exporting Graph Data... I 18:19:22 Graph Data File: C:\Users\Gondo\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-216D_1.09_MONDAY-FEBRUARY-20-2012_6-03_PM_RICOHJPN-D01-67_4x.ibg I 18:19:22 Export Successfully Completed! E 18:19:22 Operation Failed! - Duration: 00:15:55 I 18:19:22 Average Write Rate: 5,079 KB/s (3.7x) - Maximum Write Rate: 5,576 KB/s (4.0x)
LIGHTNING UK! Posted February 20, 2012 Posted February 20, 2012 Your drive is just reporting a 'Write Error' when trying to burn those discs. I can't really speak for the coincidental 'always failing 1st time' issue (maybe some sort of built in 'learning' feature of the drive that's messing up?) but I'd guess your drive is always producing low quality burns on the discs and sometimes it totally fails. http://forum.imgburn.com/index.php?showtopic=8000
gondo Posted February 20, 2012 Author Posted February 20, 2012 Yeah I'm using some leftover double layer inkjet glossy MBI disks. They are Ricoh ID so not the best media. I'm used to using Taiyo Yuden so this would explain my first time having so many problems and coasters. I'm about to order some FTI Falcon SmartGuard double layers and some Smartguard Glossy BLuerays. It's too bad Taiyo Yuden doesn't ride their reputation while it's good and develop a better website. Their stock is also horrible. It should be no problem to get watershield dual layer and bluerays from Taiyo Yuden. They only offer 1 type of blueray. I forsee FTI taking over as the king of the media world.
Recommended Posts