shadowcaster Posted February 20, 2012 Share Posted February 20, 2012 About 50% point, burning a BD25, when a dialog box pops up with the topic message CRC Cyclic redundancy check error re 00000.m2ts. Options are to cancel or retry and I press "retry" and the burn finishes normally. Then during the "verify" process the same message appears again. I press "retry" and the verify finishes successfully. Nowhere in the log files is there an indication that this happenned. ; ; //****************************************\\ ; ImgBurn Version 2.5.6.0 - Log ; Monday, 20 February 2012, 14:47:55 ; \\****************************************// ; ; I 13:45:19 ImgBurn Version 2.5.6.0 started! I 13:45:19 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:45:19 Total Physical Memory: 3,652,912 KB - Available: 1,755,240 KB I 13:45:19 Initialising SPTI... I 13:45:19 Searching for SCSI / ATAPI devices... I 13:45:19 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 13:45:20 -> Drive 2 - Info: hp DVD-RAM GH40L RB0E (G:) (ATA) I 13:45:20 -> Drive 3 - Info: Generic DVD-ROM 1.0 (H:) (SCSI) I 13:45:20 Found 1 DVD-ROM, 1 DVD±RW/RAM and 1 HD DVD-ROM/BD-RE! I 13:45:25 Operation Started! I 13:45:25 Building Image Tree... I 13:45:25 Calculating Totals... I 13:45:25 Preparing Image... I 13:45:25 Contents: 16 Files, 15 Folders I 13:45:25 Content Type: BD Video I 13:45:25 Data Type: MODE1/2048 I 13:45:25 File System(s): UDF (2.50) I 13:45:25 Volume Label: [Not Configured] I 13:45:25 Size: 24,883,917,500 bytes I 13:45:25 Sectors: 12,150,361 I 13:45:25 Image Size: 24,884,936,704 bytes I 13:45:25 Image Sectors: 12,150,848 I 13:45:25 Operation Successfully Completed! - Duration: 00:00:00 I 13:47:13 Operation Started! I 13:47:13 Building Image Tree... I 13:47:13 Calculating Totals... I 13:47:13 Preparing Image... I 13:47:13 Contents: 16 Files, 15 Folders I 13:47:13 Content Type: BD Video I 13:47:13 Data Type: MODE1/2048 I 13:47:13 File System(s): UDF (2.50) I 13:47:13 Volume Label: The_Phantom_Of_The_Opera I 13:47:13 Size: 24,883,917,500 bytes I 13:47:13 Sectors: 12,150,361 I 13:47:13 Image Size: 24,884,936,704 bytes I 13:47:13 Image Sectors: 12,150,848 I 13:47:16 Operation Successfully Completed! - Duration: 00:00:02 I 13:47:16 Operation Started! I 13:47:16 Source File: -==/\/[bUILD IMAGE]\/\==- I 13:47:16 Source File Sectors: 12,150,848 (MODE1/2048) I 13:47:16 Source File Size: 24,884,936,704 bytes I 13:47:16 Source File Volume Identifier: The_Phantom_Of_The_Opera I 13:47:16 Source File Volume Set Identifier: 40546DE600B967D9 I 13:47:16 Source File Application Identifier: ImgBurn v2.5.6.0 I 13:47:16 Source File Implementation Identifier: ImgBurn I 13:47:16 Source File File System(s): UDF (2.50) I 13:47:16 Destination Device: [3:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 13:47:16 Destination Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 13:47:16 Destination Media Supported Write Speeds: 2x, 4x, 6x I 13:47:16 Destination Media Sectors: 12,219,392 I 13:47:16 Write Mode: BD I 13:47:16 Write Type: DAO I 13:47:16 Write Speed: 4x I 13:47:16 BD-R Verify Not Required: Yes I 13:47:16 Link Size: Auto I 13:47:16 Lock Volume: Yes I 13:47:16 Test Mode: No I 13:47:16 OPC: No I 13:47:16 BURN-Proof: Enabled I 13:47:16 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x) I 13:47:27 Filling Buffer... (60 MB) I 13:47:28 Writing LeadIn... I 13:47:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 12150847) I 13:47:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12150847) I 14:14:59 Synchronising Cache... I 14:15:02 Closing Track... I 14:15:03 Finalising Disc... I 14:15:12 Exporting Graph Data... I 14:15:12 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_GGW-H20L_YL05_MONDAY-FEBRUARY-20-2012_1-47_PM_VERBAT-IMe-000_4x.ibg I 14:15:12 Export Successfully Completed! I 14:15:12 Operation Successfully Completed! - Duration: 00:27:56 I 14:15:12 Average Write Rate: 14,728 KB/s (3.3x) - Maximum Write Rate: 18,326 KB/s (4.1x) I 14:15:12 Cycling Tray before Verify... W 14:15:21 Waiting for device to become ready... I 14:15:36 Device Ready! I 14:15:37 Operation Started! I 14:15:37 Source Device: [3:1:0] HL-DT-ST BD-RE GGW-H20L YL05 (F:) (ATA) I 14:15:37 Source Media Type: BD-R (Disc ID: VERBAT-IMe-000) I 14:15:37 Source Media Supported Write Speeds: 2x, 4x, 6x I 14:15:37 Image File: -==/\/[bUILD IMAGE]\/\==- I 14:15:37 Image File Sectors: 12,150,848 (MODE1/2048) I 14:15:37 Image File Size: 24,884,936,704 bytes I 14:15:37 Image File Volume Identifier: The_Phantom_Of_The_Opera I 14:15:37 Image File Volume Set Identifier: 40546DE600B967D9 I 14:15:37 Image File Application Identifier: ImgBurn v2.5.6.0 I 14:15:37 Image File Implementation Identifier: ImgBurn I 14:15:37 Image File File System(s): UDF (2.50) I 14:15:37 Read Speed (Data/Audio): MAX / MAX I 14:15:38 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12150847) I 14:15:38 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12150847) I 14:47:17 Exporting Graph Data... I 14:47:17 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_GGW-H20L_YL05_MONDAY-FEBRUARY-20-2012_1-47_PM_VERBAT-IMe-000_4x.ibg I 14:47:17 Export Successfully Completed! I 14:47:17 Operation Successfully Completed! - Duration: 00:31:39 I 14:47:17 Average Verify Rate: 12,810 KB/s (2.8x) - Maximum Verify Rate: 33,086 KB/s (7.4x) I 14:47:55 Close Request Acknowledged I 14:47:55 Closing Down... I 14:47:55 Shutting down SPTI... I 14:47:55 ImgBurn closed! Export graph : I also ran a read test in DVDinfoPro and there were no errors. The disc appears to play properly at the time point of the message so is this a problem or not ? Thanks Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 20, 2012 Share Posted February 20, 2012 That sounds like a problem with reading the file on your hdd, not on the disc. You should run chkdsk on the hdd in question and do a full surface scan for bad sectors. There's a new firmware for your BD burner btw. http://www.firmwarehq.com/LG/GGW-H20L/files.html Link to comment Share on other sites More sharing options...
shadowcaster Posted February 20, 2012 Author Share Posted February 20, 2012 (edited) Thanks for the firmware tip! Chkdsk and Hard Drive Sentinel report no weak/bad sectors. I'l try a surface scan later tonight. So, are you saying the burn is good? Also, what are those 2 spikes in the export graph and are they significant? Edited February 20, 2012 by shadowcaster Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 21, 2012 Share Posted February 21, 2012 Well I can't see any info in the log about being unable to read the disc (or hdd)... so unless you can capture the error you're seeing via a screenshot, I can't really be sure on what you're seeing. It doesn't look like the disc had a problem though. The spikes don't mean anything. Link to comment Share on other sites More sharing options...
shadowcaster Posted February 21, 2012 Author Share Posted February 21, 2012 As always, thank you !! Link to comment Share on other sites More sharing options...
Recommended Posts