HeftCD Posted February 27, 2012 Share Posted February 27, 2012 (edited) Hello, excuse my ask and expression of the topic aboce for this request. (my English is not best - and I do not know how to describe my problem) I bought an external DVD Burner from LG end of January 2012, because my interal laptop burner is tending to be out of order. This is connected via Y- USB 2.0 cables (2 in Laptop, one in burner) So. Everything works fine with burnin with IMBurn now . But finished my DVD it is not ejected automatically after burning ( => will I need to set this in settings? => then where is th option). So, when I try to open the successful burned DVD with my Filemanager (Total Commander and also MS File explorer - i get presented the directory and file information of the last read (inserted before) CD/DVD - but of course I cannot open any file. Hexvalues of content are 00 00 00 00 00 - yes, that "shown" DVD is not in drive - so it cannot show the content of the file. Ejecting the DVD and reload of the file or Refreshing with F5 do not have any effect. The directory and files I see are NOT the new but the old files I accsessed a session before. HOW can I make visible & accessable the Data which I just burned? (NERO just opened and ejected the DVD; I put it in again and could access the files normally - WHY DOES THIS NOT WORK WITH Imgburn in equal way?) (Two times I burned in panic twice the same constallation of project file without closing IMGburn or chaning anything in that program to ensure all Data are burned correctly. inserting the DVD before or a new SOMETIMES (not all the time) leads to correct content of selected DVD) WHAT Do I need to change, to access the JUST BURNED DVD after Burning without getting a DJ ? (I want to play the just burned videos or compare the files before putting the DVD into cupboard to all the others) MANY THANKS !!!!!! I hope someone can help ? Edited February 27, 2012 by HeftCD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2012 Share Posted February 27, 2012 Do you verify when you burn? Assuming the verify operation completed successfully, your disc should be fine. (Post a log please - as per the pink box up the top ) If Windows can't see the disc has changed you may need to close ImgBurn and refresh the 'Explorer' ('My Computer') window so it checks the disc again. Ejecting + reinserting the disc whilst doing that make Windows realise it needs to check the disc again. Link to comment Share on other sites More sharing options...
HeftCD Posted February 27, 2012 Author Share Posted February 27, 2012 (edited) I 23:38:54 ImgBurn Version 2.5.6.0 started! I 23:38:54 Microsoft Windows XP Professional (5.1, : Service Pack 3) I 23:38:54 Total Physical Memory: 3.144.876 KB - Available: 1.597.312 KB I 23:38:54 Initialising SPTI... I 23:38:54 Searching for SCSI / ATAPI devices... I 23:38:54 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T20L NR02 (E:) (ATA) I 23:38:55 -> Drive 2 - Info: HL-DT-ST DVDRAM GP10NB21 1.00-NF (G:) (USB) I 23:38:55 Found 2 DVD±RW/RAMs! I 23:40:10 Operation Started! I 23:40:10 Building Image Tree... I 23:40:10 Checking Directory Depth... I 23:40:10 Calculating Totals... I 23:40:10 Preparing Image... I 23:40:11 Checking Path Length... I 23:40:11 Contents: 12 Files, 1 Folder I 23:40:11 Content Type: Data I 23:40:11 Data Type: MODE1/2048 I 23:40:11 File System(s): ISO9660, Joliet, UDF (1.02) I 23:40:11 Volume Label: [Not Configured] I 23:40:11 Size: 4.794.005.996 bytes I 23:40:11 Sectors: 2.340.828 I 23:40:11 Image Size: 4.794.613.760 bytes I 23:40:11 Image Sectors: 2.341.120 I 23:40:11 Operation Successfully Completed! - Duration: 00:00:00 I 00:31:42 Operation Started! I 00:31:42 Building Image Tree... I 00:31:42 Checking Directory Depth... I 00:31:42 Calculating Totals... I 00:31:42 Preparing Image... I 00:31:42 Checking Path Length... I 00:31:42 Contents: 12 Files, 0 Folders I 00:31:42 Content Type: Data I 00:31:42 Data Type: MODE1/2048 I 00:31:42 File System(s): ISO9660, Joliet, UDF (1.02) I 00:31:42 Volume Label: [Not Configured] I 00:31:42 Size: 4.794.005.996 bytes I 00:31:42 Sectors: 2.340.828 I 00:31:42 Image Size: 4.794.613.760 bytes I 00:31:42 Image Sectors: 2.341.120 I 00:31:42 Operation Successfully Completed! - Duration: 00:00:00 I 00:33:42 Operation Started! I 00:33:42 Building Image Tree... I 00:33:42 Checking Directory Depth... I 00:33:42 Calculating Totals... I 00:33:42 Preparing Image... I 00:33:42 Checking Path Length... I 00:33:42 Contents: 13 Files, 2 Folders I 00:33:42 Content Type: Data I 00:33:42 Data Type: MODE1/2048 I 00:33:42 File System(s): ISO9660, Joliet, UDF (1.02) I 00:33:42 Volume Label: [Not Configured] I 00:33:42 Size: 4.687.118.125 bytes I 00:33:42 Sectors: 2.288.638 I 00:33:42 Image Size: 4.687.724.544 bytes I 00:33:42 Image Sectors: 2.288.928 I 00:33:42 Operation Successfully Completed! - Duration: 00:00:00 I 00:34:39 Operation Started! I 00:34:39 Building Image Tree... I 00:34:39 Checking Directory Depth... I 00:34:39 Calculating Totals... I 00:34:39 Preparing Image... I 00:34:39 Checking Path Length... I 00:34:39 Contents: 14 Files, 2 Folders I 00:34:39 Content Type: Data I 00:34:39 Data Type: MODE1/2048 I 00:34:39 File System(s): ISO9660, Joliet, UDF (1.02) I 00:34:39 Volume Label: [Not Configured] I 00:34:39 Size: 4.698.720.045 bytes I 00:34:39 Sectors: 2.294.303 I 00:34:39 Image Size: 4.699.357.184 bytes I 00:34:39 Image Sectors: 2.294.608 I 00:34:39 Operation Successfully Completed! - Duration: 00:00:00 I 00:37:10 Project Successfully Saved! I 00:37:10 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012.ibb I 00:37:21 Project Successfully Saved! I 00:37:21 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012.ibb I 00:37:24 Operation Started! I 00:37:24 Building Image Tree... I 00:37:24 Checking Directory Depth... I 00:37:24 Calculating Totals... I 00:37:24 Preparing Image... I 00:37:25 Checking Path Length... I 00:37:25 Contents: 14 Files, 3 Folders I 00:37:25 Content Type: Data I 00:37:25 Data Type: MODE1/2048 I 00:37:25 File System(s): ISO9660, Joliet, UDF (1.02) I 00:37:25 Volume Label: Hännesken2012 I 00:37:25 Size: 4.698.720.045 bytes I 00:37:25 Sectors: 2.294.303 I 00:37:25 Image Size: 4.699.357.184 bytes I 00:37:25 Image Sectors: 2.294.608 I 00:37:40 Operation Successfully Completed! - Duration: 00:00:15 I 00:37:40 Operation Started! I 00:37:40 Source File: -==/\/[bUILD IMAGE]\/\==- I 00:37:40 Source File Sectors: 2.294.608 (MODE1/2048) I 00:37:40 Source File Size: 4.699.357.184 bytes I 00:37:40 Source File Volume Identifier: Hännesken2012 I 00:37:40 Source File Volume Set Identifier: 405B04AC00230344 I 00:37:40 Source File Application Identifier: ImgBurn v2.5.6.0 - The Ultimate Image Burner! I 00:37:40 Source File Implementation Identifier: ImgBurn I 00:37:40 Source File File System(s): ISO9660; Joliet; UDF (1.02) I 00:37:40 Destination Device: [0:0:0] HL-DT-ST DVDRAM GP10NB21 1.00 (G:) (USB) I 00:37:40 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) I 00:37:40 Destination Media Supported Write Speeds: 4x; 8x I 00:37:40 Destination Media Sectors: 2.295.104 I 00:37:40 Write Mode: DVD I 00:37:40 Write Type: DAO I 00:37:40 Write Speed: MAX I 00:37:40 DVD+R Reserve Track: No I 00:37:40 Link Size: Auto I 00:37:40 Lock Volume: Yes I 00:37:40 Test Mode: No I 00:37:40 OPC: No I 00:37:40 BURN-Proof: Enabled W 00:37:41 DeviceIoControl(IOCTL_CDROM_EXCLUSIVE_ACCESS, Lock, 1) Not Supported! - Reason: Die Anforderung wird nicht unterstützt. I 00:37:41 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x) I 00:37:41 Book Type Setting: DVD-ROM I 00:38:39 Filling Buffer... (40 MB) I 00:38:44 Writing LeadIn... I 00:39:04 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294607) I 00:39:04 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294607) I 00:49:02 Synchronising Cache... I 00:49:05 Closing Track... I 00:49:08 Finalising Disc... I 00:49:23 Exporting Graph Data... I 00:49:23 Graph Data File: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GP10NB21_1.00_MONTAG-27-FEBRUAR-2012_00-37_RITEK-F16-01_MAX.ibg I 00:49:23 Export Successfully Completed! I 00:49:23 Operation Successfully Completed! - Duration: 00:11:42 I 00:49:23 Average Write Rate: 7.687 KB/s (5.6x) - Maximum Write Rate: 11.290 KB/s (8.2x) I 00:54:06 Project Successfully Saved! I 00:54:06 File Name: C:\Dokumente und Einstellungen\DINGS\Anwendungsdaten\ImgBurn\Project Files\Hännesken2012 Gebrannt.ibb So... all worked fine yesterday with that DVD, but next time I burn, I first need the burn Mode (CTRL+Shift+B ) - then click "burn", 2) after finish burning I need Verify mode (CTRL+Shift+V ) in order to get access (viewing current DIR, open files, etc.) to the previous empty and now filled (burnd) DVD dics? Is it that what you mentioned? Edited February 27, 2012 by HeftCD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2012 Share Posted February 27, 2012 No, you don't have to use Verify mode (actually, you can't use it because you're building+burning on the fly), you just leave the little 'Verify' box ticked under where you pick the 'Destination' device. Do you have Autorun/insert enabled? Link to comment Share on other sites More sharing options...
HeftCD Posted February 27, 2012 Author Share Posted February 27, 2012 Autorun/insert in IMGBurn? (where is it ?) Or Windows? in Windows I disabled Autorun because of possible Trojans/viruses and so on. (since 2001; and never had trojans by this way ) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2012 Share Posted February 27, 2012 Windows options... but ImgBurn can show their current state. Look in the Settings on the 'Device' tab. You should see an 'Operating System Options' box. Are all 3 checkboxes checked? Link to comment Share on other sites More sharing options...
HeftCD Posted February 27, 2012 Author Share Posted February 27, 2012 (edited) I found this option by your tip now. I checked only "after write" and I think that is enough thanks .. I will hope this will solve the problem. ehm, any further another question.... where Do you come from? What GMT is it at yours? GERMANY, Dortmund (Nordrheinwestfalen) here it is now Monday 23:23 (MO, 11:23 pm) Just to know when you read posts in forum Thanks Edited February 27, 2012 by HeftCD Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 27, 2012 Share Posted February 27, 2012 Going by that screenshot, 'Auto Insert Notification' (MCN) is indeed disabled on your PC. You don't need to disable MCN itself, doing that causes more harm than good. Windows uses it to detect changes to the drive's status/discs. All you need to do is disable Autoplay if you're worried about discs auto running and giving you viruses. What kind of dodgy places are you getting your discs from anyway to have to worry about such things?! As my 'Location' (left column of my posts) states, I'm from the UK. Link to comment Share on other sites More sharing options...
Recommended Posts